OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

Below I will guide you on how to upgrade COROLLA 4A cable to the TOYOTA-27 cable.
Of course you can also directly buy OBDSTAR CAN DIRECT KIT which includes CAN DIRECT cable and TOYOTA-27.

Step 1. Remove the heat shrink tube part as in the picture below from COROLLA 4A.



Step 2. Break the insulation of the red wiring (power cable) and find the matching DuPont line (female).



Step 3. Connect the DuPont line (female) to the red wiring point (power cable) as shown below.



Step 4. Insert the DuPont cable into the NO. 4 hole as in the picture below and protect it with electrical tape to avoid short circuits.





Done!

For more technical services, please follow http://blog.obd2shop.co.uk/

Oznake: OBDSTAR

srijeda, 19.10.2022.

OBDSTAR Upgrade: Toyota/Lexus 2018+ 8A-AA Add Keys & AKL

OBDSTAR X300 DP PLUS/ X300 PRO4 can now program 2018+ Toyota/ Lexus 8A-AA proximity add keys & all keys lost with free pincode. Need to work with CAN Direct Kit & Key Sim.

Covering Toyota Highlander HV, Avalon, RAV4/RAV4 HV, Crown Kluger HV; Lexus ES, RX, UX.
Also supported
8A-A9: 2018- Camry, IZOA, CHR, LS...
4A: 2019- Corolla...

Key Master DP Plus Program 2020 Toyota Avalon SIM Key
lTools Required:
Key Master DP Plus
Main cable
CAN Direct Kit(CAN Direct, Toyota-27)
Key SIM



lConnection
Connect Toyota-27 with IMMO smart box.
Connect CAN direct with OBD.
Please connect cables referring to the video:
https://youtu.be/B_xaoOLRMXY

lOperation
1.Read IMMO Data
Car IMMO >> Asia >> LEXUS TOYOTA SCION >> Latest version >> Manual select system >> Proximity >> Type 9(8A-AA) >> Read IMMO data >> Operation in the car(CAN DIRECT KIT)

Please connect the diagnostic device, SMART KEY ECU, and vehicle OBD through the CAN DIRECT KIT.
This function is available by connecting the server, please ensure the Internet connection is normal.
Save IMMO data file.








2.Make Simulated Key
Make simulated card(Key SIM) >> Enter
1)This function can make simulated key when all the keys are lost;
(note: simulated key needs to be kept charged, and it needs to be made again after the power is off)
2)The simulated key can replace the original car key to add keys, erase keys and other operations;
3)Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.

Select the IMMO data file just saved.
Connect Key Sim simulator.
Loading...please wait
Generate simulated card successfully.






3.Add Smart Key
Move the simulated card close to the start button and try to light the meter.
If you can light up the meter normally, use the simulated card instead of the original card key for the "Add smart key" operation.

Restore IMMO smart box cable
The simulated key makes engine started successfully.
New keys can be added via IMMO data files as well(free pincode).


www.obd2shop.co.uk

Oznake: obdstar x300 dp plus

ponedjeljak, 17.10.2022.

VNCI J2534 Nano Free Download & Installation Guide

VNCI J2534 Nano is a device to work between diagnostic software & vehicle, compatible with J2534 Passthru & ELM327. There are a total of 6 software tested by VNCI NANO equipment, including:
1.ODIS V9.0
2.TIS V17.00
3.HDS V3.102
4.FORSCAN V2.3.48
5.PCMFLASH V1.2.0
6. SCANMASTER V2.1

