obd2shop

srijeda, 28.05.2025.

Fixed: VNCI 6154A VAG Software & Firmware Upgrade Failed Issue

If you're encountering an "Upgrade failed" error while trying to update your VNCI 6154A VAG Diagnostic Tool, you're not alone. This common issue can be frustrating, but the solution is often simple. Below, we explain why the problem occurs and how to fix it.

Why Does the VNCI 6154A Upgrade Fail?
The upgrade process may fail due to:
l Unstable internet connection (interrupting the download).
l Interference from vehicle connections (if the tool is plugged into a car during the update).

How to Fix the Upgrade Error?
1. Try Different Networks
A weak or unstable connection can disrupt the firmware download. Switch between:
l Wi-Fi (try a stronger signal).
l Mobile hotspot (if your primary network is slow).
l Wired Ethernet (for the most stable connection).

2. Disconnect from the Vehicle
Do not connect the VNCI 6154A to a car during the update. Instead:
l Plug only into your computer via USB.
l Ensure no OBD2 cables are attached.

Additional Tips
l Restart your computer before retrying.
l Run the update tool as Administrator (right-click ’ "Run as admin").
l Check for driver updates if the device isn’t detected.

Where to Get the VNCI 6154A Tool?
Purchase the official VNCI 6154A VAG Diagnostic Tool from trusted suppliers like OBD2Shop.

Final Thoughts
Most upgrade failures are due to network issues or incorrect connections. Follow these steps, and your VNCI 6154A should update successfully. If problems persist, contact the seller for firmware support.

Need more help? Visit www.obd2shop.co.uk for troubleshooting guides and tools.

Oznake: vnci 6154a vag

28.05.2025. u 10:07 • 0 Komentara • Print • # • ^

utorak, 27.05.2025.

OBDSTAR X300 Classic G3 Porsche Cayenne Battery Programming Guide

Battery replacement or upgrade in modern vehicles like the Porsche Cayenne requires proper coding to ensure accurate battery management. This guide walks you through using the battery programming function of OBDSTAR X300 Classic G3 for Porsche Cayenne models from 2018 to 2023.

Function Overview
The Battery Programming feature allows users to:
Modify battery parameters
Register battery capacity and serial number
Use one-click automatic code setting to update ECU data

Note: Ensure your diagnostic software is updated to the latest version before proceeding.

Step-by-Step Instructions
1. Access the ECU Advanced Menu
Open the [ECU Advanced] module.
Navigate to [Porsche] >> [Porsche V30.00] >> [Battery] >> [Cayenne 2018-2023].

2. Review the Guide Section
Open the [Guide] tab to read background information and menu descriptions.

3. Check ECU Information
Select [ECU Info.] to verify the current battery and control module data.

4. Enter Battery Programming Mode
Open the [Program Battery] function to access the parameter modification page.

5. Modify Battery Parameters
Adjust the battery capacity and serial number as needed.
Double-check all entries for accuracy to avoid errors.

6. Finalize Changes
Tap [OK] to confirm and execute the programming process.

Important Notes
1. Incorrect parameter entries may cause system malfunctions. Always validate data before confirming.
2. This function requires a stable OBD-II connection to the vehicle’s diagnostic port.

For tool compatibility or technical support, visit:
www.obd2shop.co.uk

Oznake: obdstar x300 classic g3

27.05.2025. u 09:53 • 0 Komentara • Print • # • ^

ponedjeljak, 26.05.2025.

VAPON VP100: Free BMW Keys & Cables - Limited Offer!

Limited promotion! Buy VAPON VP100 now to get FREE 2pcs Original BMW G Chassis Series Keys & BDC2/BDC3 Connecting Cables. Save up to $250, only 100 sets available. Start snapping up right now.

The VAPON VP100 Key Programmer add a BMW G Chassis Series key process, only require one procedure to complete. Say goodby to complex steps and hello to one-step perfection!

Why Choose VPH00?
Fully Automatic - No more manual toggling or unplugging! The VPH00's streamlined process is faster, safer, and ultra-reliable.
Universal Compatibility - Works seamlessly with BDC2 and BDC3 modules, thanks to its high-quality connecting cable.
Coming Soon - Stay tuned for the ALK update, expanding capabilities even further!

Multilingual Support: The VP100 tool (and VPH00) caters to a global audience with English, Spanish, Portuguese, Italian, and French interfaces.

