obd2shop

četvrtak, 31.08.2023.

How to use Autel MaxiIM IM608 II to add a key for 2011 VW GTI

This post will guide you on how to use the Autel MaxiIM IM608 PRO 2 key programmer to add a new key for the 2011 Volkswagen GTI.

The tools we need:

Autel IM608 Pro 2
Autel X400 PRO
A Volkswagen GTI working key
A new blank key

First, take the original key set it into the ignition, and turn the ignition on.

Then select IMMO on the IM608 Pro 2 tablet.

Select "Volkswagen" >> "Smart selection", confirm the vehicle information, and click "Yes" to continue.

After coming to the following interface, select "Add Key", then click "Yes" to continue.

Next are the three operations of "Add key".

1. Read IMMO data
2. Make dealer key
Do you want to generate a dealer key? Click "Yes".
Then place a blank key into the key slot of the programmer and press OK.
The dealer key was generated successfully.

3. Add keys to the vehicle
Place the dealer key into the key slot of the programmer
Entering programming mode. It may take a long time...
Key added successfully.

Then go back to the "Function selection" interface and select "Add remote control".

Press the unlock button on the door, then choose "OK" to continue.

Press any button of the key within 10s.
Remote control adding succeeded.

Let's test everything out, turn the ignition off, pull out the original key, and then insert the new key.
The car starts and runs with the new key!

Tech support: www.obd2shop.co.uk

Oznake: autel im608 ii

31.08.2023. u 11:49 • 0 Komentara • Print • # • ^

Lonsdor K518ISE Program 2020 Mazda 3 All Key Lost Free PIN

Lonsdor K518 series has supported all keys lost and added new keys with a free PIN code via OBD for Mazda's new models after 2019. Like Mazda 3, Mazda 6, XC-5, CX-9, XC30. Here's programming the 2020 Mazda 3 all keys lost with Lonsdor K518ISE as an example. We'll simulate the situation for this car.

Let's strap the K518 device to the steering wheel for convenience to operate.
Immo & remote >> Mazda >> China >> Axela >> 2020- >> All smart key lost
* This function requires a WiFi connection, please confirm WiFi is well connected.

Warning
Please use the specific key to the program. After the programming is complete, some aftermarket keys can start the car, but the dashboard's fault light will go on and the fault code can't be cleared.
Press "OK" to continue.
Note:
All smart keys will be deleted, at least 2 keys are required to complete programming.

If the vehicle alarm rings, please wait about 30s for the alarm to end.
Click "OK" to continue.
(For all key lost, this car will be in the alarm situation, you'll need to wait for 30s until the alarm to end. For the simulation, we don't need to wait for this time.)

All the smart keys must be kept 1m away from the car.

Press and hold the start button for 10s, and then press the start button once the button indicator turns from green to yellow.
If the vehicle alarm rings, please wait about 30s for the alarm to end.
Press "OK".
It takes 7 minutes to grant security access, and the buzzer will beep after 7 minutes...
(We can hear the horn rings, which means we have already got security access.)

Count of current smart keys: 2
Press "OK".
Delete all keys successfully.

Please switch the ignition off.
Note:
1. Turn ignition on.
2. When the start button's indicator light turns green(in 5s), hold the key's logo end near the button.

Current key count:1
Press "OK" to program the next key.
Repeat the operation as before...
Current key count: 3
Press "Cancel" to complete.

Before starting the car engine, you will need to complete the below operation steps:
For AT vehicles
1. Slam on the brake.
2. In turn to put each programmed key onto the car start button to start the engine for 3s, then turn the ignition off.

Test all 3 keys, lock and unlock OK, start car OK.
This is how to program the 2020 Mazda 3 with all keys lost with Lonsdor K518 by OBD successfully.

www.obd2shop.co.uk

Oznake: lonsdor k518ise

31.08.2023. u 11:42 • 0 Komentara • Print • # • ^

Lonsdor K518ISE Program 2020 Mazda 3 All Key Lost Free PIN

www.obd2shop.co.uk

Oznake: lonsdor k518ise

31.08.2023. u 08:50 • 0 Komentara • Print • # • ^

četvrtak, 17.08.2023.

Xhorse Dolphin XP-005 Cut KIA3R All Key Lost OK

Today I'm gonna show how to cut a KIA3R for KIA Sephia with all keys lost with Xhorse Dolphin XP-005 Key Cutting Machine. In the process, I'll need to use M5 Clamp, and make sure it is installed properly before cutting.

