obd2shop

utorak, 30.09.2025.

Guide: Writing VIN Code on a 2022 Aprilia RS660 Using OBDSTAR MOTOMASTER

This guide provides step-by-step instructions on how to write a new VIN code to the ECU of a 2022 Aprilia RS660 motorcycle using the OBDSTAR MOTOMASTER diagnostic tool.

Tools Required:
MOTOMASTER Scanner
M041 Cable
Main Cable

For cable selection and diagnostic port locations, you can also download the OBDSTAR App for quick reference: OBDSTAR App Download.

Step 1: Locate the Diagnostic Port
On the Aprilia RS660, the diagnostic port is located under the seat.
Use the ignition key to unlock and remove the seat from the rear section of the bike.

Step 2: Connect the Device
Connect the M041 cable and main cable to the diagnostic port.
Plug the other end into the MOTOMASTER scanner.
Turn the motorcycle key to the ON position.

Step 3: Select Vehicle Model in MOTOMASTER
On the MOTOMASTER tablet:
Go to [MOTO Diag]
Select [APRILIA]
Choose [APRILIA V33.10]
Tap [Diagnosis] ’ [By Model]
Select [APRILIA / R / RS / 660 E5 / 2020-]
Perform [Auto Scan] ’ [Scan ECU]

Step 4: Access ECU Information
Tap [ECU Information] to view the existing VIN and other vehicle data.

Step 5: Write the VIN Code
Select [Special Function] ’ [Agree]
Choose [Write VIN] ’ [OK]
Warning: This function overwrites the VIN. Proceed with caution.
Enter the 17-digit VIN code and press OK.

Step 6: Complete the Process
Turn off the dashboard and wait until communication with the ECU ends, then press OK.
Turn the key back ON and press OK to continue.
The system will confirm that the procedure has been completed.

Step 7: Verify the VIN Update
Go back to [ECU Information] to confirm that the VIN has been updated correctly.

You have now successfully written the VIN code on a 2022 Aprilia RS660 using OBDSTAR MOTOMASTER.

For more tools and solutions, visit: www.obd2shop.co.uk.

Oznake: obdstar motomaster

30.09.2025. u 08:20 • 0 Komentara • Print • # • ^

ponedjeljak, 29.09.2025.

Solved: Yanhua ACDP 2016 BMW G12 750i "Obtain password error"

Problem: When using the YANHUA Mini ACDP to program a 2016 BMW G12 750i for an all keys lost situation, the newly programmed key starts the engine, and the remote control works correctly. However, in the final step - synchronizing the EGS (Electronic Gearbox Control) and EWS (Immobilizer) - the tool shows an error:

"Obtain password error, please contact technical support!"

The system and immobilizer information were read, but the process could not be completed.

Solution
This YANHUA ACDP error often occurs on BMW models with two engine control units. If the EGS password cannot be retrieved, it usually means the incorrect engine control unit data was read.

For BMW vehicles with two engines during an all keys lost procedure, you must read the EEPROM data from the main engine control unit, not the secondary one. Reading data from the wrong unit will result in a password read failure.

Ensure you identify and read the data from the correct ECU to complete the EGS/EWS synchronization.

Technical Support
Email: Sales@OBD2shop.co.uk
WhatsApp: +86 13983755934
Telephone: +86 13983755934
WeChat: +86 13983755934

www.obd2shop.co.uk

Oznake: yanhua acdp 2

29.09.2025. u 08:13 • 0 Komentara • Print • # • ^

petak, 26.09.2025.

TOPDON TopScan Pro OBD2 Scanner User Manual

Thank you for choosing the TOPDON TopScan Pro, a powerful and user-friendly OBD2 diagnostic scanner. This guide provides simple step-by-step instructions to get you started with vehicle diagnostics quickly. Please follow the steps below to set up your device and the accompanying TopScan APP.

1. Download & Install the APP
Go to the App Store (for iOS) or Google Play (for Android) and search for the "TopScan" APP to download and install it on your mobile device.

2. Register & Log In
Open the TopScan APP. Log in using your existing TOPDON account credentials. If you are a new user, please register for an account using your email address.

3. Bind the VCI
Navigate to the Me section within the APP, then select VCI Management and tap Add VCI.
To retrieve the serial number and activation code, scan the QR code located on the TopScan device itself. Alternatively, once your phone successfully pairs with the TopScan via Bluetooth, the serial number and activation code will often be recognized automatically. Finally, tap the Activate button to complete the binding process.

4. Download the Diagnostic Software
The first time you use the diagnostic function, you will need to download the specific software for your vehicle. From the APP's home screen, tap Vehicle Diagnosis and proceed to download the required software package.

5. Connect to the Vehicle
Locate the vehicle's OBD-II port, which is typically found under the dashboard. Plug the TopScan Pro device firmly into this port.

6. Power On the Vehicle Systems
Turn the vehicle's ignition to the "ON" position (without starting the engine). You will know the TopScan device is receiving power when its red LED light illuminates.

