obd2shop

nedjelja, 31.07.2022.

Common problems and solutions when using PCMtuner

This article lists some problems and solutions that may occur while using the PCMTuner ECU programmer.

Problem 1: Go to the official PCMTuner website and get a 419 error.

Solution: Use the Firefox browser instead of Google.

Problem 2: The error shown in the figure below appears when opening the PCMTuner software.

Solution: This is caused by opening more software, restarting or ending pcmtuner in the task manager.

Problem 3: Win7 system prompts the specified file not found error.

Solution: Download and install framework 4.8. Run setup as admin, disable all antivirus and real-time scans.

For more information on PCMtuner, please pay attention to http://blog.obd2shop.co.uk/

Oznake: pcmtuner

31.07.2022. u 11:40 • 0 Komentara • Print • # • ^

petak, 29.07.2022.

GM 6L50 Gearbox Clone via Yanhua Mini ACDP and Module 22

Yanhua Mini ACDP with Module 22 can support GM 6TXX / 6LXX gearbox clone, this article will take GM 6L50 as an example to guide you on how to do it.

The accessories we need:
20 PIN Cable
OBP+ICP Adapter
ACDP Host
6LXX Interface Board

Connect the ACDP, OBP + ICP adapter, interface board and gearbox as the picture shows.

Open the Mini ACDP APP, choose "GM" ’ "Gearbox clone" ’ "GM 6L50"

Backup chip data

Choose "Full backup data", and make sure the gearbox is connected with ACDP.

Confirm the system information and save the screenshot, click continue.

After the clip data has been read successfully, click "Save" in the lower right corner.

Write chip data

Choose "Full Write data", and make sure the gearbox is connected with ACDP.

Confirm the system information and save the screenshot, click continue.

Select the original data file that saved in the previous step.

The device is about to write clip data, please make sure these two gearbox computers' model are the same.

Writing chip data finished.

For more detailed steps, please refer to the video:
https://youtu.be/eEkpA9ko6KQ

Oznake: yanhua mini acdp

29.07.2022. u 09:12 • 0 Komentara • Print • # • ^

četvrtak, 28.07.2022.

Yanhua FEM/BDC Special Programming Clip for 95128/95256 Chip

Yanhua FEM/BDC Special Programming Clip is designed to pre-process BMW FEM/BDC module without having to remove or solder 95128/95256 chip. With it, you don't need to worry about how thick the paint on the chip!

Highlights
1. Fast clamping
2. Safe & reliable
3. Simple positioning, not easy to slip.
4. Easy to solve the problem of chip paint thick & puncture socket slip off.
5. Compatible with Yanhua Mini ACDP, CGDI, VVDI, Autel, Launch X431.

How to install FEM/BDC Special Programming Clip?
1. Insert the 2 screws of the special programming clip into PCB plate holes.
2. Lock the PCB lock.

FEM connection diagram

BDC connection diagram

http://blog.obd2shop.co.uk/yanhua-fem-bdc-special-programming-clip-for-95128-95256-chip/

Oznake: yanhua mini acdp

28.07.2022. u 17:52 • 0 Komentara • Print • # • ^

utorak, 26.07.2022.

Solved: Lonsdor K518ISE Unable to Bind LKE Smart Key Emulator

Problem: I've got the Lonsdor K518ISE Key Programmer recently, but failed to bind LKE Smart Key Emulator to K518 for several times.

It says:" Please place key emulator into this device's card slot." or "Failed to obtain data, please make sure the key emulator is placed correctly in this device's card slot."

How to solve, any ideas?

Solution
1. Make sure the battery is installed.
2. Try different positions with few more times, noticed the coil head should place down in Lonsdor K518 key slot. Can also open key shell.

3. Check LKE key version: Special functions >> Simulated chip >> Obtain LKE data
4. Update LKE key if it was BOOT version: Special functions >> Simulated chip >> Generate simulated chip >> 4D type >> Blank 4D simulated chip

Feedback
Thanks to Obd2shop engineer, problem was solved!
LKE smart key can be normally used.