Learn More & Buy Now: Visit www.obd2shop.co.uk for the latest updates and exclusive offers!

Upgrade your toolkit with VAPON - where innovation meets efficiency!

Read also
VAPON VP100: No Tokens, Free BMW Key Programming(2015-2021)
http://blog.obd2shop.co.uk/vapon-vp100-no-tokens-free-bmw-key-programming2015-2021/

Oznake: vapon vp100

26.05.2025. u 05:20 • 0 Komentara • Print • # • ^

četvrtak, 22.05.2025.

VVDI Key Tool Plus Adds 2020 Camry Smart Key via OBD

The Xhorse VVDI Key Tool Plus has successfully added functionality for programming smart keys on the 2020 Toyota Camry via the OBD-II port. Here is a detailed procedure using an original key as a reference.

Step-by-Step Programming Guide:

1. Navigate through the menu: Key programming >> ASIA >> Toyota. Select the model: Camry >> Keyless Go >> 2019- >> Type 1 (8A - Page P4 A8/A9/AA) >> Start programming >> Add smart keys.

2. The tool will display a prompt regarding EEPROM data. If you backed up the data via OBD, ignore it. If you just used adapter-backed data, restore the vehicle first. Press Yes.

3. An internet connection is required. The function allows the use of a registered original or emergency start key to add a new one. Press OK.

4. Turn the ignition to the ON position (instrument panel lights on). The Key Tool Plus will display the software number. Press OK.

5. The screen will show the current number of registered keys and the number of keys that can still be registered (e.g., Registered: 2, Remaining: 5). Note that the maximum key count may be inaccurate for some models. Press OK.

6. Crucial Step: Within 30 seconds of pressing OK, continuously touch the ignition switch with the sign surface of a registered key.

7. Immediately after, within 30 seconds, touch the ignition switch with the sign surface of the new key to be registered.
Note: One beep means you should move the key farther away. Two beeps indicate successful programming. Press OK.

8. Keep the key touching the ignition switch and wait for the registration to complete. A "Key registration succeeded!" message will appear, updating the key counts (e.g., Registered: 3, Remaining: 4).

Important Note: After programming is complete, if the key remote control does not function, use the [Synchronize ECU and ID] function in the tool (multiple attempts may be needed) to sync the remote code.

www.obd2shop.co.uk

Oznake: vvdi key tool plus

22.05.2025. u 02:51 • 0 Komentara • Print • # • ^

srijeda, 21.05.2025.

LAUNCH X431 PAD 5 Perform 2017 Mercedes GLS Level Calibration

This is a tutorial on how to perform 2017 Mercedes-Benz GLS Level Calibration with LAUNCH X431 PAD V Elite. The vehicle has just replaced the level sensor and has two DTCs as follows:

U042700 - Impossible data were received from the electronic ignition lock.
C156E00 - Calibration of the vehicle level was not performed.

How to do Mercedes-Benz GLS Level Calibration?
1. Choose [Special Function] of the air suspension system on X431 PAD V Elite, then choose [Teach-in Processes] >> [Level Calibration].

. Turn on the ignition switch and choose OK.

3. The values are not within the standard value range. Wait for the vehicle to adjust within the standard value range automatically. Click [Continue] >> [F3].

4. If there is no measuring tool, select the middle value to enter the left front incline angle, right front incline, left rear incline angle, and right rear incline angle. Click OK.
After confirming that the values are correct, click [Continue] >> [OK] to exit.

5. After successful calibration, click OK.

www.obd2shop.co.uk

Oznake: launch x431 pad v 5

21.05.2025. u 12:06 • 0 Komentara • Print • # • ^

petak, 16.05.2025.

2019 Audi Q7 Key Data Collection with Xhorse MLB Tool

In this guide, we’ll demonstrate how to collect key data from a 2019 Audi Q7 using the Xhorse MLB Tool together with the VVDI Key Tool Plus.
Please note that this process requires an online connection and will deduct 200 remote points for data calculation.

Required Tools:
Xhorse MLB Tool
VVDI Key Tool Plus
Acquisition cable
Stable internet connection
Original Audi Q7 key

Step 1: Enter Immobilizer Programming
On the VVDI Key Tool Plus, follow the path below:

Immo Programming
’ Audi
’ Select by Type
’ MLB Immobilizer Systems
’ Start Programming

This function requires a network connection.
Please ensure the device is properly connected to the internet, then tap OK to continue.