Free Download VNCI NANO Software
VAG ODIS:
https://mega.nz/file/aihm0AIT#_YgcOUa9QUxrg92PFo1rK0zU-Gx-Wy_7B2iCC49QiO4
Toyota 17.00.00/17.20.013: 
https://mega.nz/file/6ZABzbxS#PNHECjMr1S7mDMGWuOOK-6icrSV5cFsL2FbZONEg01c
HDS HONDA 3.104.024:
https://mega.nz/file/JgtEkb4K#jDs8le68Bz6soLyJ9H7LB061C3_BvbKgnIwA1dp7JzE
JLR SDD 163 :
https://mega.nz/file/DJ4FySzY#n8sa8xFRArey0k8XeK8KAERioOmO7u7knf5DrQHAhmk
Forscan 2.3.48:
https://mega.nz/file/XQ4kAQBI#4CujUR7XKRnQ0_MsXcQvryumnHruPmy9qNdpahqIeYQ
SCANMASTER v2.1:
https://mega.nz/file/PQpynZDD#mNdKmUxh6FHqGUdvb8LQEJgb5Y3_W4X_-I7uXVK1hdo
FCMFLASH 1.20:
https://mega.nz/file/TIw1EBwY#hIclEWBhhU9ByjLgoQrCRG8VRTOb82I0m51oEGyxiPQ
VNCI NANO driver:
https://mega.nz/file/iERnEL7R#KEEKbXzuHx7spOV-3fRz1EkEbJHemANwGjHv1fXq7Bk

NOTE:
Each software needs to select VNCI NANO interface when using, among which the anti-theft function of HDS software needs to change the registry before it can be used. The Volkswagen ODIS software is difficult to install and needs to be solved by the customer. Do not change the installation path of all software during installation. By default, they are installed on the C drive.

All software needs to install the VNCI NANO driver when using it.

Operation Methods of All Software in VNCI NANO
lHonda
1.Unzip "hds3v102.zip" package;
2.Open the "hds" folder, find the "setup.exe" program to run it;
3.When the option to select a region pops up, the USA must be selected;

4.After installation is completed, you should change the interface settings for the first-time to run HDS software:
Default DTC information: must selected "RKW-VNCI Nano";



5.The device can be normally used when the content below displayed.


For customers who need to use the HDS anti-theft function, they also need to change the registry information before they can be used.
Operation steps:
1.Search regedit on the shortcut bar of the computer, enter the Registry Editor.
2.Find: the corresponding directory, change the value data to 200000.
There are 2 changes in total. After the change, connect the vehicle and enter the software, there will be an anti-theft option,and if it is not changed, there will be no anti-theft option.










lTIS
1.Complete installation: Run "Techstream_Setup_V17.00.020.exe" >> Next;
2.You will be prompted to select an area for first time using, just select the area corresponding to vehicle, and you can also change it in the software later: Setup >> Techstream Configuration >> Area Selection;
3.When registering, confirm the area -- software version number - each area needs to be registered for the first time using, and the registration time can be selected at will;
4.After the registration is completed, you need to select the VNCI NANO interface before using: Setup >> VIM Select >> RKW-VNCI Nano







lPCMFLASH
1. PCMFLASH software is special and needs to be solved by customers themselves.
2. After the installation is complete, select the VNCI NANO interface to use.


lFORSCAN
1.Install "FORScanSetup2.3.48.release.exe";
2.Select VNCI NANO interface to use.


lSCANMASTER
Note: please turn off anti-virus software during installation.
The specific registration steps and installation steps are described in detail in the SCANMASTER software installation package.

1.Open "ScanMaster-ELM v2.1" folder;
2.Click to install "ScanMaster-ELM v2.1";
3.Open "ScanMaster-ELM" to copy install code, then paste it in "KeyGen-scanmaster" to get the registration code;



4.Click on the desktop "ScanMaster-ELM", enter the obtained registration code;

5.Click on the desktop "ScanMaster-ELM", when the interface appears, the registration is successful.


lODIS
1.Due to the troublesome installation method of ODIS software, we will not install it. We cannot provide the installation method for the time being. If you can install this software, please share the installation steps with us.
2.After the ODIS software is installed, choose to switch to the VNCI NANO interface to use it.


www.obd2shop.co.uk

Oznake: vnci j2534 nano, vnci nano

petak, 14.10.2022.