Read also
How to Bind LKE Smart Key Emulator to Lonsdor K518ISE?

Technical support
www.obd2shop.co.uk

Oznake: lonsdor k518ise

26.07.2022. u 02:54 • 0 Komentara • Print • # • ^

četvrtak, 21.07.2022.

Godiag GT107: Repair DSG Gearbox for PCMtuner KESS V2

Godiag GT107 Gearbox Data Adapter is designed to clone, diagnose and repair DSG gearbox ECU for maintenance engineers. Supports gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501. Perfectly compatible with PCMTuner, KESS V2, PCMFlash, KTMBench, etc.

Features
l Read, write, adjust DSG gearbox data.
l Support PCMflash module 58 all DSG models.
l Easy operation, 2 selection modes for PCMFlash(auto/manual), manual mode for other ECU diagnostic software.
l Indicators can show communication status during working.
l Support car battery power supply.

Attached:
Godiag DSG GT107 PIN OUT
DQ200(0AM, 0CW), DQ250(02E,0D9), VL381(0AW), DQ500(0BT, 0BH)

V30(01J), VL300(01J)

DL382(0CK), DL501(0B5), Renault DC0/DC4 Gen2, Honda LuK-UDCT

PCMTuner + GT107 clone gearbox connection diagram

KESS V2 + GT107 clone gearbox connection diagram

GT107 clone gearbox on car connection diagram

Godiag GT107 + PCMTuner read DQ250(02E) ECU
1. Connect GT107, gearbox & PCMTuner;

2. Press ignition button to switch manual mode for diagnosis:
(GT105 red & blue lights are continuous flashing)
[58] VAG: DQ250C(02E)K-Line/ >> Identification

3. Press GT107 button to switch auto mode for data reading:
(GT105 red & blue lights are on but stop flashing)

[59] DQ250E/FMQB Boot(MICRO) >> Identification >> Read
(* When GT107 green light is on, it's "Auto", otherwise it's "Manual".)

Godiag GT107 + PCMTuner chip tuning DQ200 ECU
Select ECU: [58] VAG: DQ200/MQB Boot(MICRO)
(*PCMTuner supports 120© power supply, no need to press red button for short-circuit. For KESS will need.)

Godiag GT107 + KESS V2 read DQ200 ECU
1. Connect GT107, gearbox & KESS according diagram;
2. Press 120© red button & ignition button for manual mode;
3. Open KESS software:
Temic DQ200 >> Read >> ID/Reading

Godiag GT107 + KESS V2 read DQ250 ECU
ECU model: DQ250(02E)
KESS path:
Temic DQ250 >> OK >> ID/Reading

http://blog.obd2shop.co.uk/godiag-gt107-repair-dsg-gearbox-for-pcmtuner-kess-v2/

Oznake: godiag gt107

21.07.2022. u 15:49 • 0 Komentara • Print • # • ^

ponedjeljak, 18.07.2022.

VOCOM II Mini WiFi Setup & Firmware Update Instruction

VOCOM II Mini is a wireless device that supports to diagnose Volvo heavy duty truck via WiFi. Small and portable, no need wires. This is an initial guide on WiFi setting & firmware upgrade.

How to setup Volvo VOCOM 2 WiFi?
1. Power on the Mini Vocom2 dongle and the lights will be flashing. Find the WIFI signal Vocom2D_******* from laptop. Click "Connect".

2. Input “v2d+ SN num”, SN number is 7 digits which you can find it from backside of the VOCOM2 dongle. Then click "OK" and done.

