OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

utorak, 26.07.2022.

Solved: Lonsdor K518ISE Unable to Bind LKE Smart Key Emulator

Problem: I've got the Lonsdor K518ISE Key Programmer recently, but failed to bind LKE Smart Key Emulator to K518 for several times.

It says:" Please place key emulator into this device's card slot." or "Failed to obtain data, please make sure the key emulator is placed correctly in this device's card slot."





How to solve, any ideas?

Solution
1. Make sure the battery is installed.
2. Try different positions with few more times, noticed the coil head should place down in Lonsdor K518 key slot. Can also open key shell.


3. Check LKE key version: Special functions >> Simulated chip >> Obtain LKE data
4. Update LKE key if it was BOOT version: Special functions >> Simulated chip >> Generate simulated chip >> 4D type >> Blank 4D simulated chip


Feedback
Thanks to Obd2shop engineer, problem was solved!
LKE smart key can be normally used.

Read also
How to Bind LKE Smart Key Emulator to Lonsdor K518ISE?

Technical support
www.obd2shop.co.uk

Oznake: lonsdor k518ise

26.07.2022. u 02:54 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.