JLR ZF-9HP gearbox clone (BOOT) via Yanhua Mini ACDP

ACDP module 28 supports Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, and other models of the ZF-9HP gearbox computer BOOT mode clone.

This post will take JLR as an example to make the ZF-9HP gearbox cone with ACDP Master and module 28.

Check all the accessories we need.

Step 1. Connect and install

Disassembling the ZF-9HP gearbox computer case.
Remove the 3 screws of the interface board.
Install the copper pillars.

Put the CPU positioning frame on the CPU.
Install the ZF-9HP BOOT interface board. Then lock the board with copper pillars.
Install the ZF-9HP Port interface board, and connect two interface boards with an 8PIN cable.

Connect the OBP+ICP adapter with the 20PIN cable.
Short the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN" side.
Connect the ACDP host.

For more detailed installation steps, please refer to the video:
https://youtu.be/yJ0VpH-BiuI
Step 2. Identify
Open ACDP APP, select "Jaguar/LangRover" >> "Gearbox Clone" >> ZF-9HP(BOOT)

Choose "Identify", confirm system information, and click "Continue".

BOOT point pin detection passed, click"Continue".
Confirm the system information and click "OK".
Identify system info finished.

Step 3. Full Backup Data
Choose "Full Backup Data", BOOT point pin detection passed, and click"Continue".

Confirm system information, and click "Continue".
Reading chip data...
Save chip data, and click "OK".
Reading chip data finished.

Step 4. Full Write Data
Connect another ZF-9HP gearbox computer.

Then choose "Full Write Data"
BOOT point pin detection passed, click"Continue".

Confirm system information, and click "Continue".
Select chip data: click the chip data file saved in Step 3.
Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Writing chip data...
Writing chip data finished.

https://www.obd2shop.co.uk/

Oznake: yanhua mini acdp

četvrtak, 13.10.2022.

(Solved) KT200 software Cannot find 'DFB2XX.dll' Error

Problem: After installing the KT200 software, it cannot be opened or reinstalled and the message "Cannot find 'DFB2XX.dll'" is displayed. What should I do?

Solution: Copy the DFB2XX.dll file to the C:WindowsSysWOW 64 directory, if it is a 32-bit system, the path is C:WindowsSystem32

DFB2XX.dll file Download free:

https://mega.nz/file/t4xmhIoC#BBzV4tnoacSGA3vB-AwQDVP7gzWwT7ouSd2-yqm_Qqk

Note: The files in this link are compressed packages, which must be unzipped before replacement.

For more technical support, please follow http://blog.obd2shop.co.uk/

Oznake: kt200 ecu programmer

srijeda, 12.10.2022.

KT200 10.01 Free Download & ECU Coverage New Update

Here www.obd2shop.co.uk provide the latest version KTM200 10.01 software free download link and ECU supported update content.

Where to free download KT200 10.01
https://mega.nz/file/MKd03YQA#wpv1vARRRYNx9dERkYbIIoPdoaEMrVErVVLRUJYJP4k
Size: 885.6MB
Operating system: Win7, Win8/8.1, Win10, Win11

KTM200 ECU Programmer New Features
lTricore Clone Automatic Function
Added automatism to clone the following control units with OTP zone adaptation and password:
- MED17.5 AUDI
- MED17.5.25 AUDI
- MEVD17.4.2 CITROEN
- EDC17 C08 HYUNDAI
- EDC17 C53 HYUNDAI
- EDC17 C08 KIA
- EDC17 C53 KIA
- EDC17 C66 MERCEDES BENZ
- MEVD17.4.2 PEUGEOT
- MED17.5 SEAT
- MED17.5.25 SEAT
- MED17.5 SKODA
- MED17.5.25 SKODA
- ME17.9.20 SMART
- EDC17 C73 TOYOTA
- MED17.5 VOLKSWAGEN
- MED17.5.25 VOLKSWAGEN

lNew full system for Mercedes truck & CLAAS continental ACM/MCM
Until now, the K-line MCM2 D1/D2 and ACM versions were supported.
Full reading of MCM2.1 D3/D4 and ACM2.1 in CAN line is now also available.