7. Establish Bluetooth Connection
On the APP's home screen, tap Vehicle Diagnosis. Then, tap on the VCI option, usually located at the top right corner of the screen, to initiate the Bluetooth connection with the TopScan unit. A successful connection is indicated by the LED light on the device turning a solid blue color.

8. Ready for Diagnosis
Your TOPDON TopScan Pro is now successfully connected, configured, and ready to perform vehicle diagnostics.

TOPDON TopScan Upgrade Instructions

Software Updates: All downloaded vehicle-specific software packages are listed on the software download page within the APP. If a newer version of a software package becomes available, an "Update" button will appear next to it. Simply tap this button to update the software.

Firmware Updates: To update the device firmware, go to the Me section in the APP and select Firmware Upgrade. If a new firmware version is available, you will be prompted to proceed with the update.

www.obd2shop.co.uk

Oznake: topdon topscan pro

26.09.2025. u 10:24 • 0 Komentara • Print • # • ^

četvrtak, 25.09.2025.

Launch X431 PRO3S+ Elite Registration and Update Guide

This article will guide you through registering and updating your Launch X431 PRO3S+ Elite diagnostic tool.

Initial Activation: Registration
Registration is a mandatory first step to activate your tool upon initial use.
1. Tap the application icon on the home screen to launch it.
2. On the screen that appears, tap Login in the upper right corner.
You will then see the following login screen:

From this screen, please follow the instructions that apply to your situation:
A. New User: Proceed with New Registration.
B. Registered Member: Log in directly.
C. Sub-account/Bound Tool: Use Technician login.
D. Forgot Password: Reset your password.

A. For New Users: New Registration
1. Tap New Registration to enter the sign-up page.

2. Fill in the information in each field on the form. Items marked with an asterisk (*) are mandatory.

3. After inputting your details, tap Register. A screen for activating your device will appear.

4. Enter the 12-digit Product Serial Number and the 8-digit Activation Code (found in the password envelope).

5. Tap Activate.
Upon successful activation, a confirmation screen will appear.

6. Tap OK. You will be directed to the update center to install all available software.

Important Note: After registration is complete, the wireless connection between the tablet and the SmartLink C device is established automatically. No manual configuration is required.

B. For Registered Members
If you already have a registered account:
1. Enter your Username and Password.
2. Tap Login to access the main menu directly.

Note: The tablet features an auto-save function. Once you correctly enter your username and password, the system stores them. You will not need to enter them manually for subsequent logins.

C. Login with a Sub-account
If you have created a sub-account or have bound an existing account to this specific tool:
1. Tap Technician login.
2. Enter your credentials to log in to the system.

D. If You Forgot Your Password
If you have forgotten your password:
1. Tap Retrieve password.
2. Follow the on-screen instructions to set a new password.

www.obd2shop.co.uk

Oznake: launch x431 pro3s+

25.09.2025. u 04:02 • 0 Komentara • Print • # • ^

srijeda, 24.09.2025.

How to Activate Magic Motorsport Flex ECU Tool Software?

Welcome to the official activation guide for Magic Motorsport's Flex Chip tuning Tool ECUs Software. This step-by-step tutorial will help you quickly and securely activate your product through the Helpdesk portal.

Step-By-Step to Activate FLEX ECU & TCUs Programmer:
lStep 1: Log In to Select Product Activation
Go to the Magic Motorsport Helpdesk and log in using your credentials.
If you don't have an account, you'll need to create one first.

Once logged in, look for the "Products Activation" section in the main menu.
Click on it to proceed.

lStep 2: Activate a New Product
Click the "Activate New Products" button.
You'll see a list of already activated products (if any) and a form to add new ones.

lStep 3: Fill in the Activation Form
You will need to enter the following information accurately:
Invoice Number
Flex Serial Number
FlexBox Serial Number (if applicable)
Software Number

Important Security Notice:
You have only 3 attempts to enter each serial number correctly.
If all attempts are used unsuccessfully, your Helpdesk account will be blocked for security reasons.

Activating your Flex Chip tuning Tool is straightforward if you follow these steps carefully. Always double-check your serial numbers to avoid account blocks.

For more tutorials and updates, visit the News section in your Helpdesk.
www.obd2shop.co.uk

Oznake: Motorsport Flex ECU Tool

24.09.2025. u 10:37 • 0 Komentara • Print • # • ^

ponedjeljak, 22.09.2025.

XTOOLD8W vsD9Svs D9SPro vs D9 Max Comparison Guide

Choosing the right diagnostic tool can be a challenging task. This comparison breaks down four popular XTOOL models: the D8W, D9S, D9S Pro, and D9 Max. All run on Android 10 with a Quad-core 1.5GHz processor and offer 3 years of free updates. But key differences set them apart.