Next, I'll need to decode with the LISHI tool to get bitting code 21122311 and key code Y2263. Once we've got them all, we can start cutting keys.

Open the Xhorse app to remote control:
All key lost >> Kia >> Y2263 >> KIA3R

M5-A Clamp shoulder align.
This type recommends using 1.5mm to cut.

Cut key >> Cut
The Dolphin XP-005 machine will start cutting...
Just wait until completed.

Once Dolphin stopped, take out the key for a test.
It can smoothly open the door lock.
Done.

www.xhorse.co.uk

Oznake: dolphin xp005, m5 clamp

17.08.2023. u 09:02 • 0 Komentara • Print • # • ^

srijeda, 02.08.2023.

FoxFlash Master vs. Slave Version, What's Different?

FoxFlash has recently released a new Slave Version Tool, what's it used for? The original FoxFlash can now support managing and helping tuning files for slave tools. That's to say one FoxFlash master is allowed to manage multiple slave tools. Only to upgrade your existing FoxFlash to a Master.

Differences
1. Foxflash Slave Version is cheaper.
2. Both versions have the same functions, but the Slave needs to get authorization and help from the Master when tuning files.
3. FoxFlash Master is recommended for technicians with good tuning skills. On the contrary, it's not a necessary skill for Slave version users.
4. By purchasing the Master & Slave Manager Tool, the original FoxFlash can upgrade to Master to manage more slave tools.

Q: What's the Foxflash Slave tool?
With a slave tool, you can read and write encrypted files. These files can only be modified by a specific master. This master is a file provider designated when you buy the tool. Your slave tool is linked to this master.

Q: Does the Slave version has all of the FoxFlash function?
Yes, it has all of the FoxFlash function

Q: Who will need the Slave tool?
1:Anyone who cant develop his own tuning file, but needs some good tuners that can supply, so they will need it.
2: Anyone wants a lower price to get this tool.
3: Anyone master owner who wants to develop his own dealer tuning net in the world

Q: Can the Slave tool upgrade to Master?
Yes, you can upgrade it as a master. Any slave tool can be remotely transformed into a master tool if the following conditions are met:
1)Your master approves the switch (we need written approval from the current master to info@dfb-technology.com)
2)You pay the price difference

Q: Can the Slave tool work on ECU clones and repairs?
Yes, it can. The Slave tool can dump ecu flash and EEPROM. It also can upload back to ecu too.

Q: How it will work if I have a master tool, I want to develop my own slave users?
1. Contact your seller or the official to get the Master & Slave Manage Tool.
2. Order the Slave tool and sell it to your client.
3. Client uses his slave tool to read the file and send it to you, next you can use the Master & Slave Tool to decrypt the file and help them tune it, then encrypt it. After all is done, send the file back.

www.obd2shop.co.uk

Oznake: foxflash ecu programmer

02.08.2023. u 08:34 • 0 Komentara • Print • # • ^

utorak, 01.08.2023.

Connect Yanhua Mini ACDP-2 to Android/iOS/PC via USB cable

This is a tutorial on how to connect Yanhua Mini ACDP-2 to Android, iOS, and PC via a USB cable.

Before connecting, make sure that the ACDP-2 device is powered on by the power supply.

Part 1. Android connection mode

Use a Type-c cable to connect the ACDP-2 USB interface to the Android phone/pad's charging port.

Open ACDP APP (Android APP Download), click on the close button
Check the box and click "OK"
When the device ID is displayed in the upper right corner, this means the device has successfully connected.

Part 2. iOS connection mode

Use the Lightning cable to connect the ACDP-2 USB interface with iPhone/iPad's lightning port.

Open ACDP APP (Go to APP Store and search for "ACDP" to download)
When the device ID is displayed in the upper right corner, this means the device has successfully connected.

Part 3. PC connection mode

Use a USB cable to connect the ACDP-2 USB interface and PC USB interface.

Open PC-ACDP2 software (For download and installation of PC software, please refer to Yanhua Mini ACDP-2 PC Software Download Tutorial
Click the setting buttons in the upper left corner of the software
Click PC Bound to ACDP 2 device
Select your device ID
Click the back icon to return to the software home page
When the device ID is displayed in the upper right corner, this means the device has successfully connected.