obd2shop

srijeda, 27.09.2023.

Lonsdor K518 Chery Update: Support Programming via OBD

Now, Lonsdor K518 series has been updated to support OBD programming for Chery vehicles. Read on to find out more details.

Support Models:

EXEED
LX LX (ETI) RX

JETOUR
Dashing

CHERY
E3 E5 EO1 EO5 Chery A15 Tiggo 3 Tiggo 5
Tiggo 5X Tiggo 7 Tiggo 8 Tiggo e Tiggo Facelift
Arrizo 5 Arrizo 5E Arrizo 7 Arrizo 7E Arrizo e
Fulwin 2 Arrizo GX Arrizo M7 ArrizoM7(PHEV)

KARRY
Riich K50 K50S K60 K70

COWIN
C3 C3R E3 V3 X3 X5

Please update your device for the details.

www.obd2shop.co.uk

Oznake: lonsdor k518ise

27.09.2023. u 05:41 • 0 Komentara • Print • # • ^

utorak, 26.09.2023.

Yanhua Mini ACDP Module 31: BMW F Chassis BDC IMMO via OBD

New Yanhua Mini ACDP Module 31 for BMW F chassis BDC IMMO via OBD is coming, needs to work with Mini ACDP-1 or Mini ACDP-2 basic module.

Module 31 Functions:
1. Exclusively supports 2 methods to preprocess BDC: OBD CAN & OBD DoIP;
2. Supports BMW F chassis BDC key programming & mileage reset via OBD.

Module 31 Features:
1. Fully OBD operation, no need to disassemble or assemble the BDC module, no risk of dismantling the BDC or damaging the 95256 chip.
2. DoIP protocol preprocessing only takes tens of seconds, fast, safe, and stable.

How to use the OBD CAN Method?
1. Connect Mini ACDP or Mini ACDP + DoIP adapter to OBD;
2. Connect Mini ACDP-2 + OBD adapter or Mini ACDP-2 + OBD extension cable to OBD.

How to use the OBD DoIP method?
1. Connect Mini ACDP + DoIP adapter to OBD;
2. Connect Mini ACDP-2 + DoIP adapter to OBD;

Note:
1. Please ensure the connection is good and the vehicle has enough battery voltage.
2. Please DO NOT cut off the power or pull out the device during the operation.

www.obd2shop.co.uk

Oznake: yanhua mini acdp module 31

26.09.2023. u 03:53 • 0 Komentara • Print • # • ^

četvrtak, 21.09.2023.

Xhorse VVDI Key Tool Plus VA Version vs. Advanced Version

Xhorse has released a new VVDI Key Tool Plus VA version, focused on VAG IMMO programming like Volkswagen, Audi, Porsche, etc. What's it different from the Key Tool Plus advanced version? Here we have the comparison table.

Comparison Table

Conclusion
Xhorse VVDI Key Tool Plus VA price is half cheaper and it does not have BMW & Mercedes-Benz IMMO programming function that requires additional activation. Other than that, everything else is the same.
www.obd2shop.co.uk

Oznake: key tool plus va version

21.09.2023. u 04:50 • 0 Komentara • Print • # • ^

srijeda, 20.09.2023.

Lonsdor K518 Series Ford Lincoln IMMO Update

Lonsdor K518 Series Ford Lincoln IMMO Update

Good news!!! The Lonsdor K518 series has been updated to be able to support programming via OBD and add keys without PIN codes for the latest Ford/Lincoln vehicles (2022-). Please read on to figure out more details.

Support Models:

Ford (USA)
Edge(2020-)
Mustang(2020-)
Explorer(2020-)
Transit(2020-2021)
F-250 Raptor(2020-2022)
F-350 Raptor(2020-2022)
F-Series Super Duty(2020-
Expedition(2020-2021)

Ford (Europe)
Transit(2020-2021)

Ford (South America)
Transit(2020-2021)

Lincoln
Aviator(2020-)
Nautilus(2020-
Navigator(2020-2021)

Please update your device for the details.

www.obd2shop.co.uk

Oznake: lonsdor k518ise

20.09.2023. u 05:45 • 0 Komentara • Print • # • ^

ponedjeljak, 18.09.2023.

Yanhua Mini ACDP Transfer License Operation Guidance

Yanhua has announced the first generation of the Mini ACDP device was disabled. What to do after purchasing the Transfer License service? Here we offer 2 methods to help transfer the license to Mini ACDP 2.

Read also
What's Yanhua Mini ACDP Transfer License Plan A & Plan B?

Method 1. Transfer by Yanhua
Provide the back photo of both devices to the online service, Yanhua factory will help to transfer all licenses. Customers can use ACDP-2 directly without any operation.

Method2. Transfer by Yourself
Check the video to learn:
https://www.youtube.com/shorts/27vVBX6HvOQ

1. Send the SN of both devices to the dealer or manufacturer to obtain an authorization transfer code.
2. Open Mini ACDP app >> Me >> About, make sure the Android version is 3.0.107 or newer/ IOD version is 3.1.0 or newer.