XTOOL Diagnostic Scanner Comparison

Key Functional Differences
All models include:
1. Full system diagnostics
2. OBDII functions
3. Live data, coding, and ADAS calibration
4. Key programming and bidirectional control

Notable variations:
lBMW Test Plan: Available on D9S, D9S Pro, and D9 Max. Not on D8W.
lOnline Programming: Only available on D9S Pro and D9 Max.
lJ2534 Support: Exclusive to the D9 Max.
lSpecial Functions: D8W has 38+, others have 42+.

Which One Should You Choose?
XTOOL D8W: Best for beginners or small shops. Good basic features. Lower cost.

XTOOL D9S: Mid-range option. Extra memory and BMW support. Good value.

XTOOL D9S Pro: For professionals. Adds online programming. Broader vehicle coverage.

XTOOL D9 Max: Top-tier model. Includes J2534. Ideal for advanced users and dealerships.

All models support Type-C charging, WiFi & cable connections, and CANFD/DOIP protocols. Each also requires contacting support for mileage correction.

Choose based on your budget and need for advanced functions like online programming or J2534 support.

www.obd2shop.co.uk

22.09.2025. u 08:48 • 0 Komentara • Print • # • ^

petak, 19.09.2025.

Using OBDSTAR DC706 to do BAIC Delphi MT80 IMMO OFF via Bench

This guide provides step-by-step instructions on how to perform an immobilizer (IMMO) off procedure on the BAIC Delphi MT80 Engine Control Module (ECM) using the OBDSTAR DC706 tool via the bench method.

Tools Required
OBDSTAR DC706 (X300 Classic G3)
High-power DC regulated power supply
Main cable
ECU clone jumper
MP001 programmer
BAIC Delphi MT80 ECM

Preparation
1. Ensure your DC706 device is updated to the latest software version.
2. Power on the tool and navigate to the main menu.

Step-by-Step Procedure
1. Enter ECM Flasher Menu
Tap [ECU Flasher] ’ [ECM] ’ [ECM V32.30].
Use the search function in the upper right corner to quickly locate the corresponding option if needed.

2. Select Guide Mode
Tap [Guide] and carefully review:
Warm reminders
Menu descriptions
Operation guide
Connection methods
Special notes

3. Select Adapter
Choose the appropriate adapter. For this procedure, select the MP001 multifunctional programmer.

4. Confirm ECU and Pinout
Confirm the ECU appearance matches the image shown on the device.
Tap [Connector Pinout] to view the wiring diagram.
Refer to the diagram and make all necessary connections.

5. Backup Original Data
Once connected successfully, back up the original flash data.
Ensure you have a stable internet connection, as this step requires server communication.
You may customize the backup file name. The save path and operation records will be displayed on the left side of the screen.

6. Perform IMMO OFF
Tap [IMMO OFF] to disable the immobilizer system.
Wait for the operation to complete.

Completion
The IMMO OFF procedure is now complete. You may now disconnect the equipment and reassemble the vehicle.

For more information or to purchase tools, visit: www.obd2shop.co.uk.

Video guides:
https://youtu.be/clVcnQOKDOE

Oznake: obdstar dc706

19.09.2025. u 08:58 • 0 Komentara • Print • # • ^

četvrtak, 18.09.2025.

Using the KEYDIY Toyota 8A All-Lost Key Adapter

This guide provides step-by-step instructions for using the KEYDIY Toyota 8A All Keys Lost Adapter. Each step includes references to the corresponding diagrams for clarity.

Adapter Components Overview
The adapter kit includes the following labeled components:
` Relay
a Large clip – clamps to the positive terminal of the battery
b Small clip – clamps to the positive terminal harness of the car battery
c Key inspection line plug (white)
d OBD connector – plugs into the vehicle’s OBD port
e OBD connector – plugs into the KEYDIY device (e.g., KD-X4)
f Fuse plug – inserts into the position of the unplugged fuse

Step-by-Step Instructions

Step 1: Battery Connection
Disconnect the positive terminal of the car battery.
Use the large clip (No. 2) to clamp the positive terminal of the battery.
Use the small clip (No. 3) to clamp the positive terminal harness of the car battery.

Step 2: Locate and Unplug the White Connector
Remove the steering wheel cover panel.
Locate the white connector and unplug it.

Step 3: Connect the Key Inspection Line
Insert the white key inspection line plug (No. 4) into the slot of the unplugged white connector.

Step 4: Fuse Replacement
Move to the driver’s footwell and locate the fuse box.
Identify the correct fuse location based on your vehicle model (see the figure below for fuse locations).

Remove the specified fuse and plug in the fuse plug (No. 7) into the same slot.

Step 5: OBD Connections
Plug the OBD connector (No. 5) into the vehicle’s OBD port.
Connect the OBD connector (No. 6) to your KEYDIY device (e.g., KD-X4).

Completion
Once all connections are made, proceed with the all-keys-lost programming process using your KEYDIY device as per its instructions.

Note:
Always follow safety precautions when working with car batteries and electrical systems.
Ensure all connections are secure before initiating the programming process.
For further support, visit www.obd2shop.co.uk.