- Reading and writing Micro
- Reading and writing EEPROM
- Recovery
- Checksum

To enable full system communication in D4 hardware versions, it will be necessary to
perform simple unlocking operations with the control unit open by performing bridges on the PCB. At the end it will be possible to close the control unit and read and write all the contents from the pinout.
Follow the instructions in the operating manuals.

lPSA HYBRID4 HV17.4
Bench Mode Per Centraline PSA HYBRID4 HV17.4
Full reading of Citroen/Peugeot HYBRID4 ECUs via pinout added.
The ECU has 2 internal HCUs.
- Reading and writing Micro HCU1 / HCU2
- Reading and writing EEPROM HCU1 / HCU2
- Recovery
- Checksum


lBoot Mode (BAM) for EMS S8 e CRD2
We have added new BOOT MODE (BAM) for complete control unit management on SCANIA:
- CONTINENTAL EMS S8

and new BOOT MODE (BAM) for MERCEDES BENZ / FCA with control units:
- DELPHI CRD2.xx (Versioni SOLENOID e PIEZOTEC)

This makes reading and writing ECU in open mode easier compared to the previous JTAG mode (JTAG function still available). Furthermore, with this method, it's no longer necessary for Delphi CRD2.xx SOLENOIDs to open the ECU from the underside.
- Reading Micro + Eeprom
- Writing Micro + Eeprom
- Recovery
- Checksum


lNew Automatic Function: Tricore Clone
Added automatism to clone the following control units with OTP zone adaptation and password:
- BMW MEVD17.2.8
- BMW MEVD17.2.H
- FIAT DCU17 PC42
- MERCEDES BENZ EDC17 CP10
- MERCEDES DCU17 PC42
- MINI MEVD17.2.8
- MINI MEVD17.2.H
- RENAULT DCU17 PC42
- VOLVO EDC17 CP48

lContinental GPEC2, GPEC3, GPEC4, GPEC4LM !
New BOOT MODE (BAM) for ECUs Continental GPEC fitted on vehicles FCA Fiat, Jeep, Chrysler, Dodge:
- Continental GPEC2A
- Continental GPEC3
- Continental GPEC4
- Continental GPEC4LM
- Reading Micro + Eeprom
- Writing Micro + Eeprom
- Recovery
- Checksum




lCummins CM2200 Dodge Chrysler
Added JTAG MODE for control unit Continental Cummins CM2200 for vehicles Dodge And Chrysler.
- Reading
- Writing
- Recovery
- Checksum


lNew Boot Modes For Delphi DCM7.1 A/B PSA
Boot Mode Solution For Delphi ECU DCM7.1A / DCM7.1B
Added New Boot Mode for micro AURIX TC297 for ECUs DCM7.1A and DCM7.1B mounted on PSA group cars.
- Reading
- Writing
- Recovery
- Checksum


lUpdates for JTAG - Bench - OBD
- New boot via pinout for Mitsubishi Outlander 2.0 Petrol
- Read and write
- Recovery
- Checksum
Added JTAG mode for Adblue ACM Volvo Trucks Euro 6 control unit
- Read
- Writing
- Recovery
- Checksum


Added to the OBD driver for Marelli 9DF FCA also the VIRTUAL reading, in addition to the real reading already present.

lExclusive! - Full System for Marelli 9GF and 8GSW sw version from 2020
- Full System Marelli 9GF for software version from 2020
- Full System Marelli 8GSW for software version from 2020

Added new full system drivers for Marelli 9GF and Marelli 8GSW control units for versions with software update blocked since 2020. On these control units with updated software was no longer allowed the complete reading of micro and eeprom from pinout.

Is now possible: read and write the complete content without opening the control unit.
- Reading and writing Micro
- Reading and writing EEPROM
- Recovery
- Checksum

www.obd2shop.co.uk

Oznake: kt200 ecu progarmmer

utorak, 11.10.2022.