How to update Volvo VOCOM 2 firmware?
Note: Make sure the Mini Vocom2 is powered up by 24V ECU or truck. Low voltage will affect the upgrade process.
Follow the path:
All Programs >> VOCOM II >> VOCOMII Configurator >> Setting >> Advanced >> Update device firmware >> Update button

It'll run the TECH TOOL automatically when firmware update finished...

http://blog.obd2shop.co.uk/vocom-ii-mini-wifi-setup-firmware-update-instruction/

Oznake: volvo vocom ii mini

18.07.2022. u 02:34 • 0 Komentara • Print • # • ^

četvrtak, 14.07.2022.

Autel MaxiSYS MS906 Pro-TS Quick Start Guide

This quick start guide covers the wifi setting, registration, and updating of Autel MaxiSYS MS906 Pro-TS Bi-Directional Diagnostic and TPMS Service Tablet.

Part 1. Autel MaxiSYS MS906 Pro-TS Wifi Setting

Once you fire up your tool, the first step should be to connect to a wifi network which you can find in settings, system settings, then wifi, toggle on the wifi and allow the device to compile a list of available networks.

Choose your network, then enter your credentials to join the network.

Part 2. Autel MaxiSYS MS906 Pro-TS Registration

Once you are on wifi you will need to register your new tool this can be done quickly and easily right on your tablet or at pro.autel.com.

If you already have an Autel account just sign in with your account id and password.

For first-time Autel buyers click on the create Autel id button on the bottom.

Enter your email address, then click acquire verification code, and check your email for the code.

Once you have the code, enter your password.
Please note your password must consist of seven numbers and at least one letter.
Next enter your verification code and click sign up.

Once you have confirmation click register to register the tool.
Your serial number and password will self-fill click register, and now you get a confirmation that you have successfully registered your tool.

Part 3. Autel MaxiSYS MS906 Pro-TS Updating

This is perhaps the most important step you need to ensure your software is up to date.

Click update starts at the top and installs any system updates that are available, next proceed to any brands that you routinely service in your shop.

Once you're done select TPMS at the top and check for any TPMS updates that may be available.

After you complete these updates, power up and connect to your VCI to check for available updates.

If there's an update available install the update please note that do not leave the screen until the VCI update is finished installing.

For more information on Autel MaxiSYS MS906 Pro-TS please follow https://www.obd2shop.co.uk/

Oznake: autel maxisys 906 pro ts

14.07.2022. u 14:38 • 0 Komentara • Print • # • ^

ponedjeljak, 11.07.2022.

Orange 5 Super Pro V1.35 Free Download & Operation Instructions

Here Obd2shop.co.uk provides the latest 2022 free download link for Orange 5 Super Pro V1.35 full function & V1.36 software. Safe and virus-free, 100% tested!

Where to free download Orange 5 Super Pro:
https://mega.nz/file/6c4nBQJb#StikKVtqZ0ucFEP1WqDkCOlKeI5PwbD7ZslH70rt3ZQ
Size: 1.88G
(Super Pro: 2G, V1.36 software: 60MB)

Orange 5 V1.36 Version:

https://mega.nz/file/eYxhlBKC#ItU2jSjrpBTVZShJU_CIaU0Gvid8tWK4lV25m9Pdang

Size: 214MB

Operation Instruction
1. Before installing Orange 5 Super Pro software, please connect the device to the computer.

2. When the "USB device not found" pop-up window appears, the device driver is not installed.

3. Computer Management >> Device Manager >> Ports(COM&LPT) >> USB Serial Device(COM5) >> Update driver >> Browse my computer for driver software >> Browse >> orange5_SUPER PRO >> Driver >> x32/x64 >> Next
Once the "ORANGE5 USB" is coming out, which means successful.

4. Before opening Orange 5 Super Pro V1.35 software, please connect the chip to be tested.

5. Orange 5 has 2 languages: English & Russian(Options >> Language)

http://blog.obd2shop.co.uk/orange-5-super-pro-v1-35-free-download-operation-instructions/

Oznake: orange5

11.07.2022. u 07:03 • 0 Komentara • Print • # • ^

petak, 08.07.2022.

