obd2shop

petak, 30.06.2023.

How to install additional Storage for Autel IM508

What should you do when your Autel MaxiIM IM508 runs out of space?
1. Clean up the music or picture.
2. Delete the app client does not use.
3. Reset the tablet.
The specific operation of the above three methods can refer to the following article:
(Solution) Autel IM508/IM608 stuck during update

In this article, we will introduce to you in detail how to install extra storage for Autel IM508.

We recommend a maximum of 32 gigabytes for optimal performance, make sure it is a micro SDXC with UHS-1.

After installing the SD card, you need to go to the "Data Manager", then "Vehicle Management".

Now one by one select these brands and move them to the new storage you created with your SD card.

After this is complete, return to the MaxiIM main screen then choose "Update".

Done!

You can also watch the video for the tutorial:
https://youtu.be/cLpvEbndATw

Oznake: autel im 508

30.06.2023. u 08:54 • 0 Komentara • Print • # • ^

četvrtak, 29.06.2023.

How to use CGDI CG100 to do mileage repair for Volvo S80L

This post will show you how to use the CGDI CG100 tool to do mileage repair for Volvo S80L.
Note: This tutorial was created by CGDI Technical Support and this is a share from a customer.

1. Check the car information (car type and car year).

Got the car information from VIN-- Volvo S80L.

2. Check the current mileage.

Better take a picture to record, we can see the current mileage is 160886 KM.

3. Remove the dashboard and check the chip number.
The kilometers are stored in chip: 9S12H256

4. Connect CG100 software --> Programmer --> 9S12H256

5. Connect the wires according to the diagram.

6. Read the data (check the km if the same as shown).

7. Write your target mileage of 100910 KM and wait for the software to change.

8. Put the dashboard back in the car and everything is ok.

For more technical services, please follow https://www.obd2shop.co.uk/service/

Oznake: cgdi cg100

29.06.2023. u 11:15 • 0 Komentara • Print • # • ^

srijeda, 28.06.2023.

OBDSTAR P50 Audi A6/A8/Q5 BMS Battery Reset Upgrade V30.06

A major free upgrade on OBDSTAR P50 is coming soon - Battery Reset Upgrade V30.06. Added Audi BMS 8R0915233, and 8R0915591 crash record erase and repair by bench. No disassembly, no risk to save your time and cost!

In Audi A6, A8, and Q5 hybrids, the hybrid battery management unit(BMS) disconnects and logs a P1609 fault code when a crash occurs: (!!! Crash shut-down activated!!!), resulting in the vehicle not starting.

At present, only a few auto electronic repair professionals through the brush firmware or open the cover through the programmer to repair. This way is high fees, risky, and only supports some models. Thus, OBDSTAR releases a free upgrade P50 battery module repair function again!

OBDSTAR P50 supports the BMS crash record(P1609) repair function by bench for the 8R0915233 and 8R0915591 parts. No need to disassemble and read the chip, and no risk and difficulty, which can save a lot of maintenance costs.

www.obd2shop.co.uk

Oznake: obdstar p50

28.06.2023. u 05:45 • 0 Komentara • Print • # • ^

petak, 02.06.2023.

(Solution) Autel IM508/IM608 stuck during update

Customer feedback: While updating the IM608 tablet, I found it always stuck on this interface, what should I do?

Solution: Check if the device space is full (setting>storage).

If the memory is full, try the following:
1. Clean up the music or picture.
2. Delete the app client does not use.
Refer to this video: https://www.youtube.com/watch?v=W2OXOW8T4R4
3. Reset the tablet.
Refer to this video: https://www.youtube.com/watch?v=SjkQB0otK58
4. Inserted one new SD card
Refer to this video: https://www.youtube.com/watch?v=_ufpKMi1OHw

For more technical services, please follow https://www.obd2shop.co.uk/

Oznake: Autel IM608, autel im508

02.06.2023. u 04:39 • 0 Komentara • Print • # • ^

<< Prethodni mjesec | Sljedeći mjesec >>