OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

ponedjeljak, 19.02.2024.

How to use Xhorse MVCI PRO J2534 Diagnostic Programming Cable

Lonsdor K518 PRO can program a car made of BMW X2, the BDC system key adding. Here we have 2 keys, one is the original key and the other is a new key. Let's have a try today.



Plug K518 PRO into the car OBD port. Enter into
IMMO(program) >> BMW >> FEM/BDC program, OBD

Step1. Read Key Data
We can see this car has already 1/2/3/4, several keys.
Read data successfully. It means this car has been pre-processed already. But if another car you met, has not pre-processed well, you have to do this part of the work first.


Step2. Backup & Restore Code
Backup code, processing...
Do you have a programmed working key? I have an original one, press OK.
Communication...
For this part, we have to make sure the battery voltage is NO lower than 13V.
Read data... about 10 minutes.
Please put a working car key into the car induction coil.
By this screenshot here, you'd better take a photo of this screen page to remember the ECU ISN number.



Step3. Learn Key
Learn after processing >> Load the SK file to learn key >> Select a key location
Follow the prompts to put the new key in the car induction coil.
Hold the new key closer to the ignition coil, and long press the Start button for 10s...
Key learning successful!

Let's try the new key.
Lock and unlock can work, it can smoothly start the car.
Done.




www.obd2shop.co.uk

Oznake: lonsdor k518 pro

19.02.2024. u 01:30 • 0 Komentara • Print • # • ^

četvrtak, 01.02.2024.

Failed Upgrade of IM508 Personal Center Prevents Update Purchase

Customer Issue: When trying to purchase an upgrade on my IM508, I was prompted to upgrade the Personal Center first. However, the upgrade process failed and resulted in the following interface. How can I resolve this?


Solutions:
Solution 1:
1. Long press the Hex Editor.
2. Click Hex Editor, Force stop, clear default, clear cache, clear data, and then act again.

Solution 2:
1. Long press the Hex Editor. Disable
2. Perform the function again
3. Setting>app>disable APK>enable the Hex Editor

We hope this is helpful. If you encounter any further issues or require additional assistance, please don't hesitate to reach out to our customer support team for further assistance.

www.obd2shop.co.uk

Oznake: autel im508

01.02.2024. u 02:13 • 0 Komentara • Print • # • ^

<< Prethodni mjesec | Sljedeći mjesec >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.