How to choose a suitable Motorcycle Scanner

Choosing a suitable motorcycle scanner generally needs to consider the range of models it covers and the functions it can support.
This article lists 5 Motorcycle Scanners of OBDSTAR for reference.

1. MS80 STD

` Specifications


a Functions and Coverage

MOTORCYCLE/SNOWMOBILE/ATV/UTV DIAG
Asia: AEON, BAJAJ, BENELLI(DSK), DAELIMMOTOR, HARTFORD, HERO, HONDA, HYOSUNG, KAWASAKI, KYMCO, PGO, ROYAL ENFIELD, SUZUKI, SYM, TGB, TVS, YAMAHA

Europe: ADIVA, AJP, APRILIA, BENELLI, BETAMOTOR, BMW, BRIXTON MOTORCYCLE, BROSE, BROUGH SUPERIOR, DERBI, DUCATI, FANTIC MOTOR, FB MONDIAL, GASGAS, GG TECHNIK, GILERA, GOES, HM, HUSABERG, HUSQVARNA, ITALJET, KSR MOTO, KTM, KVN MOTORS, LAMBRETTA, MACBOR, MALAGUTI, MASH, MBK, MGK HM, MH, MINSK, MOTO GUZZI, MOTO MORINI, MV AGUSTA, ORCAL, OVERBIKES, PEUGEOT, PIAGGIO, QOODER, QUADIX, QUADRO, RBS, RIEJU, ROYAL ALLOY, SHERCO, STELS, SWM, TRIUMPH, VERVE MOTO, VESPA, WOTTAN

Americas: ACELLERA, ARCTIC CAT, BRP, BUELL, COLEMAN, CSC MOTORCYCLES, DAFRA, HARLEYDAVIDSON, INDIAN, KELLER, POLARIS, VICTORY

China: ARIIC, BAODIAO, BENDA, CFMOTO, CHINA ABS, CHINA ENGINE, CQZONGSHEN, CYCLONE, DAYANG, DAYUN, DONGFANG, FYM, GAOKIN, GEELY MOTOR, GENERIC, GEON, GUOWEI, HAOJIANG, HAOJUE, HISUN, JINCHENG, JNQQSUZUKI, KEEWAY, KOVE, LIFAN, LONCIN, LONGJIA, QJBENELLI, QJMOTOR, REGAL RAPTOR, RIYA, SHINERAY, SINNIS, TARO, TIANMA, VOGE, WYHONDA, XDZHONDA, ZONTES

IMMO

Europe: APRILIA, BMW, DERBI, DUCATI, GILERA, MOTO GUZZI, PEUGEOT, PIAGGIO, TRIUMPH, VESPA
Americas: BRP, HARLEY-DAVIDSON, INDIAN, POLARIS
Asia: HONDA KAWASAKI SUZUKI YAMAHA

PERSONAL WATERCRAFT(PWC) DIAG
HONDA, KAWASAKI, SEA-DOO(BRP), YAMAHA

ODOMETER RECALIBRATION

Europe: APRILIA, BENELLI, BMW, CAGIVA, DUCATI, GENERIC, KTM, MV AGUSTA, PEUGEOT, PIAGGIO, TRIUMPH

Americas: BUELL, HARLEY-DAVIDSON

Asia: HONDA, KAWASAKI, SUZUKI, YAMAHA

China: HAOJUE, KYMCO

ECU FLASHER

APRILIA, CFMOTO, DERBI, GILERA, MOTO GUZZI, PEUGEOT, PIAGGIO, QJBENELLI, VESPA

TUNING
HONDA

2. MS80 Basic


` Specifications


a Functions and Coverage

MOTORCYCLE/SNOWMOBILE/ATV/UTV DIAG

Asia: AEON, BAJAJ, BENELLI(DSK), DAELIMMOTOR, HARTFORD, HERO, HONDA, HYOSUNG, KAWASAKI, KYMCO, PGO, ROYAL ENFIELD, SUZUKI, SYM, TGB, TVS, YAMAHA

