OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

petak, 31.10.2025.

XirDecoder DTC & Chip Tuning Software Update v3.2 (28.10.2025)

The latest XirDecoder v3.2 update brings a major leap forward in functionality and performance for all users. The main panel has been completely upgraded — now allowing you to perform tuning operations directly from the homepage, in addition to full DTC management.



Why Use the Main Panel?
Complete MapPack Support – All MapPacks are now fully supported for each ECU, eliminating issues with missing or undefined tuning options.

Instant Stage Operations – No more support tickets for tuning adjustments. Apply Stage 1–2, DPF, EGR, and other functions instantly after uploading your file.

Unlocking MapPack Locks – We’ve started removing restrictions on Stage MapPacks, giving you more control and flexibility.

Continuous Expansion & Improvements
We are steadily working toward making all MapPacks 100% functional. New ECUs are added daily as we move closer to full tuning support for 438 ECUs.

If your file is fully original and you notice limited tuning options, rest assured—our system updates continuously. The enhancement process runs 24/7, and we expect all features to be fully available within the next 48 hours.

Tech support: www.obd2shop.co.uk

Oznake: XirDecoder DTC Chip Tuning

31.10.2025. u 07:17 • 0 Komentara • Print • # • ^

četvrtak, 30.10.2025.

Resetting SGMW R7F701A033 Airbag ECU with OBDSTAR P50

This article provides a step-by-step guide on how to reset the crash data for an SGMW R7F701A033 encrypted Airbag ECU using OBDSTAR P50. This procedure is necessary when standard diagnostic tools cannot clear crash-related fault codes.

Required Tools & Equipment
P50 or Keymaster G3
High-power DC regulated power supply
MP001 multi-function programmer
RH850/V850 adapter kit
Main cable and jumper
SGMW R7F701A033 airbag module



Pre-Operation Preparation
1. Software Upgrade: Ensure your diagnostic tool's software is updated to the latest version.
2. Navigation: From the main menu, select [Crash Reset] and then [AIRBAG RESET].
3. Model Selection: You can quickly locate the correct option by searching for the airbag ECU part number in the upper-right corner search bar.
4. Initial Setup: Select the correct Boot Mode and the corresponding RH850 adapter.






Critical Preliminary Step: Review the Guide
Before any physical work, carefully review the built-in instructions.
Tap the [Guide] button.
Thoroughly read all sections: Background, Menu Description, Operation Description, Notes, and Connection Method.

This information is crucial for a successful and safe reset.


Hardware Connection & Wiring
1. Click [Connector Pinout].
2. Important: This specific ECU has multiple wiring methods. You must follow the pinout diagram that matches the function you are performing.
3. Connect the wires from your programmer to the ECU's circuit board precisely as shown in the diagram.






Step-by-Step Reset Procedure
Phase 1: Initial Diagnostics & Preparation
1. ECU Information: Click [ECU Info] to read and verify the ECU's part number.
2. Check for DTCs: Select [Read DTC]. You will see a persistent crash-related fault code.
3. Attempt Erasure: Choose [Erase DTC]. This will fail, confirming the need for a physical reset.








Phase 2: Physical Access & Data Backup
1. Initiate Crash Erase: Select the [Erase Crash (MP001)] function.
2. Power Down: Tap [PCB Pinout] to view the diagram, then disconnect power to the ECU.
3. Disassemble: Remove the cover of the airbag ECU to access the main printed circuit board (PCB).
4. Adapter & Wiring: Replace the standard adapter with the RH850 adapter. Solder the wires to the ECU's PCB as shown in the diagram.
5. Read All Data: Tap [Read All Data (R7F701A033)] and then [START].
6. Connect Programmer: Connect the MP001 programmer to the diagnostic device. An "Upgrade successful" message will appear.
7. Acknowledge Risk: A warning will appear: "Continuing with the risk of locking the MCU, do you want to continue?" Proceed with caution.
8. Create Backup: The tool will read the ECU's memory. It is critical to save the backup file when prompted. Wait for the "Operation success" message.












Phase 3: Erasing the Crash Record
1. Execute Erase: Click the [Erase Crash] button.
2. Confirmation Prompt: The device will ask, "Has the [Read All Data] function been executed?" Since you have already done this, select OK.
3. Select Backup File: When prompted, select the data file you saved in the previous step.
4. Completion: The process will complete with a "Crash record erased successfully" message.






Phase 4: Final Verification
1. Reconnect: Reconnect the device to the vehicle and switch the software back to standard diagnostic mode.
2. Clear DTCs: Select [Erase DTC] again. The DTCs will now be erased successfully.
3. Final Check: Perform a final [Read DTC] to confirm. The previous crash record and all related fault codes will be gone.






Conclusion
You have now successfully used the OBDSTAR P50 to reset the collision data for the SGMW R7F701A033 airbag ECU. Always ensure a full backup is performed before attempting any write operations to prevent permanent ECU damage.

www.obd2shop.co.uk

For more details, please refer to the video:
https://youtu.be/I8-9uOmEH9M

Oznake: obdstar p50

30.10.2025. u 02:23 • 0 Komentara • Print • # • ^

srijeda, 29.10.2025.