Step 2: Connect the MLB Tool
Select the connection diagram:
Connection Diagram ’ Type 2 (Audi / Lamborghini)
1. Follow the wiring diagram carefully
2. Solder the circuit board as shown
3. Connect the circuit board to the Xhorse MLB Tool
Once completed, tap “Collect Key Data” on the screen.

Step 3: Confirm Data Collection & Point Deduction

A prompt may appear:
“Detected that the Key Tool Plus does not read the vehicle information data. Continue to acquire data to save, and the immo file will not contain vehicle information. Whether to continue?”

Select:
Yes ’ Collect Original Keys – Points Deduction

Another confirmation will follow:
“This calculation will deduct 200 remote points. Do you want to continue?”
Select Yes to proceed.

Step 4: Key Data Acquisition
Before pressing OK, pay close attention to the following points:

Important Notes:
1. Connect the acquisition cable to the device exactly according to the wiring diagram.
2. Place the key flat on the sensing area of the device.
3. Ensure the TOP side of the acquisition cable faces upward.
4. Align VCC1 with VCC1 and VCC2 with VCC2 correctly.
Once everything is confirmed, press OK to start data acquisition.

Conclusion:
By using the Xhorse MLB Tool in combination with the VVDI Key Tool Plus, collecting key data for a 2019 Audi Q7 MLB system can be completed efficiently and safely. As long as the wiring, key placement, and network connection are correct, the process is straightforward—even though it requires a 200 remote point deduction.

For more automotive key programming tools and guides, visit:
www.obd2shop.co.uk

Oznake: xhorse mlb tool

16.05.2025. u 07:14 • 0 Komentara • Print • # • ^

četvrtak, 15.05.2025.

Xhorse MLB Tool Solder-free Adapter Wiring Diagram Guide

Xhorse MLB Tool is a professional solution designed to assist with key adding and programming for Audi, Porsche, Volkswagen, Lamborghini, Bentley, and other MLB platform vehicles. This tool has already helped technicians simplify complex key programming tasks and improve overall efficiency.

Now, with the launch of the Xhorse MLB Tool Solder-Free Adapter Kit, the workflow becomes even easier, safer, and more convenient.

What’s New with the MLB Solder-Free Adapter Kit?

The MLB Solder-Free Adapter Kit is designed to work seamlessly with the XHORSE MLB Tool, significantly reducing the need for traditional soldering during operation. By combining these two tools, technicians can:
1. Minimize the risk of PCB damage
2. Improve operational safety
3. Save time during installation and removal
4. Achieve a cleaner and more reliable working process

Important Note:
Although the adapter is solder-free, the removal of two capacitors is still required during the operation. Please follow the wiring diagrams carefully to ensure correct installation.

MLB Solder-Free Adapter Types & Wiring Diagrams

The MLB Solder-Free Adapter Kit is available in five different types, each designed to support specific vehicle models and PCB layouts. Refer to the corresponding wiring diagram for your application.

Type 1

Type 2

Type 3

Type 4

Type 6

Each adapter type is precisely engineered to ensure stable connections and accurate data communication during key programming.

Conclusion
The Xhorse MLB Tool, when paired with the MLB Solder-Free Adapter Kit, delivers a more efficient, professional, and user-friendly solution for MLB vehicle key programming. This combination is ideal for locksmiths and automotive technicians looking to improve productivity while reducing operational risk.

For more product details and purchasing information, please visit:
www.obd2shop.co.uk

Oznake: xhorse mlb tool

15.05.2025. u 03:44 • 0 Komentara • Print • # • ^

srijeda, 14.05.2025.

Fixed: Xhorse Bluetooth Digital Smart Key Connection Error

If you're experiencing connection issues with your Xhorse XSBTK0EN Bluetooth Digital Smart Key, follow these steps to resolve the problem quickly and efficiently.

Step-By-Step Solution
1. Reset the Device
l Press and hold the power button for 20 seconds to perform a full reset.
l This clears any temporary glitches affecting Bluetooth connectivity.

2. Reconnect via Bluetooth
l On your iPhone or Android phone, go to Bluetooth settings.
l Select "Xhorse XSBTK0EN" from the available devices.
l Press "OK" to confirm the pairing.

