obd2shop

srijeda, 15.02.2023.

How to Clone Tricore ECU with FoxFlash/KT200 Tool?

FoxFlash & KT200 Programmer can support cloning ECU function as OBDSTAR DC706. This is an introduction on how to clone Tricore ECU with new KT200 software step by step. The procedure may apply to FoxFlash software as well.

Step1. Read ECU data via "BOOT MODE TRICORE" or "BENCH TRICORE" option. Including Micro FLASH, EEPROM data from original ECU & new ECU.

Step2. Select Menu >> Select Drive >> TOOL BOOT >> TOOLS BOOT MODE - INFINEON TRICORE Clone Service >> ECU Model

Step3. Fill 1st option with original ECU Micro file, fill 2nd option with new ECU Micro file.

Step4. Click "CLONE & SAVE" to save new ECU file.

Step5. Select BOOT MODE >> INFINION TRICORE Boot >> ECU Model >> Load new ECU file >> Write to new ECU
* BENCH TRICORE may cause incomplete writing of ECU data(Boot is recommended)

Attention
1. Please write the original EEPROM to new ECU with no changes;
2. Please write Micro FLASH & EEPROM data separately, CANNOT read & write together;
3. If the Micro FLASH data cannot be written, it needs to be processed manually with winols. Or asking help for a professional engineer.
4. Nonsupport VW 5th generation IMMO system.

Technical Support
www.obd2shop.co.uk

Oznake: foxflash ecu programmer, kt200 ecu progarmmer, obdstar dc706

15.02.2023. u 07:05 • 0 Komentara • Print • # • ^

utorak, 14.02.2023.

Introduction to Launch X-431 FIX database function

Recently, Launch X431 PAD VII users reported that an X-431 Fix data function appeared after the software update. What is the X-431 Fix function? How to use it? The following article will introduce this feature in detail for you.

Note: This function is currently only supported by PAD V and PAD VII.

X-431 FIX Database Description:
X-431 FIX maintenance data database function is the collaboration between Launch Comprehensive Diagnostic Equipment and European company HaynesPro® to provide professional guidance on the maintenance of passenger cars, light commercial vehicles, and trucks, and use maintenance technicians to develop a way Quick and accurate vehicle maintenance diagnosis.

X-431 FIX Database Entry:
1. From the home page, select Info Center – Repair Info – X-431 FIX.
2. Enter from Diagnostic Program DTC.
3. Enter the database account and password, you can log in and use it, and you will log in automatically next time.

Acquiring the X-431 FIX database account
The X-431 FIX Database Access Account can be purchased at the X-431 Mall, and the price of the account varies depending on the region where the device is sold. Customers must fill out the receiving information correctly at the time of purchase. Email is the key to sending your account password and will be processed within 7 business days.

Testing the X-431 FIX database
1. Click the [Test] button in the lower right corner of the page and enter the contact email address;

2. Background staff will open a test account within 7 working days and send the test account and X-431 FIX function password by email.
3. The user checks the test account and password in time and logs into the device. After logging in, the account information will be saved automatically, and you can log in automatically within the validity period.

Technical Support
www.obd2shop.co.uk

Oznake: Launch X431

14.02.2023. u 09:58 • 0 Komentara • Print • # • ^

četvrtak, 09.02.2023.

K518 Software update: New Function for AKL of Toyota/Lexus by OBD data back-up

Good news!!! Lonsdor updated the latest software, and the Toyota AKL Online Calculation software license added the OBD function!!!
What does this mean? It means that customers who purchase this software can use this function for free!!

But if you have Lonsdor ADP 8A/4A adapter, you don't need to buy this software license, their functions are the same.

The difference between them:

1. ADP 8A/4A adapter is hardware, and Toyota AKL online calculation is software.

2. Different ways to do Toyota All Key Lost
For K518 + ADP, the smart box needs to be removed, which takes a lot of time and work.
For K518 + Toyota AKL Software, no need to remove the smart box, saving effort and time.
3. Expiration date
ADP can be used for life after purchase (provided the product is not damaged).
Toyota AKL software package is only valid for one year after activation, if you want to continue using it in the second year, you need to reactivate it.

Oznake: lonsdor k518ise

09.02.2023. u 07:01 • 0 Komentara • Print • # • ^

srijeda, 08.02.2023.

How to Upgrade CGDI CG007 Godzilla Key Cutting Machine?

This is CGDI CG007 Godzilla Automatic Key Cutting Machine online upgrade instruction for beginners, including software, firmware, and database upgrade. Remember to check the software version for the first time, cause that may affect the user experience.

WiFi Connection
1. Click the WIFI logo on the "Main Interface" or "Version Update" interface.
2. Follow the prompts to connect to WIFI.

Software Online Upgrade
1. Click "Version Update" on the main interface.
2. If the server version needs to update, the text will turn red. If not, it is the latest version.

3. Click "APP Update >> Yes" in the pop-up dialog box to download and install the latest version.

4. If the update failed and is prompted as below shown "Startup updater error! Maybe the update program does not exist or is broken!", try to update again after restarting.

Firmware Upgrade Online
1. Click "Update Version" on the main interface.
2. If the text turns red, which means to be updated; if not, it's already the latest version.
3. Click "Firmware Update >> Yes" in the pop-up dialog box to download and install the latest version.

Database Online Upgrade
1. Click "Update Version" on the main interface.
2. If the text turns red, which means to be updated; if not, it's already the latest version.
3. Click "Database Update >> Yes" in the pop-up dialog box.
4. Wait for the device's offline data packet download to complete.
5. Click "OK" after the database is updated successfully.