Lonsdor K518 PRO Programs 2011 Land Rover Discovery 4 key

This guide explains how to program new smart keys for a 2011 Land Rover Discovery 4 when all keys are lost, using the Lonsdor K518 PRO.

Tools Required:
Lonsdor K518 Key Programmer
OBD communication cable
Lonsdor JLR Smart Key



Step-by-Step Procedure:
1. Connect the Tool:
Plug the OBD cable into the vehicle's OBD port and into the Lonsdor K518.


2. Generate Smart Key:
From the main menu, select "Generate Smart Key" ’ Land Rover ’ Land Rover 433 ID49.
Place the new smart key into the K518 PRO slot and select "Generate."
Wait for the "Generation Successful" message.




3. Program the Smart Key:
Return to the main menu and select
Immobilizer & Remote ’ Land Rover ’ Select from vehicle ’ Discovery 4 ’ Program Smart Key ’ All smart keys lost.
Turn on the hazard lights when prompted.




4. Follow On-Screen Instructions:
The tool may ask if you want to program additional keys. Confirm or cancel as needed.
Hold each key in your hand as instructed and follow all prompts carefully:
Please switch the ignition off.
Programming...Within 5s, press the smart key(to be added)' unlock button once.
Locking... Within 5s to click the unlock button of the smart key to be added once.




5. Complete the Process:
Once programming is complete, test each key:
Step on the brake and press the start button.
Verify that the engine starts.
Test the remote lock and unlock functions.


Result:
Both keys should start the vehicle and operate the remote functions normally.

This Lonsdor K518 PRO tutorial helps you successfully program all-new smart keys for the Land Rover Discovery 4 - even in a full key-loss situation.

www.obd2shop.co.uk

Oznake: lonsdor k518 pro

29.10.2025. u 08:04 • 0 Komentara • Print • # • ^

utorak, 28.10.2025.

How to Use Your Autel TCP Card for a Software Subscription

This guide will walk you through applying your Autel Total Care Program (TCP) card. By redeeming the card, you can extend your software updates and hardware warranty for an additional year—ensuring your diagnostic tool stays up to date with the latest features and remains protected.

You can activate your TCP card either through a web browser or directly on your Autel tablet. Follow the instructions below based on your preferred method.

1. Via Web Browser
` Go to pro.autel.com or autel.com and log in to your Autel account.
a From the left-hand menu, select “Redeem.”
b Choose the Author Device you wish to apply the TCP card to.
If you have multiple tools registered, double-check that you select the correct one by verifying the serial number.
c Peel off the label from the back of your TCP card to reveal the activation code, then enter it into the provided field.
d Click “OK” to confirm.
Your TCP card will now be activated.







2. Directly on Your Autel Tablet
` Open the Maxis App on your Autel tablet.
a Select the “Update” app.
b Tap the “Renew” button.
c Choose the “TCP Renewal” option in the top-right corner.
d If you have more than one device linked, select the correct one.
e Enter the activation code from your TCP card and tap “Submit.”
Your TCP card will now be activated.












Important Tips Before You Start
Make sure your tool is registered to your Autel account before attempting to apply a TCP card.
Use a stable Wi-Fi connection throughout the process to avoid interruptions.

Updating your tool’s coverage is quick and simple. With an Autel TCP card, you can continue to access the latest software enhancements and keep your hardware protected under warranty.

For more information about Autel’s full range of diagnostic and service tools, visit www.obd2shop.co.uk.

Oznake: Autel TCP Card

28.10.2025. u 08:23 • 0 Komentara • Print • # • ^

ponedjeljak, 27.10.2025.

Launch AIOBD Scanner: Full Car Diagnosis & AI Repair Advice

Built with the same professional-grade DNA as the renowned Launch X-431 series, the LAUNCH AIOBD OBD Scanner brings powerful, easy-to-use diagnostics right to your smartphone. Connect the Bluetooth hardware to your car, and run professional-level scans anytime, anywhere.



Key Features:
lFull Scan & OBD Report
Run a one-touch full vehicle scan. Generate comprehensive OBD reports covering 10 modes, plus Smog Check and OBFCM - all for free. Unlock detailed system faults and AI analysis with a subscription.
lAI-Powered Insights
Get professional diagnostic reports with AI analysis, predictive maintenance tips, repair time estimates, and part replacement suggestions.
lSave & Share Reports
Keep a history of all your diagnostic reports. Compare past issues, track the top 10 common faults for your model, and share reports with mechanics.
lUser-Friendly Design
No complicated menus - the app is clean, intuitive, and designed for everyday car owners.