Oznake: keydiy adapter

18.09.2025. u 03:36 • 0 Komentara • Print • # • ^

srijeda, 17.09.2025.

Bypass 2022+ Volvo Security: Use KEYDIY CEM-SPC5747G Adapter

Tired of turning away newer Volvo and Lynk & Co key programming jobs? The security on these vehicles is tighter than ever - but now there's a professional solution. Introducing the KEYDIY Volvo CEM-SPC5747G Adapter - your ultimate tool for programming keys on 2022 and later models quickly, securely, and profitably.

What Makes This Adapter a Must-Have:
lPerfect Fit for New Models: Specifically engineered for Volvo & Lynk & Co vehicles (2022+) with SPC5747G CEM modules.

lWorks Flawlessly with KD-X4: Plug and play with your KEYDIY KD-X4 Programmer- no extra hardware needed.

lProgram Both Semi-Smart & 8A Smart Keys: Read CEM data directly and program keys with confidence.

lSimple and Technician-Friendly: Clear connection and process - get the job done right, every time.

Start Programming in 3 Easy Steps:
1. Grab Your Adapter - Get the VOLVO KDADP2502 Special Adapter.

2. Unlock the Function - Use 3500 KD-Coins (H$50) to activate "Volvo Programming" in your KEYDIY App.

3. Read & Program - Connect to the vehicle's CEM, read the data, and program new keys effortlessly.

Why You Need This Tool in Your Shop:
The number of post-2022 Volvos on the road is growing - and so is your opportunity. Don't say "no" to these jobs anymore. With KEYDIY’s dedicated adapter, you can:
Offer a service most competitors can't
Increase your revenue with premium key programming
Build a reputation as the go-to expert for modern European vehicles

Stop missing out. It's time to upgrade your service capability with KEYDIY.

Get the adapter today - and never turn away a Volvo key job again!

Ready to boost your business?
Click below to order now:

www.obd2shop.co.uk

Oznake: keydiy kd x4

17.09.2025. u 03:51 • 0 Komentara • Print • # • ^

utorak, 16.09.2025.

Toyota R7F701441 Mileage Correction with ACDP Module 41

This article provides a step-by-step guide on how to perform mileage correction on a Toyota R7F701441 instrument cluster via OBD/CAN method using the Yanhua ACDP 2 and ACDP Module 41.

Preparation:

As shown in the picture, connect the ACDP device to the vehicle’s OBD interface.
Open the ACDP application and ensure that the ACDP programmer is bound (check the top right corner of the screen).

Entering the Correction Menu
In the ACDP app, navigate to:

"Module" ’ "TOYOTA ODO" ’ "OBD/CAN Reset mileage"
Then, select the instrument model. This demonstration uses the R7F701441 instrument as an example.
Toyota S6J3001 mileage correction can refer to the following article:
http://blog.obd2shop.co.uk/toyota-s6j3001-mileage-correction-with-acdp-module-41/

Step 1: Identify Info
Connect ACDP to the OBD-II port.
Turn on the ignition — the ODO display must be lit.
Click "Identify Info".
The system will read instrument information. Wait until the process completes.

Step 2: Reset KM Data
Click "Reset KM data".
The system will attempt to read ODO data.
If an error occurs indicating that programming mode cannot be entered, remove the instrument cluster from the dashboard and proceed with the bench wiring method as described in the ACDP help documentation.

Step 3: Bench Connection & Data Reset
After connecting the ACDP to the instrument via the bench method, select again:
"R7F701441 ODO" ’ "Reset KM data"
The system will prompt you to back up the original ODO data. Save the file with a name ending in Orig.bin and note the backup path and time.
Enter the new mileage value.
A warning will appear:
“Programming is about to begin. Do NOT power off or unplug the device!”
Click "Continue" to start the process.
Once completed, the system will confirm: “Reset mileage finish.”

Step 4: Verify Changes
Click "Identify Info" again to check the instrument information.
The mileage should now be updated successfully.

Video Tutorial
For a visual demonstration, please watch the video:
https://www.youtube.com/shorts/HdDovtuxZ-I

Notes:
Always back up the original data before programming.
Use anti-static precautions when handling the instrument cluster.
Ensure stable power and connection during writing.
For further support, refer to the ACDP user manual or contact technical support.

www.obd2shop.co.uk

Oznake: yanhua acdp module 41

16.09.2025. u 08:57 • 0 Komentara • Print • # • ^

ponedjeljak, 15.09.2025.

VAPON Katana Decoder HU100 - Professional Automotive Lock Pick Tool

The next generation of automotive lock decoders is here - meet the VAPON Katana Decoder HU100, the latest addition to the acclaimed HU series. Designed for professionals who demand speed, strength, and simplicity, the HU100 builds on the legacy of the HU66, HU92, and SIP22 with enhanced performance and broader vehicle compatibility.