3. Power on the Mini ACDP 1 and make sure the ACDP is bound.
4. Me >> License Transfer >> Transfer >> Enter the authorized transfer code obtained and SN of the new Mini ACDP 2 >> Submit

The authorization share is successful, please connect device ACDP2-E901C to confirm!

www.obd2shop.co.uk

Oznake: yanhua mini acdp 2

18.09.2023. u 09:47 • 0 Komentara • Print • # • ^

srijeda, 13.09.2023.

How to transfer License from Yanhua Mini ACDP1 to ACDP2?

As we know, the new Yanhua Mini ACDP 2 has been coming out to replace ACDP1, which will require users to transfer all licenses for continuous service. ACDP-2 License Transfer Plan can help to solve the problem. Therefore, it offers 2 options for choice:

1. Plan A-License Transfers
Plan A allows to transfer of all licenses from ACDP-1 to ACDP-2, which means to delete ACDP-1(ACDP-1 CANNOT be used anymore).
Cost

2. Plan B-Shared License
Plan B can share all ACDP-1 licenses with ACDP-2, which means both devices can be used at the same time after sharing the license.

Notice: In case you buy a new module after sharing the plan, this new module license only can be used on ONE module.

The cost will be 35% of the total amount of the shared module's official price.

Please send your ACDP-1 SN(backside of the device) to the manufacturer or distributor to check the exact price.

*Both plans need to buy the ACDP-2 Basic Module first.

At present, most Yanhua modules are common, no need to re-purchase any new modules. Just take note of below:
1. It needs to cut the protruding part when using module 18/19/25/30 for Mini ACDP 2;
2. Module 3/8/12 can be used directly for Mini ACDP 2.

www.obd2shop.co.uk

Oznake: yanhua mini acdp 2

13.09.2023. u 09:43 • 0 Komentara • Print • # • ^

ponedjeljak, 11.09.2023.

OBDSTAR DC706 Clone BMW MSV90 ECM on Bench

This is a quick guide on how to use the OBDSTAR DC706 ECU Tool to clone BMW MSV90 ECM on bench. Besides, it also supports clone MEVD17.2.6 EXX, MEVD17.2.6 FXX, MSD80, MSD85, and MSD54 ECM.

Tools Required
OBDSTAR DC706
Main cable
P004 Adapter + P004 ECU Clone Jumper
BMW MSV90 ECM

Please keep DC706 charging & communicating throughout the whole process.

Operation Process
ECU Flasher >> ECM >> Latest version >> BMW >> BMW Continental MSV90 TC1796(BENCH) >> Start
This function is available by connecting the server, please ensure the Internet connection is normal.

Remarks: Click operation instructions at the bottom left to check the best detection method.
Connecting the harness according to the wiring diagram.
Follow the interface prompts:
Switch the ignition off.
Switch the ignition on.
Read INT eeprom, INT flash(TC1796), Maps, and ISN code.
Please check the log on the left side screen to see the saved path of reading data.

After successfully saving, write INT eeprom, INT flash(TC1796), and Maps.
The ECU clone operation is completed.
Remember to disconnect before exiting.

www.obd2shop.co.uk

Oznake: obdstar dc706

11.09.2023. u 10:35 • 0 Komentara • Print • # • ^

srijeda, 06.09.2023.

Toyota FP-30 Cable 4A-BA/8A-BA Support Car List

Lonsdor FP-30 Cable is used to program Toyota 8A-BA and 4A models(smart key box with 30pins) all key lost without pin code. No need to pierce, hook, plug or unplug harness during operation, easy without risk.

Compatible with Lonsdor K518ISE, Lonsdor K518S.

Support Car List
4A-BA models
Corolla Cross 2022-
Yaris Cross 2021- (XP210)
Yaris 2020- (XP210)
Frontlander 2022-
Corolla Facelift 2022-(E210)
Corolla Cross Facelift 2022- (XG10)

8A-BA models
Sienna 2020- (XL40)
Sienna HV 2022-
Land Cruiser 2021- (J300)
RAV4 Facelift 2022- (XA50)
RAV4 PHV 2022-
Venza HV 2022-
Harrier/Venza 2020- (XU80)
Harrier 2022-
Harrier HV 2022-
Tundra 2021- (XK70)
Granvia HV 2022-
Wildlander PHV 2022-
BZ4X 2022-

Oznake: lonsdor fp 30 cable

06.09.2023. u 11:05 • 0 Komentara • Print • # • ^

ponedjeljak, 04.09.2023.

Xhorse VVDI BMW Tool + GODIAG Test Platform Identify FEM Key

This is a demonstration of how to use the Xhorse VVDI BIMTOOL PRO + GODIAG Test Platform to identify BMW FEM/BDC keys. With the help of GODIAG, engineers can easily test whether the communication is normal or there's any malfunction in FEM/BDC module.

Check the full video to learn:
https://youtu.be/8F7RrPTuF3g
Connection
GODIAG BMW Test Platform has 4 lines: CON8, CON7, Odometer connector and FEM/BDC power connector.

- Connect BIMTOOL Pro to PC via USB cable
- Connect BIMTOOL Pro & GODIAG via OBD2 to BD25 cable.
- Connect GODIAG to FEM/BDC module via 4 lines.
- Plug in the power.

Programming
Open the BMW Tool Software to start key identification.
Put the key into the identification area of the GODIAG BMW FEM/BDC programming test platform. Then press the button.
VVDI will display all key information in the software.

After successful recognition, we can click "Backup Coding".