Attached
Maintenance Instructions
The following explains how to maintain CGDI CG007 Godzilla and the necessary precautions.
- Use a soft cloth or a mild glass cleaner to clean the LCD touchscreen.
- Do not use abrasive cleaners or detergents on the touch screen and all parts of the machine.
- Dry your hands before using the screen. If the touch screen times overtime, or if you tap the screen with a wet finger, it may affect the touch sensitivity.
- Keep the key cutting and processing area clean, otherwise, debris and impurities will corrode the machine parts and reduce the accuracy of key processing.
- Do not wash the machine and its components directly with water, and do not use a damp cloth to wipe the machine to prevent the machine from leaking electricity or rusting metal parts.
- Do not drop the equipment or subject it to severe impact.
- Do not replace the battery yourself or use a charger that is not included in the package.

www.obd2shop.co.uk

Oznake: cgdi cg007 godzilla key cutting machine

08.02.2023. u 07:22 • 0 Komentara • Print • # • ^

ponedjeljak, 06.02.2023.

Autel IM608 II vs. Xhorse Key Tool Plus vs. Launch X431 IMMO Pad

As the hot sales in the key programming market, what's different between Autel MaxiIM IM608 II, Xhorse VVDI Key Tool Plus Pad & Launch X431 IMMO Pad? Which tool is better? Reading the comparison table may help you make it clear.

Key Programmer: Autel vs. Xhorse vs. Launch

Conclusion

In terms of price, Autel IM608 Pro2 is the most expensive, Xhorse Key Tool Plus is the cheapest, and X431 IMMO Pad is between them.
In the IMMO function aspect, IM608 Pro2 covers a wider range of models and takes the lead in FCA, Ford, GM, Honda, Hyundai, Kia, and Nissan. Key Tool Plus do better in Mercedes, BMW, VAG, and Toyota. X431 IMMO Pad has an advantage in reading/ writing/ cloning Mercedes, BMW, VAG ECM, and TCM. Besides, both IM608 Pro2 & Key Tool Plus support generating universal keys directly.
As for diagnostic functions, IM608 Pro2 is specialized in coding, guiding, and BMW, Mercedes immo programming. X431 IMMO Pad is comprehensive in read/clear codes and coding. Key Tool Plus does not support it.
In the hardware configuration, IM608 Pro2 is the latest while the all-in-one Key Tool Plus is more portable.
As regards the extended features, X431 IMMO Pad supports more, IM608 Pro2 supports less while Key Tool Plus does not support it.

On the whole, whatever brand has its advantages and disadvantages in different models. All 3 key programmers also have functions that they are better at. Customers can pick one based on budget and car models or features they frequently use.

www.obd2shop.co.uk

Oznake: autel im608 ii

06.02.2023. u 10:38 • 0 Komentara • Print • # • ^

petak, 03.02.2023.

Fixed: Lonsdor KH100+ Can't Identify PH0440B "No chip detected"

Problem: The Lonsdor KH100+ is unable to identify PH0440B Smart Key, it says: "No chip detected, probably it's placed improperly". It keeps failing even I take off its key shell and try different positions.

What should I do, any ideas?

Solution
Try the steps if the indicator can flash when pressing a key button.
1.Try the menu to check if KH100+ can read key info: Special functions >> FT Smart Key >> 8A type >> Get version info;

2.Upgrade Lonsdor KH100 Plus programmer;
3.Upgrade PH0440B key: Special functions >> FT Smart Key >> 8A type >> Upgrade Smart Key

Now you can go back "Identify and copy" menu to try again.
The problem can be solved.

Technical Support
www.obd2shop.co.uk

Oznake: lonsdor kh100+

03.02.2023. u 07:58 • 0 Komentara • Print • # • ^

četvrtak, 02.02.2023.

Hyundai/Kia 95910 N7070 Airbag Reset by OBDSTAR P50

This article will guide you on how to use OBDSTAR P50 to reset Hyundai/Kia airbag 95910 N7070 in bench mode.

The tools we need:
Hyundai/Kia Airbag ECU
P50 tablet
Main Cable
P004 Adapter
CANFD Adapter
P004 Jumper

Select "Airbag Reset" >> "Airbag Reset V30.33" >> "Manual Select Model" >> "HYUNDAI/KIA" >> "Auto Search Part Number", then click "Enter" to continue.

Check the part number on the ECU label
Input the part number of ECU (case insensitive, fuzzy search supported)

After entering the part number, select "Enter" to continue.

Press "ESC" to enter CONFIG mode.

Remarks: click the operation instructions at the bottom left to check the best detection method.

Then choose "Pinout", connecting according to the wiring diagram.

Once the device is connected, click on "ECU Information" to view the relevant information.

Then return to the previous interface and click "Read DTC" to check the error code, there is a crash error code.

Then we choose "Erase Crash", this function is available by connecting the server, please make sure the internet connection is normal.

Erase Crash Success, please disconnect the 12v power supply and wait for 30 seconds, and then reconnect the 12v power supply.

Then return to the previous interface and click "Read DTC" again, the crash history has been erased successfully.

The airbag reset is done!

For more detailed steps, please refer to the video:
https://youtu.be/mO_A-QGWdXY

Oznake: obdstar p50

02.02.2023. u 08:46 • 0 Komentara • Print • # • ^

srijeda, 01.02.2023.

Autel KM100 Program Toyota Yaris 8A All Smart Keys Lost

Autel MaxiIM KM100E IMMO Key Tool can program Toyota Yaris 8A all smart keys lost successfully by OBD. The same operation can be done on Autel IM508, and IM608 Pro key programmers as well. Follow the steps below to learn.

1. Back Up EEPROM
Plug VCI into OBD port:
IMMO >> