obd2shop

srijeda, 28.09.2022.

KT200 ECU Programmer + Bench Box Self Test

KT200 ECU Programmer supports ECU maintenance chip tuning, remove DTC codes, OBD/BOOT/BDM/JTAG & multiple protocols. This is a guide on how to do self test with KT200 + Bench Box.

1. Connect KT200 & BENCH BOX to PC.

2. Start KT200 software:
Select driver >> BENCH MODE >> TOOLS BENCH MODE >> TEST for BENCH BOXES >> TEST BENCH BOX V.2 >> INFO
Here you can check the operation notice.

This driver is useful for testing the Bench Box V.2
During the test:
- the relays will be triggered at different speeds.
- the read LED will flash several time
...
Before launching the driver, connect the Bench Box V.2 to the tool and power it through the round jack of the bench box itself or from the round jack of the DFOX tool.

3. OK >> Start Test
KT200 will start reading automatically...
Connect Bench Box without ECU and power it, click "OK".
Wait processing until 100%.
Test End.
Completed.

www.obd2shop.co.uk

Oznake: kt200 ecu programmer

28.09.2022. u 14:47 • 0 Komentara • Print • # • ^

ponedjeljak, 26.09.2022.

OBDSTAR X300 DP Plus Program 2020 Honda Avancier AKL by OBD

Using OBDSTAR X300 DP PLUS can program 2020 Honda Avancier all keys lost by OBD, which can save a lot of money from replacing a new IMMO box. Follow the tutorial to learn how to do it.

Tools Required
Key Master DP Plus
Main cable
Universal Remote Key

Video Guides:
https://youtu.be/lmKEfE6VGx0
Procedure
Connect X300 DP PLUS to OBD via the main cable.
We can see the IMMO indicator is on.

Car IMMO >> Honda Acura >> Latest version >> Honda >> Manual select model >> Asia >> Avancier >> Proximity >> Button >> Type 2(2019-)

Double click the Start button, ignition is still off, click "Esc".
(If the ignition is on, please click "Enter".)
Press and hold the Start button until the ignition is on.
The ignition is turned on, please release the engine Start/Stop button.

Smart key >> All smart keys lost

Programming conditions
1. No fault codes.
2. Make sure you have all proximity keys to be programmed.
Make sure the following matters, in order to minimize the noise source when programming the proximity key.
Turn off the switch, such as a navigation system and audio.
Keep the proximity key and the diagnostic tool separately by approximately 1m(3 feet). Close all windows, sunroofs and doors.
Click "Enter".

This function will erase all keys, click "Enter".

Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Place a new key to be programmed in the vehicle. Click "Enter".
Double-click the Start button, ignition is still off, click "Esc".
Press and hold the Start button until the ignition on.
The ignition is turned on, please release the engine Start/Stop button.
Is it a new model(2020 or later)? Click "Enter".

This function is available by connecting the server, please ensure the Internet connection is normal.
Input numbers of smart keys to be registered.

Take out all the registered proximity keys from the vehicle (make sure they are 2 meters away from the vehicle).
Only take 1 new smart key into the vehicle within 100s.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Please take this proximity key to be programmed out of the vehicle.
Place the first programmed key back into the vehicle.
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)
Take out all the registered proximity keys from the vehicle(make sure they are 2 meters away from the vehicle.)

Only take 2 new smart key into the vehicle within 100s.
The smart key has properly been registered.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

IMMO indicator is off, click "Enter".
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Registration has been completed.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not no depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Click "Key quantity" to check.
2 keys are registered in the ECM/PCM.
Test the keys, both can work well.
Done.

This is how to program 2020 Honda Avancier all keys lost with Obdstar X300 DP PAD2.
www.obd2shop.co.uk

Oznake: obdstar x300 dp plus

26.09.2022. u 03:05 • 0 Komentara • Print • # • ^

srijeda, 21.09.2022.

Yanhua Mini ACDP Module 28: Clone ZF-9HP Gearbox

Latest Yanhua Mini ACDP Module 28 can clone ZF-9HP gearbox in BOOT mode. Supports Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, etc. Need to work with Mini ACDP basic module.

Features
1.The Interface board can be inserted blindly to align with the boot test point, no need magnifying glass for calibration or complex probe workbench operation.
2.It's more safer and reliable to use BOOT test point with pin detection function, data read & write.
3.It's more simple & efficient to use special interface board rather than cables.

Why to buy Mini ACDP Module 28?
Traditional BOOT mode:
- Boot point needs to be aligned by human eye with magnifying glass;
- Cable connection is risky to damage module due to misoperation.