3. Complete the Setup Process
l Choose "Learn current phone" in the app.
l Follow the prompts until the process is complete.
l Confirm by pressing "OK".

4. Verify GL Version
l Ensure the device displays the latest GL version.
l Go to Settings >> Update to check the version

www.obd2shop.co.uk

Oznake: xhorse smart key

14.05.2025. u 10:26 • 0 Komentara • Print • # • ^

petak, 09.05.2025.

Troubleshooting KTP Connection Issue with MLB Tool

Issue Description (Reported by UK Customer):
"Hi, I am having problems communicating KTP with the MLB Tool. It won’t connect. I tried exiting and reconnecting, but the issue remains."

Root Cause & Solution
This issue typically occurs after performing the hardware upgrade for MQB key data reading.

When replacing the original chip inside the MLB Tool with the one provided in the MQB adapter package, it is crucial to ensure proper soldering of the new chip.

Important:
The chip must be securely soldered onto the board, with plenty of solder applied to all legs/pins to ensure stable connectivity and function.

Poor soldering can lead to unstable contact, causing the KTP connection to fail or remain unrecognized by the MLB Tool.

Recommendation:
Open the MLB Tool and double-check the solder joints of the new chip.
If necessary, resolder all legs carefully to ensure a solid connection.
Once done correctly, the KTP communication should work as expected.

www.obd2shop.co.uk

Oznake: xhorse mlb tool

09.05.2025. u 04:35 • 0 Komentara • Print • # • ^

četvrtak, 08.05.2025.

Xhorse Multi-PROG EEPROM Read/Write Operation Manual

This article introduces how to use the Xhorse Multi-PROG Programmer to read and write EEPROM data. Please read carefully if you are using the device for the first time.

What Is EEPROM?

EEPROM (Electrically Erasable Programmable Read-Only Memory) is a memory chip used to store electronic data in vehicles. Its storage capacity ranges from a few hundred bytes to several hundred megabytes and is widely used in automotive electronic modules.

The Xhorse Multi-PROG supports multiple interface connection methods, enabling users to efficiently read and write a wide range of EEPROM chips.

Entering the EEPROM Function Menu

Run the Multi-PROG software on your PC and enter the EEPROM memory function menu. You can select the corresponding EEPROM options based on the manufacturer and specific chip model.

Currently, the device supports almost all common EEPROM types used in automotive electronic modules. It supports both serial and parallel EEPROM interfaces (note: some parallel EEPROMs require special adapters).

EEPROM Model & Mask Query

After selecting a specific EEPROM manufacturer, the Multi-PROG software will display all supported EEPROM models under that brand.

In addition to browsing by manufacturer, you can also search directly by entering the EEPROM chip model or silk-screen mask in the search box.

For example, if you enter the silk-screen mask “5BBD” of an 8-pin EEPROM, the software will automatically match and display the corresponding chip model 95320.

EEPROM Read / Write / Check Operations

For EEPROM operations, the Multi-PROG provides the following functions:
Read
Erase
Write
Check

You can click the corresponding buttons directly in the software interface to perform each operation.

Important notes:

All data on the chip will be lost after clicking Erase

When clicking Write, the original data on the chip will be automatically erased before writing new data

Conclusion

With its wide EEPROM compatibility and intuitive software interface, the Xhorse Multi-PROG Programmer offers a reliable solution for EEPROM read and write operations in automotive electronics.

For more automotive programming tools and technical guides, visit:
www.obd2shop.co.uk

Oznake: xhorse multi prog

08.05.2025. u 02:21 • 0 Komentara • Print • # • ^

srijeda, 07.05.2025.

OBDSTAR Airbag Reset Update: Full Part Number Compatibility List [2025.04]

Need to reset airbag modules fast? OBDSTAR’s 2025 update just dropped with 240+ new part numbers! Covering Honda, Toyota, Ford, and more, this major upgrade expands crash data reset and DTC erasure for OBDSTAR X300 Classic G3 and P50 tools. Check the full list now – your next repair just got easier!

Newly Supported Part Numbers for Airbag Reset Version: V31.27

Total Added: 240 part numbers (14100+ part numbers supported).

Highlights:

– 150 part numbers were added for airbag reset across multiple brands.