Whether you're a locksmith, roadside assistance professional, or security technician, the VAPON HU100 delivers rapid, training-free operation with exceptional reliability.

Key Features at a Glance:
1. Dual Functionality: Unlocks and reads codes seamlessly
2. User-Friendly: No training required—start right out of the box
3. Modular Design: Detachable components for easy maintenance and portability
4. High Precision: Engineered for maximum accuracy and opening efficiency
5. Durable Construction: Multi-protection design with robust materials built to last

Supported Vehicle Models:
The HU100 decodes a wide range of models from top manufacturers, including:
VAUXHALL / OPEL

AGILA
Astra (2004+), Combo Van (2004+), Corsa (2002+), Meriva (2004+)

SINTRA
Tigra (2004+), Vectra (2006+), Zafira (2004+)

HOLDEN
Astra (2004+), Barina (2004+), Combo (2004+), Tigra (2005+), Zafira (2006+), Vectra (2006+), and most models from 2006 onwards

BUICK
Allure (2009+), Lacrosse (2009+)

CADILLAC
Various Models (2007+), GENERAL MOTORS, Terrain (2010+)

CHEVROLET
Camero (2009+), Equinox (2010+), Cruze (2007+)

SATURN
Astra (2008+)

SAAB
93 (2008+), 95 (2008+)

Why Choose the Katana Decoder HU100?
lFast Operation: Open vehicles quickly without prior experience
lWide Compatibility: Covers dozens of popular models from 2002 onward
lProfessional Grade: Trusted by automotive locksmiths worldwide
lFuture-Proof Design: Ready for evolving vehicle security systems

Available Now
Upgrade your toolkit with the VAPON Katana Decoder HU100 - where innovation meets utility. Perfect for modern automotive locksmithing and emergency unlocking services.

Order yours today and experience the next level of decoding technology.

www.obd2shop.co.uk

Oznake: vapon hu100

15.09.2025. u 08:56 • 0 Komentara • Print • # • ^

petak, 12.09.2025.

Toyota S6J3001 Mileage Correction with ACDP Module 41

This article provides a step-by-step guide on how to perform mileage correction on a Toyota S6J3001 instrument cluster using the ACDP and ACDP Module 41.

Preparation:
As shown in the picture, connect the ACDP device to the vehicle’s OBD interface.
Open the ACDP application and ensure that the ACDP programmer is bound (check the top right corner of the screen).

Entering the Correction Menu
In the ACDP app, navigate to:
"Module" ’ "TOYOTA ODO" ’ "OBD/CAN Reset mileage"

Then, select the instrument model. This demonstration uses the S6J3001 instrument as an example.

Step 3: Bench Connection & Data Reset
After connecting the ACDP to the instrument via the bench method, select again:
"S6J3001 ODO" ’ "Reset KM data"
The system will prompt you to back up the original ODO data. Save the file with a name ending in Orig.bin and note the backup path and time.
Enter the new mileage value.
A warning will appear:
“Programming is about to begin. Do NOT power off or unplug the device!”
Click "Continue" to start the process.
Once completed, the system will confirm: “Reset mileage finish.”

Step 4: Verify Changes
Click "Identify Info" again to check the instrument information.
The mileage should now be updated successfully.

Video Tutorial
For a visual demonstration, please watch the video:
https://youtu.be/-tOxF4RO_E4

Notes:
Always back up the original data before programming.
Use anti-static precautions when handling the instrument cluster.
Ensure stable power and connection during writing.
For further support, refer to the ACDP user manual or contact technical support.

www.obd2shop.co.uk

Oznake: yanhua acdp module 41

12.09.2025. u 04:42 • 0 Komentara • Print • # • ^

četvrtak, 11.09.2025.

How to Reset Your Launch X-431 Diagnostic Tool Password

If you have forgotten the password for your Launch X-431 diagnostic tool, you can easily reset it by following the steps below.

Step 1: Access Password Reset Option
Select the “Set/Reset Password” option on your device. This will take you to the password recovery screen.

Step 2: Enter Device Serial Number
You will be prompted to enter your device serial number.
This is a 12-digit number starting with 9.
Once entered, the system will automatically display the registered username and email address associated with the device.

Step 3: Choose Password Reset Method
Select the option to reset your password via email.

Step 4: Get Verification Code
A verification code will be sent automatically to your registered email address.

Check your inbox (and spam/junk folder, if necessary) for the email containing the code.

Step 5: Enter Verification Code and New Password
Enter the verification code you received.
Create a new password. You will need to enter it twice for confirmation.

Your password must meet the following requirements:
Length between 8 and 20 characters
Must include:
Uppercase letters
Lowercase letters
Digits (0-9)
Special characters (e.g., @#$%^&*()_+-=)

If the two entries do not match, you will see an error message:
“The passwords entered twice are inconsistent.”

Important Note:
If you no longer have access to the registered email address or encounter any issues during the process, please contact support at www.obd2shop.co.uk.