ACDP BOOT mode:
- Interface board blind insertion
- Boot test point with pin detection function.

www.obd2shop.co.uk

Oznake: yanhua mini acdp

21.09.2022. u 10:26 • 0 Komentara • Print • # • ^

utorak, 20.09.2022.

OBDSTAR MS80 Diagnose NIU E-Moto BMS&DB System

OBDSTAR MS80 Diagnose NIU E-Moto BMS&DB System
Good news! OBDSTAR MS80 Motorcycle Diagnostic Tool has launched E-Moto diagnosis software to meet the demands of the growing aftermarket. This is a quick demo on how to diagnose NIU E-Moto battery management & dashboard system.

Tool Required
OBDSTAR MS80 STD
Charger or M002 for charging
Main cable
EM001(NIU diagnosis cable)

*Please keep MS80 in charging during the whole process.

Connection
1. Connect M002 with external battery to supply power for OBDSTAR MS80. The red clipper with positive pole, the black one with negative.
2. Make sure 2 fuses of M002 are working well.
3. Charge MS80 via M002 or charger directly.
4. Connect MS80 with EM001(NIU diagnosis cable) via main cable.
5. Plug EM001 onto its diag socket.

E-MOTO Diag >> NIU >> NIU V30.00 >> Select from system >> BMS info/ DB info

l BMS Info
Make sure the power is turned off for more than 10s.
You can also connect diagnostic device to battery pack directly.

The left half of the screen shows battery information. Including state-of-charge(SOC), voltage, charge current, discharge current, values of each temperature sensor...

The other half shows battery quantities & voltage of each battery.

The voltage of each small battery is around 3.65V, which is very average, indicating that the battery is in good condition.

l DB Info
Make sure the power is turned off for more than 10s.
Turn the power ON.
We can see its dashboard software version here.

www.obd2shop.co.uk

Oznake: obdstar ms80

20.09.2022. u 08:06 • 0 Komentara • Print • # • ^

srijeda, 14.09.2022.

Solved Fetrotech Tool Crash & Taskbar Disappear Issue

This is a solution to fix Fetrotech Tool crash & taskbar disappear problem when running software. At present, the problem can only be solved by replacing to Windows 11 Pro 64bit system. Here we provide Win11 system installation free download.

1.Download Windows 11 Pro 64bit English system package, one-click backup & restore tool, system activation tool.

Win11 Pro 64bit English system package free download:
https://mega.nz/file/rIBRELxS#6Maa1nV-oRfUsEns38jWbc_Pu3MQufd2ygvABxk65Wc
Size: 5.18GB

One-click backup & restore tool free download:
https://mega.nz/file/GUBQSYSI#cueWd9pgIi6U7Nk9f8deH9qHAr4umTOSFsZ7e5wt4fU
Size: 30.7MB

Win11 system activation tool free download:
https://mega.nz/file/OFYRxBDD#iPAFckU6B3efqBn6OxKueLIxbCfU08Q5cYjQCgsbzxs
Size: 5.8MB

Note:
1)Please close all anti-virus software before reinstalling system. Otherwise, installation will fail.
2)Please backup all important files on the C drive before operation(C drive will be formatted after system is reinstalled).

2.Open One-click backup & restore tool >> Select one-key reinstall system >> Open Win11 64bit system package

3.Restart the computer to install system automatically.
* Plug in the computer, and do not operate during installation process. Wait about 10-25mins.

4.Activate Win11 system after installation.

5.Download & install Fetrotech ECU Programmer on www.tuner-box.com

6.Copy the ID & serial number of Fetrotech device according to prompt, send to seller for activation.

7.Move the 2 activation files to corresponding directory.

8.Connect Fetrotech device to open software.
* If an error occurs, please reinstall the software.

Read also:
Fetrotech Tool Installation, Activation & Package Problem Solution

Technical support
www.obd2shop.co.uk

Oznake: Fetrotech Tool ecu programmer

14.09.2022. u 09:22 • 0 Komentara • Print • # • ^

petak, 09.09.2022.

How to use Autel EVDiag Box with MaxiSys Ultra

Autel EVDiag Box is compatible with the MaxiSys Ultra, MaxiSys Ultra ADAS, MaxiSys MS919, and MaxiSys MS909.
It can be connected to the MaxiFlash VCMI or MaxiFlash VCI using the same connection steps.
The following operations use the connection of EVDiag Box with a MaxiFlash VCMI as an example.

Step 1. Connect the main cable V2.0 to the vehicle data connector on the VCMI and tighten the thumb screws.

Step 2. Connect the cable's 16-pin adapter to the OBDII connector of the EVDiag Box.

Step 3. Power up the tablet. Ensure that the tablet battery is charged or that it is connected to the supplied DC power supply.