List of Supported Models & Part Numbers

BENZ

– A1179001700-A1179011700 (BOSCH 95256)

– A2139019613 (CONTINENTAL SPC560P50)

– A6364460042 (BOSCH 95320)

CHERY

– 407000181AA (CONTINENTAL R7F701009)

– 407000349AA (CONTINENTAL R7F701009)

CHEVROLET

– 13507221 (PARTIALLY, GM)

– 13518028 (PARTIALLY, GM)

– 13526700 (PARTIALLY, GM)

– 13590217 (PARTIALLY, GM)

– 24324484 (GM R7F701008)

CHRYSLER

– 68316753AB (BOSCH 95128)

CITROEN

– 9673654780/609974000 (AUTOLIV 95320)

– 9825271962 (CONTINENTAL SPC560P50)

DACIA

– 285559753R (CONTINENTAL R7F701013)

DODGE

– 68085881AF (BOSCH 95256)

– 68303636AA (BOSCH 95256)

– 68517037AA (BOSCH 95128)

FIAT

– 00521826310 (CONTINENTAL R7F701018)

– 52204022 (MOPAR CONTI TC23XX-32F)

FORD

– AG13-14B321-BB (XC2361A)

– BC3T-14B321-NA (XC2361A)

– KS7T-14B321-PC (BOSCH R7F701A033)

GEELY

– 8893218588 (VEONEER TC222S-16F)

– 8894301793 (VEONEER TC222S-16F)

– 01304897/634867200 (AUTOLIV XC2336A-72F)

– 06302119/641604300 (BETA, BOSCH 95320)

HONDA

– 77960-3NO-G130-M1 (ZF TC23XX-32F)

– 77960-T50-N740-M1 (TC23XX-32F)

– 77960-T60-Q830-M1 (TC23XX-32F)

– 77960-T64-A920-M1 (TC23XX-32F)

– 77960-3V5-Q720-M1 (DENSO R7F701686)

– 77960-3Y1-E730-M1 (DENSO R7F701686)

– 77960-T9A-Q810-M1 (TRW 95640)

– 77960-T3L-X012-M1 (TRW 95640)

– 77960-T3L-YO21-M1 (TRW 95640)

– 77960-31X-J920-M2 (DENSO TC23XX-32F)

– 77960-3C1-P220-M2 (ZF TC23XX-32F)

– 77960-3A0-2220-M2 (ZF R7F701686)

– 77960-33H-J220-M2 (DENSO R7F701760)

– 77960-TGZ-A110-M2 (R7F701686)

– 77960-TM8-Q810-M2 (PARTIALLY, DENSO H8SX)

– 77960-SYY-J050-M3 (PARTIALLY, KEIHIN 93C86)

– 77960-TFO-Q813-M3 (PARTIALLY, KEIHIN MPC5604)

– 77960-T2M-W010-M4 (SPC560P50)

– 77960-TEG-J320-M4 (SPC56AP54)

– 77960-TV9-X010-M4 (CONTINENTAL SPC56AP54)

– 77960-S9V-X512-C1 (PARTIALLY, 95320)

– 77960-SFY-J112-M1 (PARTIALLY, TRW 95320)

– 77960-TS2-P411-M1 (PARTIALLY, TRW 95320)

– 77960-SWA-F230-M4 (PARTIALLY, SIEMENS 95640)

– 77960-SZA-X710-M1 (PARTIALLY, DENSO H8SX)

– 77960-T6A-J220-M2 (DENSO H8SX1725)

HYUNDAI

– 95910-3Z000 (MOBIS 95128)

– 95910-C1060 (MOBIS 95256)

– 95910-DB400 (MOBIS 95256)

– 95910-G3000-V2 (BOSCH 95256)

– 95910-G3101-V2 (BOSCH 95256)

– 95910-G4100-V2 (BOSCH 95256)

– 95910-AT210 (MOBIS 95512)

– 95910-L2700 (MOBIS 95512)

– 95910-L2AA0 (MOBIS 95512)

– 95910-L8500 (MOBIS 95512)

– 95910-K5200 (CONTINENTAL R7F7015803)

– 95910-EV200 (TC22XX-16F)

– 95910-CV210 (VEONEER TC23XX-16F)

– 95910-GI310 (VEONEER TC23XX-16F)

– 95910-GI500 (VEONEER TC23XX-16F)

– 95910-DO500 (VEONEER TC23XX-16F)

– 95910-DS250 (VEONEER TC23XX-16F)

– 95910-L1900 (VEONEER TC22XX-16F)