Oznake: Launch X431

11.09.2025. u 04:51 • 0 Komentara • Print • # • ^

srijeda, 10.09.2025.

KEYDIY KD-MP 5-in-1 Bundle w/Free GiftsOffer Ends Oct 9

For a limited time only, until October 9th, unlock incredible value with the KEYDIY KD-MP Five-in-One Promotion Package - the smart choice for automotive locksmiths, car key professionals, and DIY enthusiasts!

What’s Included in the KD-MP Promotion Package?
This powerful package contains everything you need to program keys for a wide range of vehicles with ease and confidence:
- KD-MP Complete Device Set × 1
- MLB08 Key (Non-OEM Solution) × 1
- MLB19 Key (OEM Solution) × 1
- MLB26 Key (OEM Solution) × 1
- KD-MATE Programmer × 1
- KD-MP PROGRAM KIT (Compatible with MQB/MLB platforms)

Exclusive Free Gift - Limited Time Only!
Order now and receive FREE:
1 × High-Quality 12V Power Supply
5 × 1.8PF Capacitors

Perfect for ensuring smooth and stable performance during all your key programming sessions!

Why Choose the KEYDIY KD-MP Package?
lWide Vehicle Coverage: Supports both OEM and non-OEM key solutions for popular platforms like MQB and MLB.

lUser-Friendly: Designed for professionals and beginners alike.

lAll-in-One Convenience: No need to purchase separate tools - everything is included in one budget-friendly bundle.

lReliable Performance: Trusted by automotive technicians worldwide.

Don’t Miss Out - Offer Ends October 9!
This special promotion won't last long. Stock up now and elevate your key programming capabilities with KEYDIY's top-quality equipment.

Click to Order Yours Today & Secure Your Free Gift!
Perfect for locksmiths, car garage owners, key makers, and automotive enthusiasts looking to expand their service offerings efficiently and affordably.

Grab your KEYDIY KD-MP Package now before this offer expires!

You may also like:
KEYDIY Deal: FREE KD-X4 Tool with $1,500 KD Remote Purchase!
http://blog.obd2shop.co.uk/keydiy-deal-free-kd-x4-tool-with-1500-kd-remote-purchase/

www.obd2shop.co.uk

Oznake: keydiy kd mp 5-in-1

10.09.2025. u 05:28 • 0 Komentara • Print • # • ^

utorak, 09.09.2025.

Mastering Toyota Cluster Mileage Correction with Yanhua ACDP Module 41

In the field of automotive repair and adjustment, odometer (mileage) correction is a highly specialized task. It’s often required in scenarios such as instrument cluster replacement, ECU swap, or restoring a repaired dashboard. The Yanhua ACDP system, with its modular design and user-friendly interface, has become a trusted solution for professionals worldwide.

Today, let’s take a closer look at ACDP Module 41, which is specifically designed for Toyota clusters using R7F7014xx and S6J3xx chips.

Two Versions Available:
1. Module 41 License (for users who already own Module 35)
If you already have Module 35, you only need to purchase the Module 41 license to unlock mileage correction features. This is a cost-effective solution since you don’t need to buy extra hardware.

2. Full Module 41 Package (standalone)
For new users who don’t own Module 35, the standalone Module 41 is the right choice. It includes the necessary authorization and works independently for Toyota mileage correction.

Supported Chip Types:
Both versions of Module 41 support the following instrument cluster chips:
1. Support Toyota S6J3001 (2019-) encrypted/unencrypted chips instrument mileage correction via OBD/CAN method.
2. Support Toyota R7F701401 (2021-) encrypted/unencrypted chips instrument mileage correction via OBD/CAN method.
3. Support Toyota R7F701441 encrypted chips instrument mileage correction via the OBD/CAN method.

Supported Vehicle List:
Please note that the car model list below is for reference purposes only. If you have any questions, please feel free to contact us.

Conclusion:
Yanhua ACDP Module 41 is a powerful and flexible tool for Toyota mileage correction, offering options that suit both existing ACDP users and newcomers. Whether you’re maintaining, repairing, or replacing Toyota clusters, this module provides a safe and efficient solution.

www.obd2shop.co.uk

Oznake: yanhua acdp module 41

09.09.2025. u 08:42 • 0 Komentara • Print • # • ^

KEYDIY KD-X4 Now Support: BMW G Chassis BDC3 & BCP Add Key

KEYDIY continues to enhance its automotive locksmith solutions with a significant upgrade to the KD-X4 Key Programmer device. The latest update introduces the ability to add spare keys for BMW G Chassis with BDC3 and BMW U Chassis with BCP immobilizer systems—an essential feature for locksmiths and automotive professionals.