How It Works:
1. Download the App
iOS: Search "LAUNCH AIOBD" on the App Store
Android: Find it on Google Play
Or scan the QR code on the package

2. Connect & Activate
The app automatically detects your LAUNCH AIOBD device. No manual setup.

3. Scan & Analyze
Run a free OBD scan or unlock full diagnostics with a subscription.


Affordable Subscription Plans:
lAccess full diagnostics for your vehicle model
lChoose from annual, quarterly, or monthly plans
lPrices start as low as $20 - $40 per year per vehicle
lDiscounts for returning customers

Why Choose LAUNCH AIOBD?
1. No expert knowledge required
2. Bluetooth connectivity - no cables
3. Free OBD reports & updates
4. AI-driven repair and maintenance advice
5. From the trusted makers of Launch X-431

Perfect For Car Owners Who Want:
 Quick fault code reading
 Deeper insight into car health
 Predictive maintenance alerts
 Professional reports without the shop price

Get Yours Today!
Download the LAUNCH AIOBD app and take control of your car's health.
LAUNCH AIOBD - Drive Smarter. Diagnose Better.

www.obd2shop.co.uk

27.10.2025. u 06:54 • 0 Komentara • Print • # • ^

petak, 24.10.2025.

OBDSTAR P005 Adapter Kit – For BMW BDC02 IMMO Function

The OBDSTAR P005 Adapter Kit is the latest professional accessory designed for IMMO functions on BMW BDC02 modules. It provides a fast, reliable, and solder-free solution for reading IMMO pincodes and virginizing used ECUs — making maintenance and repair easier than ever.

Package Includes:
P005 Custom Board
W012 Connecting Main Cable



Main Functions
1. Solder-free IMMO PIN Reading
Supports reading the IMMO pin code of BMW BDC02 via BOOT mode.
Ideal for adding new keys safely and efficiently.
2. Solder-free Virginizing of Used BMW BDC02 ECU
Supports virginizing operations through OBD/BOOT mode, allowing the used ECU to be re-adapted to another vehicle.

Notice:
OBD-mode virginizing requires a 32-bit security key.
If the key is unavailable, it can be retrieved through BOOT mode.

Supported BMW Models


Key Advantages
1. Fully solder-free operation — safe and easy to use
2. Works with both BOOT and OBD modes
3. Designed for professional BMW key programming and ECU repair
4. Compatible with OBDSTAR KeyMaster G3

Conclusion

The OBDSTAR P005 Adapter Kit streamlines IMMO and ECU work on BMW BDC02 systems, saving time while ensuring secure and stable performance. Whether for key programming or ECU replacement, it’s a must-have tool for professional automotive technicians.

www.obd2shop.co.uk

Oznake: obdstar p005 adapter

24.10.2025. u 11:42 • 0 Komentara • Print • # • ^

Read/Write Data and Program VIN for JINBEI TR40.3 ECM Using DC706

This post provides a practical demonstration of performing data read/write and VIN programming operations on the JINBEI TR40.3 Engine Control Module (ECM) using the OBDSTAR DC706 ECU tool.

Required Tools & Equipment:
DC706 or KEYMASTER G3 Tool
High-power DC Regulated Power Supply
Main Cable
ECU Clone Jumper
MP001 Programmer
JINBEI TR40.3 ECM



Step-by-Step Guide:

1. Software Preparation:
Ensure your diagnostic software is updated to the latest version before starting.

2. Navigate to the ECM Flasher:
Tap on [ECU Flasher], then select [ECM], followed by [ECM V32.40].
Pro Tip: Use the search function in the upper-right corner of the menu page to locate the correct option quickly.

3. Review the Guide:
Tap the [Guide] button. Carefully read all provided information, including the warm reminder, menu descriptions, operation guide, special notes, and connection methods.







4. Pinout & Hardware Connection:

Click on [Pinout] and select the appropriate adapter. For this demonstration, we are using the MP001 Multifunctional Programmer.
Verify the module's physical appearance matches the [ECU Image] displayed.
Tap [PCB Pinout]. Then, open the ECM cover and solder a Boot wire as illustrated in the guide.
Tap [Connector Pinout]. Refer to the wiring diagram to ensure that all cables are correctly connected to the ECM.












5. Read/Backup Original Data:
Click [Start]. After a successful connection, the first crucial step is to back up the original flash data.
You can customize the backup file name. The saving path and a log of all operations will be displayed on the left side of the screen.







6. Enhanced File Management:
The file management system has been upgraded. You can now filter saved files by name, modification date, or file size.
Example: Quickly locate your most recent backup by filtering files based on the modification time.

7. VIN Programming:
Use the [Write VIN] function to program the desired Vehicle Identification Number into the ECM.







Operation Completed.

Video Tutorial:
For a visual walkthrough, please refer to our video guide:
https://youtu.be/X7ghH1og7as

www.obd2shop.co.uk

Oznake: obdstar dc706

24.10.2025. u 09:13 • 0 Komentara • Print • # • ^

četvrtak, 23.10.2025.

How to Register and Update Your Autel MaxiCOM MK908 PRO II

This guide provides step-by-step instructions to help you register and update your Autel MaxiCOM MK908 PRO II diagnostic tool.

Preparation
1. Power on your Autel MaxiCOM MK908 PRO II device.
2. Connect the device to a stable Wi-Fi network.
3. Once connected, tap [Next] to proceed.