Europe: ADIVA, AJP, APRILIA, BENELLI, BETAMOTOR, BMW, BRIXTON MOTORCYCLES, BROSE, BROUGH SUPERIOR, DERBI, DUCATI, FANTIC MOTOR, FBMONDIAL, GASGAS, GG TECHNIK, GILERA, GOES, HM, HUSABERG, HUSQVARNA, ITALJET, KSR MOTO, KTM, KVN MOTORS, LAMBRETTA, MACBOR, MALAGUTI, MASH, MBK, MGK HM, MH, MINSK, MOTO GUZZI, MOTO MORINI, MV AGUSTA, ORCAL, OVERBIKES, PEUGEOT, PIAGGIO, QOODER, QUADIX, QUADRO, RBS, RIEJU, ROYAL ALLOY, SHERCO, STELS, SWM, TRIUMPH, VERVEMOTO, VESPA, WOTTAN

Americas: ACELLERA, ARCTICAT, BRP, BUELL, COLEMAN, CSC MOTORCYCLES, DAFRA, HARLEY-DAVIDSON, INDIAN, KELLER, POLARIS, VICTORY

China: ARIIC, BAODIAO, BENDA, CFMOTO, CHINA ABS, CHINA ENGINE, CQZONGSHEN, CYCLONE, DAYANG, DAYUN, DONGFANG, FYM, GAOKIN, GEELY MOTOR, GENERIC, GEON, GUOWEI, HAOJIANG, HAOJUE, HISUN, JINCHENG, JNQQSUZUKI, KEEWAY, KOVE, LIFAN, LONCIN, LONGJIA, QJBENELLI, QJMOTOR, REGAL RAPTOR, RIYA, SHINERAY, SINNIS, TARO, TIANMA, VOGE, WYHONDA, XDZHONDA, ZONTES

ODOMETER RECALIBRATION

Europe: APRILIA, BENELLI, BMW, CAGIVA, DUCATI, GENERIC, KTM, MV AGUSTA, PEUGEOT, PIAGGIO, TRIUMPH

Americas: BUELL, HARLEY-DAVIDSON

Asia: HONDA, KAWASAKI, SUZUKI, YAMAHA

China: HAOJUE, KYMCO

3. MS70


` Specifications


a Functions and Coverage

MOTORCYCLE/SNOWMOBILE/ATV/UTV DIAG

Asia: AEON, BAJAJ, HARTFORD, HERO, HONDA, HYOSUNG, KAWASAKI, KYMCO, PGO, ROYAL ENFIELD, SUZUKI, SYM, TVS, YAMAHA

Europe: APRILIA, BENELLI, BMW, DERBI, DUCATI, GILERA, HM, HUSQVARNA, KTM, MOTO GUZZI, PEUGEOT, PIAGGIO, RBS, RIEJU, ROYAL ALLOY, TRIUMPH, VESPA

Americas: ACELLERA, BRP, HARLEY-DAVIDSON, INDIAN

China: CFMOTO, CHINA ABS, CHINA ENGINE, HAOJUE, QJBENELLI, SHINERAY, ZONTES

4. MS50 STD


` Specifications


a Functions and Coverage

MOTORCYCLE/SNOWMOBILE/ATV/UTV DIAG

Asia: AEON, BAJAJ, BENELLI(DSK), HARTFORD, HERO, HONDA, HYOSUNG, KAWASAKI, KYMCO,
PGO, ROYAL ENFIELD, SUZUKI, SYM, TVS, YAMAHA