Key Features of the KD-X4 BMW Update:

1. Add Keys for BDC3 & BCP: Perform key additions for BMW G Series (BDC3) and U Series (BCP) easily.
2. License Activation: Requires the BMW G Chassis Programming Function license (already included if you previously activated FEM/BDC2 functions - no need to repurchase).
3. Cost-Effective: Only 200 points or $4 USD per key added, billed directly via the KEYDIY App.
4. Compatible Remotes: Must be used with KEYDIY KD FGB Remotes (FGB23 or FGB57 models recommended).
5. Not All Keys Lost: This function is for adding keys only. Does not support all-keys-lost situations.
6. Original Key Required: You must disassemble and read data from the original key to program a new one.

Which KEYDIY Remotes to Use?
FGB23 Remote: Ideal for BMW FEM, BDC, CAS4, CAS4+, and G Chassis key generation. Also functions as a ZB key.

FGB57 Remote: The latest key remote for BMW, compatible with FEM, BDC, CAS4, CAS4+, and G Chassis. It can also be used as a ZB key.

Upgrade Offer:
Existing KEYDIY KD-X4 users who have already activated BMW programming functions will receive this update at no additional cost. Simply update your device and app to start using the new features.

Summary:
Device: KEYDIY KD-X4
New Support: BMW G Chassis BDC3 & U Chassis BCP
License: Shared with existing FEM/BDC2 authorization
Cost per Key: 200 points or $4 USD
Remotes: Use KD FGB remotes only
Function: Add key only (original key required)

Elevate your BMW key programming services with the enhanced KEYDIY KD-X4. Perfect for automotive locksmiths looking to expand their service offerings with reliable and affordable BMW key solutions.

www.obd2shop.co.uk

Oznake: keydiy kd x4

09.09.2025. u 05:15 • 0 Komentara • Print • # • ^

ponedjeljak, 08.09.2025.

How to Check Vehicle Coverage for IM508S, IM608II, and KM100

When working with Autel IMMO devices such as the IM508S, IM608II, and KM100, one of the most common questions users ask is how to check vehicle coverage. Recently, some changes have been made to the availability of coverage information. Below are the key updates and solutions:

1. Vehicle Coverage Updates

The official coverage details for KM100, IM508S (IMMO), and IM608II (IMMO) have been removed from online.

2. Alternative Coverage Check

Since the IM1 (IMMO) software functions are identical to IM508S and IM608II, users can check their vehicle coverage through the OTOFIX website:
OTOFIX Vehicle Coverage Tool

Steps:
Visit the website.
Select your device (e.g., IM1 (IMMO) or IM2 (IMMO)).
Choose the vehicle brand.
Enter details such as model and year.

3. KM100 Function Reference

For KM100, coverage information is provided in the PDF document:
"KM100(IMMO)_Vehicle_coverage_final_version.pdf"

This serves as the official list of functions.

4. Tablet Function Lookup

On-device users can directly check available functions via the Function Viewer or MaxiViewer app.

With these methods, users of IM508S, IM608II, and KM100 can still reliably access vehicle coverage and function details despite the removal of online listings.

www.obd2shop.co.uk

Oznake: Autel

08.09.2025. u 09:34 • 0 Komentara • Print • # • ^

četvrtak, 04.09.2025.

Cutting VW Beetle HU66 Keys with Xhorse Dolphin XP005

This guide shows you how to use the Xhorse Dolphin XP005 Key Cutting Machine to cut a HU66 key for a 2000 Volkswagen Beetle in an All Keys Lost (AKL) situation.

We’ll also connect the VVDI Key Tool Max with the Dolphin XP005 for operation. Alternatively, you can control the process directly via the Xhorse App installed on a smartphone.

Step 1: Select Key and Enter Code
From the main menu, select All Keys Lost ’ Volkswagen
Enter the key code: 0798
Select HU66, 8 bitting, 820×2800

Step 2: Set Up the Key Blank
Install the M2-C clamp with the shoulder aligned as prompted
Place the HU66 key blank flat and secure it in the clamp
Press “OK” to confirm

Step 3: Decode and Verify Bitting
The decoded bitting code is: 22433444
Always double-check the code for accuracy before proceeding

Step 4: Begin Cutting
Select Cutting Key ’ Continue
The Dolphin XP005 will start cutting the first side automatically

Step 5: Flip and Cut the Second Side
Once the first side is complete, clean any metal debris
Remove the key, flip it over, and reposition it flat in the clamp
Press Cutting Key ’ Continue again
The machine will proceed to cut the reverse side

Step 6: Test the Key
After cutting is complete, test the key in the vehicle’s lock
The key turns smoothly and operates perfectly
Image 9

Done!
The HU66 key has been successfully cut for the 2000 Volkswagen Beetle using the Xhorse Dolphin XP005 key cutting machine.

www.obd2shop.co.uk

Oznake: xhorse dolphin xp005

04.09.2025. u 05:41 • 0 Komentara • Print • # • ^

srijeda, 03.09.2025.

Final Chance: Alientech KESS V3 Summer Sale Ends September 8th

Time is running out! Alientech's limited-time summer promotion for the powerful KESS V3 tuning tool ends in just 5 days - on September 8th. This is your final chance to upgrade your diagnostic and tuning toolkit at unbeatable prices.