This article solves the problems related to updating the PCMtuner ECU programmer software.

Part 1. How to upgrade the software

The software is divided into 2 parts
1) PCMtuner online upgrade
When there is a new version prompt, just click "OK" to upgrade.

2) PCMflash cannot be upgraded online
Subsequent upgrades i.e MG2 MD1 etc, are realized by new adapters.

Part 2. Errors caused by software upgrades

Problem: USB Dongle Not Accessible error caused by upgrading PCMflash software.

Uninstall pcmflash1.2.5 and reinstall the app 1.20 software (make sure to disable the antivirus software)

pcmflash 1.20 installation package: https://mega.nz/file/Gr5i1KAJ#HV2rPWP7T2cmGFr7EJM2-LZilNGGUDeI7QXRqQbf1gI

For more technical services of PCMtuner, please continue to pay attention to http://blog.obd2shop.co.uk/

Oznake: pcmtuner

08.07.2022. u 08:59 • 0 Komentara • Print • # • ^

četvrtak, 07.07.2022.

GODIAG GT103 vs. All-Sun EM285 vs. TYRAREX Circuit Tester

What's 2022 the most cost-effective circuit tester? Obd2shop has picked out 3 automotive tools to make a comparison: GODIAG GT103, All-Sun EM285 & TYRAREX power probe. Which is worth buying? Let's take a look.

Differences
1. All 3 circuit testers are cheap, not much different in price.
2. GODIAG GT103 supports more features than others, such as fuel injector DIY cleaning, relay test, audible pulse prompt, circuit monitor, etc.
3. GODIAG GT103 supports up to 10A while the others support less.
4. GODIAG GT103 is equipped with better accessories and protection.

Conclusion
In all respects, GODIAG GT103 Circuit Tester wins. It is an ultra-cost-effective power probe three. For consumers, 10 pounds difference is nothing, but having more useful features is worth the price.

Read also
Godiag GT103 vs Godiag GT101 vs.Godiag GT102 Circuit Tester
4 Most Recommended Affordable Power Probe 2021

Oznake: godiag gt103

07.07.2022. u 10:22 • 0 Komentara • Print • # • ^

ponedjeljak, 04.07.2022.

J518 ELV Module Emulator Instruction for Audi C6 Q7 A6

This is an operation instruction on how to use J518 ELV Module Emulator to repair Audi C6 Q7 A6 steering column lock.

Steps for 9S12DG 128 CPU Car
1. Read out EEPROM data with VVDI PROG. Remember to backup the data in case of operation mistake.
2. Put EEPROM file into "EEPROM 2K-4K" folder

, then double-click EEPROM converter application. The 2K file will start transforming. Once the file has changed to be 4K, which means conversion is successful.

Note: Can only double-click one time, please DO NOT repeat. If the operation or conversion failed, right-click to run the program in administrator mode.

3. Connect flashing wire to write the converted EEPROM file.
Note: Please select J518(2010)(0L01Y) for 256 chip simulator.
(Each J518 ELV Simulative Board is with EEPROM & Flash data, usually users just need to write EEPROM. If not, can also write original car EEPROM plus FLASH data in instruction.)

Steps for 9S12DG 256 CPU Car
1. Read out & save the original car data.
2. Write data directly to J518 simulator.

Connection
VVDI burning line:
Red(thick) - VCC
Black(thick) - GND
Yellow - RST
Purple - BKGD
Green - XCLKS
White - CLK
Black(thin) - GND-C

Without Horn Wiring Diagram
Buy solder-free burning line from us, can plug into 20pin port directly.

With Horn Wiring Diagram
Simply connect according to the marks on board.

Note:
1. It's more recommended to test on vehicle after successful written.
2. To test on bench, make sure the connection on 20PIN port is correct. For wrong connection may cause chip damaged.
Eg.
Wrong connection: 10PIN position (red marked)
Correct connection: 20PIN position (blue marked)