– 95910-AR600 (VEONEER TC23XX-32F)

– 95910-G9560 (VEONEER TC23XX-32F)

– 95910-G9660 (VEONEER TC23XX-32F)

– 95910-P6200 (VEONEER TC23XX-32F)

– 95910-P7100 (VEONEER TC23XX-32F)

– 95910-R0510 (VEONEER TC23XX-32F)

– 95910-L1750 (AUTOLIV TC23XX-32F)

INFINITI

– 98820-5CBOA (BOSCH 95128)

– 98820-5VG1D (VEONEER TC22XX-16F)

JEEP

– 68526685AA (MOPAR CONT. 95512)

– 68588639AB (MOPAR BOSCH R7F701330A)

KIA

– 95910-BU600 (MOBIS 95512)

– 95910-G6540 (MOBIS 95512)

– 95910-G6580 (MOBIS 95512)

– 95910-K0750 (MOBIS 95512)

– 95910-CC350 (CONTINENTAL R7F701042)

– 95910-N7530 (CONTINENTAL R7F7015803)

– 95910-N9550 (CONTINENTAL R7F7015803)

– 95910-P0320 (CONTINENTAL R7F7015803)

– 95910-P1650 (CONTINENTAL R7F7015803)

– 95910-Q5400 (CONTINENTAL R7F701019)

LEXUS

– 89170-0A081 (PARTIALLY, DENSO R7F701A223)

– 89170-33P50 (PARTIALLY, DENSO R7F701A223)

– 89170-33S50 (PARTIALLY, DENSO R7F701A223)

– 89170-76590 (PARTIALLY, DENSO R7F701A223)

MAZDA

– K123-57K30-C (BOSCH 95128)

MG

– 11352919-01 (TRW TC22XX-16F)

– 11411617-01 (TRW TC22XX-16F)

– 11435525-00 (TRW TC22XX-16F)

– 11489470-01 (TRW TC22XX-16F)

– 11495981-01 (TRW TC22XX-16F)

– 11811911-01 (TRW TC22XX-16F)

MITSUBISHI

– 8635A216 (BOSCH 95640)

– 8635A346 (BOSCH 95640)

– 98820-A014P (VEONEER TC22XX-16F)

– 98820-W011P (VEONEER TC22XX-16F)

NISSAN

– 98820-1A60C (VEONEER TC22XX-16F)

– 98820-5MROE (VEONEER TC22XX-16F)

– 98820-5MX0B (VEONEER TC22XX-16F)

– 98820-6UU2A (VEONEER TC22XX-16F)

– 98820-9PV2A (VEONEER TC22XX-16F)

– 98820-6UY2A (VEONEER TC32XX-24F)

– 98820-7DA1D (CONTINENTAL TC23XX-32F)

– 98820-6MNOA (AUTOLIV XC2336B)

RENAULT

– 285550749R (CONTINENTAL R7F701042X)

– 285556057R (VEONEER TC22XX-16F)

– 285557272R (BOSCH 95128)

– 8201002829 (CONTINENTAL 95160)

ROEWE

– 11536289-01 (TRW TC224L-16F)

– 11694965-01 (TRW TC224L-16F)

– 11694968-01 (TRW TC224L-16F)

SGMW

– 23756591 (BOSCH R7F701A033)

SSANGYONG

– 86250-35153 (CONTINENTAL R7F701042X)

– 86251-38040 (CONTINENTAL R7F701042X)

– 86250-36271 (CONTINENTAL SPC560P50)

SUBARU

– 98221AL01B (BOSCH 95128)

– 98221FJ250 (H8SX1725)

SUZUKI

– 38910-55L20 (CONTINENTAL 95640)

– 3F900-53U00 (DENSO R7F701686)

– 3F900-62U00 (DENSO R7F701686)

TOYOTA

– 89170-10200 (PARTIALLY, DENSO R7F701A223)

– 89170-02T40 (DENSO R7F7016443)

– 89170-0E600 (DENSO R7F7016443)

– 89170-0E630 (DENSO R7F7016443)

– 89170-12N00 (DENSO R7F7016843)

– 89170-12N10 (DENSO R7F7016843)

– 89170-30F10 (DENSO R7F7016443)

– 89170-33Y00 (DENSO R7F7016443)

– 89170-42C60 (DENSO R7F7016843)

– 89170-50N30 (DENSO R7F7016443)

– 89170-60P40 (DENSO R7F7016443)

– 89170-76830 (DENSO R7F7016443)

– 89170-78130 (DENSO R7F7016843)

– 89170-26820 (H8SX1725)

– 89170-60511 (H8SX1725)

– 89170-30D60 (H8SX1797)

– 89170-30G00 (H8SX1797)

– 89170-30G60 (H8SX1797)

– 89170-60J30 (H8SX1797)

VW

– 3QD959655BG (TRW MPC5604P)

Newly Supported Part Numbers for Read/Erase DTC (Diagnostic Trouble Code)

Total Added: 90 part numbers.