Step 4. Select from Bluetooth, Wi-Fi, or USB cable V2 to connect the tablet with the VCMI and establish a communication link.

Use only the USB cable connection when programming.

Step 5. Tap Battery Pack Test on the MaxiSys Job Menu. Follow the onscreen instructions to confirm the relevant technical certifications and complete preparation.

Step 6. Follow the onscreen instructions to select the test vehicle, including its make, area, model, capacity, etc.

Note: The required adapter or breakout leads may vary by vehicle.

Please make the correct connection according to your actual situation.

Step 7. Power up the EVDiag Box. Ensure the EVDiag Box is connected to the DC power supply. Tap the OK button on the tablet's connection Diagram screen to connect the tablet with the EVDiag Box and establish a communication link. The main menu screen will appear once the link has been established.

Step 8. Tap Battery Pack Information on the Main Menu screen.

The screen will display the data obtained from the battery pack, including the SOC, voltage, current, pack voltage delta, and temperature.

For more information on EVDiag Box, please refer to

https://www.obd2shop.co.uk/

Oznake: autel evdiag box

09.09.2022. u 05:28 • 0 Komentara • Print • # • ^

srijeda, 07.09.2022.

Tesla Model 3 Airbag Reset with OBDSTAR P50 on Bench

It's a cost-effective way to do airbag reset for vehicles with OBDSTAR P50. Following I'm gonna reset Tesla Model 3 airbag on bench as an example.

Check full operations on Youtube:
https://www.youtube.com/watch?v=twB9eohT1rY

Tools Required
OBDSTAR P50
Main cable
P004 adapter
P004 jumper
Tesla Model 3 Airbag ECU

Tip: Please keep OBDSTAR P50 in charging & communication in the whole process.

Airbag reset >> All >> Airbag reset latest version >> Auto search part number

This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".

Please input the part number(Can be checked on ECU's label).
* Case insensitive, support fuzzy search.

Please refer to Diagram at bottom left to connect cables:
1.Connect P50 with main cable.
2.Connect P004 adapter with main cable & airbag ECU via jumper.
3.Turn on power button of P004 adapter & 120© resistance.

Press "Read DTC".
There's a crash fault code: crash event storage full and lock.
Erase Crash >> Enter
Erase crash success.

Go back to read DTC again.
Crash fault code has gone!
Airbag reset done.

More model tests with OBDSTAR P50 Airbag Reset Tool to be continued...
www.obd2shop.co.uk

Oznake: obdstar p50

07.09.2022. u 02:40 • 0 Komentara • Print • # • ^

ponedjeljak, 05.09.2022.

Yanhua Mini ACDP Module 27: Read/Write BMW DEM ISN & Clone

Yanhua Mini ACDP Module 27 is supported to read/write ISN & clone BMW E/F chassis MSV80, MSD80, MSD81, MSD85, MSD87, MSV90 DME. Must work with Mini ACDP basic module on a smart phone. Compatible with Android & iOS system.

Features
1.Fast reading/writing ISN & clone DME on bench without having to open the shell or program DME.
2.Special interface board is more convenient than wire connection, easier and safer, more efficient and reliable.

Support DME type: Continental, SIEMENS

Mini ACDP APP Operation Steps
Step1. Connect
Step2. Read/write data
Step3. Disconnect

Yanhua ACDP BMW allows to backup & write data, read & write MAPS, INT/EXT EEPROM, modify ISN data.

How to connect Module 27?
1.Prepare ACDP, OBP+ICP adapter, interface board & BMW DME.
2.Connect the interface board correctly to the DME interface as shown.
3.Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join".
4.Connect all together.

BMW MSV80

BMW MSD80/MSD81

BMW MSD85/MSD87

BMW MSV90

www.obd2shop.co.uk

Oznake: yanhua mini acdp

05.09.2022. u 09:10 • 0 Komentara • Print • # • ^

četvrtak, 01.09.2022.

How to perform authorization of the Yanhua Mini ACDP module

This article will guide you on how to authorize the Yanhua Mini ACDP module automatically.

Here are the steps:

The new module has an authorization code sticker on the outside.
Please peel off the green protective film.
If the authorization code is covered with residual gel, remove it with an eraser.
Make sure the QR code is clearly visible.

Open the ACDP APP and check that the ACDP device is connected correctly.

Click "Me" in the lower right corner and choose "Module List".

Click "Add" in the lower left corner, then click "Scan QR Code" to continue.

The authorization card number will be filled in automatically.

You can also manually enter the authorization card number.
Please note that letters must be capitalized.

Check the authorization card number, make sure it is correct and click "Submit".

The authorization is successful!