Registration Process
1. From the main menu, select [Autel User Center], then tap [Register].


2. Fill in the required registration details accurately.






Important Note: If a software update notification appears during this process, follow the on-screen instructions to update the device first. Once the update is complete, return to the registration screen to complete the registration process.


Linking the Device
1. After successful registration, return to the main menu.
2. Select [Diagnostics], then choose [EOBD] to link the device.






Updating the Device
Finally, navigate to the [Update] section to check for and install the latest software and diagnostic data.




By following these steps, you can successfully register, link, and update your Autel MaxiCOM MK908 PRO II, ensuring it operates with the latest features and vehicle coverage.

For more details, please refer to the video:
https://youtu.be/d0amH7ohHYg

www.obd2shop.co.uk

Oznake: Autel MaxiCOM MK908 PRO II

23.10.2025. u 08:40 • 0 Komentara • Print • # • ^

srijeda, 22.10.2025.

Yanhua ACDP Module 42 MB DSM (FBS4) Data Transfer Tutorial

This tutorial guides you through the step-by-step process of transferring Mercedes-Benz DSM (FBS4) data using Yanhua Mini ACDP 2 with Module 42.

Check Full Operation Video:
https://www.youtube.com/watch?v=NSWoTy8J14U

Open the Mini ACDP app, and confirm that the programmer is bound.
Benz >> ISM/DSM refresh >> DSM Help
Connect ACDP to the DSM model properly.
Here's taking the A0002703252 DSM as an example.

DSM(FBS4) >> Identify info
Please use the ACDP standard power adapter(voltage+ 12V, current >= 2.5A).
Please connect the ACDP with the DSM module!

Verify that the identified info of the original vehicle module is correct.
Take a screenshot and save it.
Identify info finish.







Transfer data >> Step1: Read original module data >> OK >> Continue >> Continue
Click OK, save original data.
*Please note to back up the file's path, data, time & part numbers. The file name should end with "Orig.bin".
Read chip data finish.

Disconnect from the original vehicle module, and connect another second-hand gear shift module with the same part number.


Step2: Clear donor module data >> OK >> Continue
Verify that the identified module info is correct.
Click OK, save chip data.
* The file name should end with "CLR.bin".

The programming system is about to begin, and forbidden to power off or unplug the device during operation! Click Continue.
Erase data finished.




Step3: Write data to donor module >> OK >> Continue
Confirm that the data of the second-hand module has been cleared, and click Continue.
Click OK, select original data(File name ends with "Orig.bin").
Check if the parsed data is correct.
Click OK, save chip data.
Click Continue. Transfer data finished.

Return to the previous step.
Identify info >> OK >> Continue
Verify that the info of the transferred second-hand module matches the info of the original vehicle module.




www.obd2shop.co.uk


Oznake: yanhua acdp module 42

22.10.2025. u 08:53 • 0 Komentara • Print • # • ^

utorak, 21.10.2025.

Xhorse VVDI Key Tool Plus Programs a VW Passat B6 ID48 Key

Adding a key for the Volkswagen Passat B6 using the Xhorse VVDI Key Tool Plus is a quick and straightforward process, accomplished entirely via OBD. This guide outlines the procedure in four simple steps, including free PIN code reading. Follow the steps below to learn how.

Step 1: Read PIN Code

1. Navigate to: Immo programming > VW > Select by type > 4th immo system - Volkswagen/Skoda/Seat > VW Passat/CC key learn > Start programming.

2. Select 1 - Get PIN/CS > Read from engine(read by OBDII).

Important Notes:
` For the B6/CC/B7, you can read the engine ECU to obtain the PIN and a 6-byte CS code without needing the comfort module dump file.
a Adding a Key: The 7th byte of the CS can be obtained from a working key. For 46-chip keys, use FF for the 7th byte.
b All Keys Lost: For 48-chip keys, try to make a dealer key. For 46-chip keys, use FF for the 7th byte.
c Press "OK". A prompt will appear stating "Only support read PIN, CS, MAC now". Press "OK" again.
d Switch the ignition OFF, then ON.
e The login code will be successfully read.







Step 2: Generate Dealer Key

1. Select 2 - Generate dealer key > 48 - generate dealer key.
2. Choose Generate dealer keys with the help of ignition key.
3. You will be prompted to input the 7-byte CS code and the 5-digit password.
4. Insert a working key into the VVDI Key Tool Plus programmer.
5. The 7-byte CS code will be found successfully. Record these bytes.
6. Run the software again and use the first option (7-byte CS is known, generate dealer key). Input the 7-byte CS code and the 5-digit password.
7. Put the new, unlocked key into the VVDI Key Tool Plus Programmer.
8. The key will be made successfully and locked.









Step 3: Learn Key

1. Select 3 - program key.
2. Input the number of keys to be learned (e.g., 2) and the 5-digit password.
3. Insert each key to be programmed into the ignition switch in turn. Rotate the key until the instrument panel lights are on and hold it for a few seconds.
4. Press "OK" after completing the operation for all keys.
8. You can enter "Immo status" to confirm the number of keys learned in the system.