Whether you're a professional tuner or looking to expand your capabilities, the KESS V3 Master and Slave units offer unparalleled performance with support for CAR, LCV, Trucks, Tractors, and Buses via both OBD and Bench/Boot protocols.

Limited-Time Promotion Offers:

Don't Miss Out - Offer Ends September 8th!
This is a rare opportunity to get your hands on Alientech's industry-leading tuning solutions with huge discounts and bonus protocols - completely free.

Shop now and save big:
www.obd2shop.co.uk

Upgrade your toolbox, enhance your tuning capabilities, and save thousands before it's too late!

Oznake: alientech kess v3

03.09.2025. u 04:26 • 0 Komentara • Print • # • ^

utorak, 02.09.2025.

Keydiy KD-X2 LCD Replacement Tutorial

Replacing the LCD screen of the Keydiy KD-X2 requires patience, careful handling, and the right tools. Follow this step-by-step guide to safely disassemble the device and install a new display.

Tools & Materials Needed:
Precision screwdriver set
Anti-static wristband
Electric soldering iron (set to 350)
Hot air gun (set to 300)
Board cleaning solution (board washing water)
Tweezers
New KD-X2 LCD

Full operation video:
https://youtu.be/ZcRZXPraGtI

Step 1: Remove the Back Cover
Remove the two rubber pads on the back of the device.
Unscrew the two screws hidden inside.
Remove one additional screw located on the back.
Take out the battery to expose the inner screws.
Remove the four screws inside to release the shell.
Note: Before touching the mainboard, always wear an anti-static wristband to avoid damaging components.

Step 2: Disassemble the Mainboard
Under the silicone pad near the coil, remove the hidden screw.
Disconnect the three ribbon cables.
Press the bottom of the mainboard to remove the small PCB board and coil together.
Remove one more screw that secures the mainboard.
Carefully take out the mainboard.

Step 3: Remove the Old Display
Locate the display on the mainboard.
Peel off the back adhesive of the display.
Use a soldering iron (350) to detach the display ribbon cable from the solder pad.
Flip the mainboard and heat the display with a hot air gun at 300 to soften the adhesive.
Gently lift the display from the mainboard.

Step 4: Install the New Display
Peel off the double-sided adhesive on the back of the new display.
Align and stick the display to the printed display position on the mainboard.
Do not exceed the border of the display frame.
Remove the protective film from the new display.
Align the ribbon cable with the solder pad.
Use a soldering iron to fix the ribbon cable in place, then apply tin to perform drag soldering.
Ensure there are no short circuits.

Step 5: Finishing Up
Clean the solder joints with board washing water.
Use adhesive tape to secure the soldered area.
Reassemble the device in reverse order of disassembly.

Your KD-X2 now has a brand-new LCD installed.

www.obd2shop.co.uk

Oznake: keydiy kd x2

02.09.2025. u 09:01 • 0 Komentara • Print • # • ^

ponedjeljak, 01.09.2025.

Lonsdor K518 PRO Program 2024 Nissan Rogue All Keys Lost

Learn how to program the 2024 Nissan Rogue all keys lost using the Lonsdor K518 PRO Key Programmer via OBD. This step-by-step tutorial covers BCM connection, key ID reading, and smart key programming for a complete vehicle restart.

Tools Required
Lonsdor K518 PRO
NISSAN 40PIN-BCM Cable
2024 Nissan Rogue
A New Key

Immo & Remote >> NISSAN >> Select from vehicle >> North America >> Rogue >> 2021-2023 >> Smart key(PUSH button) >> All smart key lost

This function requires unplugging the BCM connector, then using the Nissan-40 Specific Cable to connect the BCM, and pressing OK to continue.

All keys of this vehicle must be reprogrammed. Press OK to continue.

Turn the ignition off.
Turn on Hazard warning lights.
Stay at P or Neutral gear;
The steering column is in the unlocked state.
Press OK.

Start to read the key ID:
Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.

Note:
1. Do not move the key from the ignition.
2. Do not press any button.
3. Do not insert or remove the little mechanical key from the key.
Press OK.

Count of new keys: 1
Count of old keys: 0
Current key count in total: 1
Here requires to read ID of the keys to be programmed.
Click Cancel to go to the next step.

28-bit PIN has been read out.
It can be used when the program key is on AKL condition!

Start to program the key.
Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.
Press OK.

Programmed successfully, press Cancel to complete.
Count of keys programmed successfully: 1
1. Press each key's Lock and Unlock buttons, and check if it works normally.
2. Check if each key can start the car separately after finishing the above operations. Click OK to end the procedure.

After checking all keys, do not exit this function.
Operate as per the prompts below and click OK:
1. Unplug the connector, reinstall the vehicle's gateway module.
2. Connect the device to the OBD port, and turn the ignition on.

Test the new key, and all can work well.
Successfully done.