List of Supported Models & Part Numbers (DIAG ONLY unless noted)

CHERY

– 407000497AA (VEONEER TC23XX-32F)

– 407000691AA (VEONEER TC23XX-32F)

– 407000568AA (MOBIS 95512)

– 629328500-J60-3658010BB (AUTOLIV XC2336B-40F)

– 680403700-407000138AA (AUTOLIV XC2336B-40F)

CHEVROLET

– 13538611 (GM TC23XX-24F)

– 13552053 (GM TC23XX-24F)

– 13552060 (GM TC23XX-24F)

– 13552069 (GM TC23XX-24F)

DAIHATSU

– 89170-B1130 (DENSO 93C56)

– 89170-B2040 (DENSO 93C56)

– 89170-B2260 (DENSO 93C56)

– 89170-B2280 (DENSO 93C56)

– 89170-B2A30 (DENSO 93C56)

– 89170-B4030 (DENSO 93C56)

– 89170-B4080 (DENSO 93C56)

– 89170-B2860/0285012585 (BOSCH 95640)

– 89170-B5090/0285012587 (BOSCH 95640)

DODGE

– 56038963AF (DIAG + READ/WRITE, BOSCH 95256)

FIAT

– 00046865029 (MOPAR ZF TC23XX-32F)

– 00052219048 (MOPAR ZF TC23XX-32F)

– 00052226966 (MOPAR ZF TC23XX-32F)

– 00052228171 (MOPAR ZF TC23XX-32F)

– 00051951646 (MOPAR TRW 95640)

– 51916488/229289-102 (TRW 95640)

FORD

– 5F23-14B321-AC (TAKATA 95320)

– 6F23-14B321-AB (TAKATA 95320)

– 9G613-14B321-AB (SIEMENS 95640)

– PB3T-14B321-CB (FOMOCO TC23XX-24F)

– RB5T-14B321-AB (FOMOCO TC23XX-24F)

– RL3T-14B321-BA (FOMOCO TC23XX-24F)

– RL3T-14B321-YB (FOMOCO TC23XX-24F)

HYUNDAI

– 95910-0X150 (MOBIS 95640)

– 95910-0X500 (MOBIS 95640)

– 95910-0X700 (MOBIS 95640)

JEEP

– 04896901AE/0285010042 (BOSCH 95320)

– 68476781AC (MOPAR TC23XX-32F)

– 68476789AB (MOPAR TC23XX-32F)

– P56054178AA (CHRYSLER 95640)

– P68069502AD (CHRYSLER 95256)

– P68210607AF (CHRYSLER 95256)

– P68210608AE (CHRYSLER 95256)

– P68293701AA (CHRYSLER 95256)

MAZDA

– BJDV-57K30 (TC33XX-32F)

– G33D-57K30 (SIEMENS 95640)

MITSUBISHI

– P8635A030-DDPP (95640)

– P8635A204-DDPPSC (95640)

NISSAN

– 98820-6LY6A (BOSCH 95128)

– 98820-6PFOA (BOSCH 95128)

– 98820-6YPOA (BOSCH 95128)

PORSCHE

– 97061820106/218737-109 (TRW 95640)

– 97061820124/218737-112 (TRW 95640)

– 99161820104/218737-118 (TRW 95640)

– 99161820109/218737-125 (TRW 95640)

– 99761821704 (95320)

– 99761821706 (95320)

– 99761821909 (95320)

RENAULT

– 8200272534/602869100 (AUTOLIV 95160)

– 8200912447/608361500 (AUTOLIV 95160)

SEAT

– 56D959655C (DIAG + READ/WRITE, BOSCH 95320)

– 56D959655D (DIAG + READ/WRITE, BOSCH 95320)

– 5QF959655BG-VW23 (TRW TC33XX-32F)