Step 4: Program Remote

1. Navigate to: Select by type > Remote system > 46 central comfort system (CANBUS Magotan/CC) > Start programming > Program a remote.
2. Press the central lock button once.
3. Use an invalid (non-remote) key to turn on the ignition. (For smart keys: turn off the ignition, place the smart key in the sensing area, then turn the ignition on).
4. Remove the key from the ignition.
5. Press the UNLOCK button on the remote you wish to program for 1 second. Double flashing of the indicators confirms successful matching.
6. Repeat the previous step for all remotes you want to program, then press "OK".
7. Test all remotes to ensure they are functioning correctly.

Done!





www.obd2shop.co.uk

Oznake: vvdi key tool plus

21.10.2025. u 08:58 • 0 Komentara • Print • # • ^

VAPON KATANA Decoder HU100R for BMW- In Stock, Ready to Ship!

Your professional key solution is here and ready to go! The all-new VAPON KATANA Decoder HU100R is IN STOCK, meaning you can tackle BMW key programming and servicing immediately without the wait. We are ready to ship your order today.

Engineered as a dedicated key code decoder for BMW F-Series vehicles, this professional Auto Locksmith Tool accurately reads ignition key codes - a critical first step in key cutting and programming. Whether you're servicing a sporty 1 Series, a sophisticated 7 Series, or a powerful X model, the KATANA Decoder HU100R delivers the precise data you need for efficient and reliable key generation.



Compatible with All Major F-Series Models:
BMW 1 Series (F20, F21)
BMW 2 Series (F22, F23, F45, F46)
BMW 3 Series (F30, F31, F34, F35)
BMW 4 Series (F32, F33, F36)
BMW 5 Series (F07, F10, F11, F18)
BMW 6 Series (F06, F12, F13)
BMW 7 Series (F01, F02, F03, F04)
BMW X3 (F25)
BMW X4 (F26)
BMW X5 (F15)
BMW X6 (F16)



Streamline Your Key Services. Order Now and Ship Today!
Equip your workshop with the right tool for the job. The VAPON KATANA Decoder HU100R is in stock and ready for immediate shipment.

Click to Order Your Decoder Today!
www.obd2shop.co.uk

Oznake: VAPON KATANA Decoder HU100R

21.10.2025. u 04:15 • 0 Komentara • Print • # • ^

petak, 17.10.2025.

Xhorse VVDI Key Tool Plus MQB NEC3526 PCB Wire Cutting Guide

After activating the VAG MQB license on the Xhorse VVDI Key Tool Plus Pad, it is essential to learn how to lift a pin or cut a wire before reading the NEC35xx immobilizer data. This procedure is required to proceed with key learning and all-keys-lost programming for MQB vehicles.

The following guide demonstrates how to cut the correct PCB wire on an MQB dashboard equipped with an NEC3526 immobilizer.

Step-by-Step Guide to Cutting the Wire on MQB Dashboard (NEC3526)

1. Remove the PCB Board from the Dashboard Module
Begin by carefully taking out the printed circuit board (PCB) from the instrument cluster.



2. Access the Connection Diagram in VVDI Key Tool Plus
Navigate through the menu as follows:
Immo Programming ’ VW ’ Select by Type ’ MQB Instrument Immo System ’ Instrument – MQB48 (VDO/JCI – NEC35xx Locked) ’ Start Programming ’ Programmer Read Files ’ Read NEC35xx Chip
This will display the wiring and connection diagram needed for the procedure.







3. Identify the Wire Cutting Locations
Using the diagram, locate the exact positions on the PCB where the wire must be cut.





4. Carefully Cut the Wire
Follow the instructions to cut the designated wire. Ensure that the FVDD hole no longer conducts electricity to the adjacent capacitor.
Caution: Avoid damaging nearby capacitors during the cutting process.



5. Solder the MCU Cable to the PCB
Once the wire is cut, solder the MCU cable to the board as shown in the diagram.





Completion
After completing these steps, the VVDI Key Tool Plus is ready to read the MQB dashboard immobilizer data.

Important: Once reading is complete, remember to restore the PCB by reconnecting the cut wire or repairing the board as necessary.



Video Tutorial:
https://youtu.be/fsp_NS0khqU

www.obd2shop.co.uk

Oznake: vvdi key tool plus

17.10.2025. u 09:34 • 0 Komentara • Print • # • ^

četvrtak, 16.10.2025.

How to Use EONEBOSS TLK1 Key Unlocking Device

The EONEBOSS TLK1 is a professional diagnostic tool specifically designed to reprogram and reactivate locked or accidentally deleted Toyota and Lexus keys. Using advanced technology, it enables direct matching of used keys—eliminating the need for an initial unlocking step. This streamlines key recycling, improves workflow efficiency, and lowers operating costs.



Step 1. Simulate Key Generation

Place the locked or deleted key into the TLK1 sensing area.
Press the device button to begin reading.