Europe: APRILIA, BENELLI, HM, HUSQVARNA, KTM, PIAGGIO, ROYAL ALLOY, VESPA

Americas: ACELLERA

China: CHINA ABS, CHINA ENGINE, CFMOTO, HAOJUE, QJBENELLI, SHINERAY, ZONTES

ODOMETER RECALIBRATION

Europe: APRILIA, BENELLI, BMW, CAGIVA, DUCATI, GENERIC, KTM, MV AGUSTA, PEUGEOT, PIAGGIO, TRIUMPH

Americas: BUELL, HARLEY-DAVIDSON

Asia: ACELLERA

China: HAOJUE, KYMCO

TUNING
HONDA

5. MS50 Basic



` Specifications


a Functions and Coverage

MOTORCYCLE/SNOWMOBILE/ATV/UTV DIAG

Asia: AEON, BAJAJ, HARTFORD, HERO, HONDA, KAWASAKI, KYMCO, PGO, ROYAL ENFIELD, SUZUKI, SYM, TVS, YAMAHA

Europe: APRILIA, BENELLI, PIAGGIO, ROYAL ALLOY, VESPA

China: CHINA ABS, CHINA ENGINE

ODOMETER RECALIBRATION

Europe: APRILIA, BENELLI, BMW, CAGIVA, DUCATI, GENERIC, KTM, MV AGUSTA, PEUGEOT, PIAGGIO, TRIUMPH

Americas: BUELL, HARLEY-DAVIDSON

Asia: HONDA, KAWASAKI, SUZUKI, YAMAHA

China: HAOJUE, KYMCO

The difference between them:




In conclusion:

If you want to perform more functions, especially IMMO functions, MS80 STD is your best choice; If you just want to perform some basic functions and odometer recalibration, you can choose MS50 STD or MS50 basic.

https://www.obd2shop.co.uk/

Oznake: obdstar motorcycle tools

ponedjeljak, 10.10.2022.

Yanhua D3 Adjust Benz G Class 2005 400CDI Mileage by OBD?

Can Yanhua Digimaster 3 support do Mercedes Benz G Class 2005 400CDI mileage correction by OBD? The answer is yes. At present, this function is for testing by conner only. The formal issuance will be advised later.

Can I open D3 testing authorization? And how?
1.Provide sales Digimaster III SN on device backside;
2.Update to get the function: Management >> Update






Update: Thanks to obd2shop.co.uk, I can test to do Mercedes odometer correction by OBD.


It tells:  "(7F12)  The subfunction is not supported."

That means OBD method is not supported for this model.

Oznake: yanhua digimaster 3

subota, 08.10.2022.

Yanhua Mini ACDP data export Operation Guide (iOS system)

This article will guide you on how to export Yanhua Mini ACDP data to send to technicians for analysis when you encounter problems.

Step 1. Open the ACDP software and click "Me"
Note: ACDP software version requires 1.9.7 or higher.

Step 2. Select "My File" => "Menu" => "List" => "ATmatch"




Step 3. Click on the symbol on the right side of the folder you need to export, then click "Zip".
Note: Folders must be compressed before they can be exported. The data can be exported directly.


Step 4. Click on the symbol to the right of the zip package, then choose "Share".


Step 5. Select the APP you want to share with, then "Sent to chat" to complete the sending.



For more information about Yanhua ACDP, please follow https://www.obd2shop.co.uk/

Oznake: yanhua mini acdp

petak, 07.10.2022.

How to register and update Autel MaxiTPMS ITS600

This post will show you how to register and update your Autel MaxiTPMS ITS600 Tool.

Let's Start!

Step 1. Connect your device to the network, then follow the prompts to select the Time zone and fill in the workshop information.

Then it will go to do an update on its own since we are connected to the network.

Step 2. Autel MaxiTPMS ITS600 Registration

Once you get to this screen if you already have an Autel ID, go ahead and enter your information.
If you don't have an ID yet, select "Create an Autel ID" and follow the steps to create your account.

After completing the account registration, go back to the current page again to enter your information, and press the "Sign in" button to continue.

This says it accepted the ID but the tool is not registered, so just hit "OK".

It will detect the serial number and the password automatically, and then you just need to press "register" to continue.

Registration was successful!

Step 3. Autel MaxiTPMS ITS600 Update

After completing your registration, go to the current page and select "Update".
iv class="blog-image-gallery">