– 5QF959655BK-VW23 (TRW TC33XX-32F)

SUBARU

– 98221CC100 (DENSO R7F7016863)

– 98221SL000 (DENSO R7F7016863)

– 98221VC020 (DENSO R7F7016863)

– 98221FL290 (H8SX1726)

TOYOTA

– 89170-02E20 (TRW 95160)

– 89170-02E50 (TRW 95160)

– 89170-02F30 (TRW 95160)

– 89170-0H140 (TRW 95160)

– 89170-0H160 (TRW 95160)

– 89170-42240 (DENSO 93C66)

– 89170-60350 (FUJITSU 93C66)

– 89170-60A00 (FUJITSU 93056)

– 89170-06C60 (DENSO CYT2B93BAC)

– 89170-0E700 (BOSCH R7F701330A)

– 89170-60J60 (BOSCH R7F701330A)

– 89170-60K00 (BOSCH R7F701330A)

– 89170-60K40 (BOSCH R7F701330A)

– 89170-78360 (DENSO R7F7016843)

– 89170-B1390 (DENSO R7F701A313)

– 89170-BZ800 (DENSO R7F701A313)

– 89170-BZ840 (DENSO R7F701A383)

TRUMPCHI

– 8040003ADE0100-V2 (BOSCH R7F7010643)

VW

– 1EA959655FA-VW40 (TC23XX-32F)

– 1EA959655H-VW40 (TC23XX-32F)

– 3WA959655P-VW50 (TC23XX-32F)

– 5QS959655D-VW50 (TC36XX-64F)

XPENG

– 6590001FA1 (BOSCH R7F7010643)

KeyMaster G3 Support RH850 MP001 Read/Write Part Numbers

FORD

– KS7T-14B321-PC (BOSCH R7F701A033)

SGMW

– 23756591 (BOSCH R7F701A033)

SUBARU

– 98221CC100 (DENSO R7F7016863)

– 98221SL000 (DENSO R7F7016863)

– 98221VC020 (DENSO R7F7016863)

TOYOTA

– 89170-02T40 (DENSO R7F7016443)

– 89170-0E600 (DENSO R7F7016443)

– 89170-0E630 (DENSO R7F7016443)

– 89170-12N00 (DENSO R7F7016843)

– 89170-12N10 (DENSO R7F7016843)

– 89170-30F10 (DENSO R7F7016443)

– 89170-33Y00 (DENSO R7F7016443)

– 89170-42C60 (DENSO R7F7016843)

– 89170-50N30 (DENSO R7F7016443)

– 89170-60P40 (DENSO R7F7016443)

– 89170-76830 (DENSO R7F7016443)

– 89170-78130 (DENSO R7F7016843)

– 89170-78360 (DENSO R7F7016843)

TRUMPCHI

– 8040003ADE0100-V2 (BOSCH R7F7010643)

XPENG

– 6590001FA1 (BOSCH R7F7010643)

BATTERY RESET Version: V30.23

– Added functions:[ECU Info.], [Erase DTC], [Erase Crash], [Relay ON]for PEUGEOT BMS.

Supported Tools

–OBDSTARKEYMASTER G3

–OBDSTARP50

www.obd2shop.co.uk

Oznake: obdstar tools

07.05.2025. u 11:55 • 0 Komentara • Print • # • ^

ponedjeljak, 05.05.2025.

Lonsdor K518 PRO Program 2024 BYD Qin L Smart Key OK

Here are the original car keys and a new key. We're using the Lonsdor K518 PRO to program the key adding for the 2024 BYD Qin L by OBD.

When programming car keys, all keys must be reprogrammed together. It doesn't matter if a key is old or new - any key that isn't reprogrammed will no longer work.

Immo & Remote >> BYD >> Smart Key >> Qin Series
Qin L is a new model launched in 2024. K518 PRO hasn't added it to the menu yet, so we'll select the "Qin Plus" option here.
Qin Plus >> 2023- >> Read Key Info
Put the original car key in the sensing area in the cup holder.
The number of programmed keys: 1

Program Smart Key >> OK
Keep the key in the sensing area.
Programming succeeds.
Press Yes to program the next one.
Take out the original key, and put the new key into the sensing area.
Program successfully.
The number of programmed keys: 2
Test the original key and the new key.
Both remote controls work normally and can start the car.

Done.