The TLK1 reads the key’s secure identifier (e.g., Key ID) and uses internal data to simulate a compatible key profile.

What happens: The device captures the key’s secure identifier and generates a virtual key that can be recognized by the vehicle during programming.

Step 2. Match to Vehicle

Use the TLK1 as a temporary replacement key during the vehicle’s standard key programming procedure.

Follow the specific key matching steps required by your Toyota/Lexus model.

The TLK1 transmits the key ID and necessary credentials to the vehicle, while storing related data (such as passwords and system flags) internally.

What happens: The vehicle recognizes the simulated key and registers the key ID into its immobilizer system as a new, valid key.

Step 3. Write-Back Operation

After the vehicle has accepted the simulated key and the TLK1 has retrieved all necessary data, place the original locked key back into the sensing area.

Activate the write-back function on the TLK1.

The device will write the completely restored key information to the original key.

Wait for a visual or audible confirmation (e.g., LED indicator or prompt) that the process is complete.

What happens: The original key receives the restored access credentials and is fully reactivated for normal use.



Final Confirmation – Test Key Functions
Once the write-back process is finished, remove the key from the TLK1 and test all remote and ignition functions—such as locking, unlocking, and starting the vehicle—to ensure everything operates correctly. The key programming is now complete.

www.obd2shop.co.uk

Oznake: eoneboss tlk 1

16.10.2025. u 05:10 • 0 Komentara • Print • # • ^

srijeda, 15.10.2025.

Yanhua ACDP Module 42: MB DSM FBS4 Virgin & Data Transfer Solution

Yanhua introduces the all-new ACDP Module 42, designed specifically for Mercedes-Benz DSM (FBS4) and DSM222 (FBS4) systems. This powerful module enables seamless virgin preparation and data transfer for a range of part numbers, making it an essential tool for automotive locksmiths, technicians, and Mercedes specialists.

Key Features:
1. Supports MB DSM (FBS4) part numbers:
A0002703252, A0002703352, A0002703452

2. Supports MB DSM222 (FBS4) part numbers:
A0002704252, A0002704452, A0002704652

3. Enables quick and secure virgin and data transfer operations

4. Compatible with Continental S systems



Must Be Used with YANHUA Mini ACDP 2
To unlock the full potential of Module 42, pair it with the YANHUA Mini ACDP 2 - the compact and versatile diagnostic and programming device trusted by professionals worldwide.

Easy to Use
Follow the simple connection diagram via ACDP or ACDP-2 interfaces for fast and reliable results.


How to connect Module 42 with ACDP2?
1. MB-DSM interface board: Installation required accessories.
2. Align the interface board with the DSM module interface and install it correctly.
3. Short the jumper cap to the "CAN-R" port according to the marked position.
4. MB-DSM interface board overall connection diagram.










How to connect Module 42 with ACDP?
1. MB-DSM interface board: Installation required accessories.
2. Align the interface board with the DSM module interface and install it correctly.
3. Short the jumper cap to the "CAN-R" port according to the marked position.
4. MB-DSM interface board overall connection diagram.








Why Choose YANHUA ACDP Module 42?
lSave time and effort with dedicated Mercedes-Benz support
lBoost your service capabilities with the latest FBS4 technology
lTrusted by technicians globally - backed by YANHUA quality

ACDP Configuration List


Upgrade your toolkit today and stay ahead in the automotive programming industry!

Learn more or purchase:
E-mail: Sales@OBD2shop.co.uk
WhatsApp: +86 13983755934
Telephone: +86 13983755934
WeChat: +86 13983755934

www.obd2shop.co.uk

Oznake: yanhua acdp module 42

15.10.2025. u 05:04 • 0 Komentara • Print • # • ^

utorak, 14.10.2025.

Benz W210 All Key Lost with Xhorse VVDI Key Tool Plus

The Xhorse VVDI Key Tool Plus Pad provides a solution for programming a Mercedes-Benz W210 in an all-keys-lost scenario directly on the bench. The entire process can be completed in four main steps. Follow the detailed procedure below.

Step 1: Save EIS Data

Navigate to: IMMO Programming >> Europe >> Benz >> Select from system >> EIS tools >> Start programming >> Auto detect (CAN)
Save the EIS data file to a secure location.





Step 2: Password Calculation

Navigate to: IMMO Programming >> Europe >> Benz >> Select from system >> Password calculation >> Start
The tool will display "Acquisition finished". Upload the EIS data file you saved in Step 1 using the "Upload Data" button.
After a successful upload, the VVDI Key Tool Plus will automatically begin calculating the password. This process takes approximately 50 seconds.
Once completed, the message "Password has been successfully read out" will appear.
Save the newly generated EIS file, which contains the password.






Step 3: Generate Key File

Navigate to: Prepare key file >> Start programming >> Prepare key file
Load the new EIS file (the one with the password) that you saved in the previous step.
The key file will be generated. A "Key file generation completed" message will confirm that the process is finished.




Step 4: Write New Key

Navigate to: Read write key >> Read/Write key via IR >> Start programming >> Write BE key
Load the key file that was generated in Step 3.
Insert the new BE (Smart Key) into the infrared antenna on the Key Tool Plus device.
The tool will write the data to the key. A "Writing data success" message indicates a successful operation.
Important Note: If the key is a smart key (BE), you must first install the battery and then wait approximately 1 minute before attempting to program the key to the car. During this time, the key's LCD screen will flash.

The key programming is now complete.








www.obd2shop.co.uk

Oznake: vvdi key tool plus

14.10.2025. u 03:51 • 0 Komentara • Print • # • ^

ponedjeljak, 13.10.2025.

Solved: YANHUA ACDP VW Golf Cluster Black Screen & Write Error

Problem: The 2015 VW Golf cluster has gone black after using YANHUA Mini ACDP 2 to read the data. Is there a way to fix it? It won't allow write back.



Solution
1. Restore Original Data
(1) Go to: MQB48 (VDO/JCI-NEC35xx Lock) ’ ICP ODO ’ Step Mode
(2) Select Step 3: Write Data to restore the original cluster data.






2. Verify Data Integrity
(1) Check whether the original data is intact and uncorrupted.
(2) If the data is damaged or abnormal, send it to YANHUA Technical Support for correction.

Preventing Future Issues
lAlways back up original data before making any changes.
lEnsure you are using the latest software version of your YANHUA ACDP tool.
lFollow manufacturer guidelines for VW MQB platforms to avoid cluster lock-ups.

By following these steps, you can often recover a blacked-out VW Golf cluster and avoid common pitfalls when using immobilizer and odometer tools.

Need More Help?
E-mail: Sales@OBD2shop.co.uk
WhatsApp: +86 13983755934
Telephone: +86 13983755934
WeChat: +86 13983755934

www.obd2shop.co.uk

Oznake: yanhua mini acdp 2

13.10.2025. u 09:16 • 0 Komentara • Print • # • ^

Resetting Crash Fault Codes on the HONGQI Airbag ECU with OBDSTAR P50

This guide outlines the procedure for erasing crash-related fault codes from the HONGQI 3607115-HF01 Airbag ECU using specialized diagnostic tools such as the OBDSTAR P50 or the X300 Classic G3 with Crash Reset functionality.

Video guides:
https://youtu.be/atcz8xeht8A

Prerequisites:
Ensure your diagnostic tool’s software is updated to the latest version.
A stable internet connection is required for certain functions.



Step-by-Step Procedure:

1. Launch the Software:
Open the diagnostic tool and tap on the [Crash Reset] application. Navigate to [AIRBAG RESET] ’ [AIRBAG RESET V31.37].


2. Select the Correct ECU:
Use the search function in the upper right corner to quickly locate the ECU by entering its part number: 3607115-HF01.


3. Choose Reset Mode:
Select [BENCH] mode, then choose option [P004]. Note that this step requires an active internet connection to connect to the server.


4. Review the Guide:
Tap on [Guide] and carefully read the provided instructions, including menu descriptions, operational steps, and connection methods.


5. Read ECU Information:
Establish a connection to the airbag ECU and read its information to confirm the part number matches.


6. Check for Fault Codes:
Proceed to read the fault codes. A crash-related fault code should be present in the list.




7. Erase the Crash Data:
Select the [Erase Crash] option and follow the prompts to complete the operation.




8. Clear Diagnostic Trouble Codes (DTC):
Execute the [Erase DTC] function to clear all fault codes from the system.

Verification:
Read the fault codes once more to confirm that the crash-related fault code has been successfully erased.




For more diagnostic tools and support, visit:
www.obd2shop.co.uk

13.10.2025. u 05:43 • 0 Komentara • Print • # • ^

subota, 11.10.2025.

Xhorse Dolphin XP-005 Probe Short Circuit Troubleshooting

If your Xhorse Dolphin XP-005 displays "ERROR CODE: 57, Probe short circuit, please check probe electrical conductivity", please follow this guide. Often, cleaning the probes and performing the built-in self-test via the "Electrical Conductivity Measurement" function can resolve the issue. If the problem persists, you may need to perform the following manual inspection for abnormal conductivity in the probe and milling cutter.



Inspection Method

1. Remove the Rear Cover
Carefully separate the rear cover, paying close attention to the internal wiring harness to avoid damage.



2. Disassemble Internal Components
* Remove the Phillips screws securing the wire harness.
* Remove the rubber pellets to access the screws hidden beneath them.
* Use a HEX screwdriver to remove the long strip component.





3. Access the Z-Axis and Probe Area
* Use a flat-blade screwdriver to manually rotate the lead screw. Adjust the Z-axis until its cover is aligned horizontally.
* Once aligned, remove the Z-axis housing. Install the probe in its slot next to the housing.
* Remove the screws indicated in the guide.
* Note: Be cautious of the small conductive wire inside the probe assembly.









4. Check for Conductivity and Short Circuits
Inspect the wiring for the probe and milling cutter to check for proper conductivity or potential short circuits. This check should be performed with the wires connected to the main board. Alternatively, you can plug the main board cable back in temporarily to assist with detection.



5. Inspect the Milling Cutter Shaft and Bearing
* Loosen the two Z-axis screws. Push these screws inward until a gap appears, which allows the shaft to be removed.
* Press on the milling cutter hole position and push it upward. Observe the internal white paper disc:
* If the paper is broken, the component needs to be replaced.
* If the paper is intact, check the bearing hole for any accumulated iron scraps or debris that could cause a short.





We hope this self-inspection guide is helpful. For further assistance, please feel free to contact us.

www.obd2shop.co.uk

Oznake: xhorse dolphin xp005

11.10.2025. u 08:28 • 0 Komentara • Print • # • ^

petak, 10.10.2025.

How to Perform a Throttle Relearn on a 2024 Zongshen Aprilia APR250

This guide will walk you through the process of performing a throttle relearn procedure on a 2024 Zongshen Aprilia APR250 motorcycle using the OBDSTAR MOTOMASTER diagnostic tool.

Tools Required:
MOTOMASTER
Main Cable
OBDSTAR App (for reference)



Step-by-Step Procedure:
1. Locate the Diagnostic Port: On this motorcycle, the diagnostic socket is located in the front section of the bike. For quick reference to find the port and select the correct cable, you can use the OBDSTAR app.





2. Connect the Scanner: Connect the OBDSTAR MOTOMASTER scanner to the vehicle's diagnostic port using the main cable.



3. Power On and Select Menu: Turn the motorcycle's ignition key to the ON position. Then, on the scanner, navigate through the following menu:
Select [MOTO Diag] >> [CQZONGSHEN] >> [CQZONGSHEN V33.13] >> [Diagnosis] >> [zongshen-AOOILIA] >> [APR250]



4. Access Engine Functions: From the main menu for your model, choose [ENG] (Engine). It is good practice to first read any Diagnostic Trouble Codes (DTCs). In this case, no fault codes were stored.





5. Enter Special Functions:
Select [Special Function] and then [Agree].
Choose the [Diagn.throt.self-learn.] function.
Press OK to continue.








6. Perform the Relearn Procedure:

The scanner will now instruct you to turn the dashboard off. Wait for the communication with the control unit to end.
Then, turn the ignition key back to the ON position.
The scanner will confirm that the "Regulation [was] carried out," indicating a successful throttle relearn.



The procedure is now complete. You can disconnect the scanner and start the motorcycle to verify normal throttle operation.

Video guides:
https://youtu.be/BWCl2e7YDkU

www.obd2shop.co.uk

Oznake: obdstar motomaster

10.10.2025. u 10:43 • 0 Komentara • Print • # • ^

četvrtak, 09.10.2025.

Celebrate OBD2shop.co.uk’s 14th Anniversary with Us!

It’s our 14th Anniversary — and we couldn’t have done it without you!
To thank all our loyal customers for your continued support over the years, we’re bringing you our biggest celebration sale of the year!

Promotion Period: September 30th – October 30th, 2025



Anniversary Special Deals – Limited Time Only!
Take advantage of these amazing discounts on some of our most popular automotive diagnostic and key programming tools:

Dolphin XP005L + Key Reader + Key Tool Max Pro – Ł2000 ’ Ł1984

VVDI Key Tool Plus + Solder-Free Adapters – Ł1845 ’ Ł1807

Xhorse Multi Prog Programmer – Ł615 ’ Ł568

Lonsdor K518 PRO All-in-One Key Programmer – Ł765 ’ Ł758

Launch X431 CRP919XBT OBD2 Scanner – Ł292 ’ Ł276

Launch X431 PRO3S+ Diagnostic Tool – Ł676 ’ Ł622

OBDSTAR X300 Classic G3 Full Configuration – Ł2461 ’ Ł2307

CGDI CG100X New Generation Programmer – Ł499 ’ Ł484

ACDP Module 38 + BDC2 Keys Learning Bench Platform – Ł445 ’ Ł422

Yanhua ACDP Module 33 MQB-33 + Module 34 MQB-34 – Ł485 ’ Ł435


Free Gifts with Every Purchase!
We’re not stopping at discounts — enjoy free gifts when you shop during our anniversary event:

Spend over Ł300 ’ Get a Godiag J2534 for FREE

Spend over Ł600 ’ Get a Godiag GT114 for FREE

Spend over Ł1000 ’ Get a Godiag GT110 + GT111 + GT112 for FREE


Celebrate 14 Years of Trust & Innovation
For 14 years, OBD2shop.co.uk has been your trusted source for automotive diagnostic tools, key programmers, and ECU solutions.
This milestone is all thanks to your trust and support — and now it’s our turn to give back with unbeatable deals and exclusive gifts!

Don’t miss out! Visit OBD2shop.co.uk
Today and join the celebration.
Let’s make this anniversary one to remember!

Oznake: obd2shop promotion

09.10.2025. u 02:57 • 0 Komentara • Print • # • ^

<< Prethodni mjesec | Sljedeći mjesec >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.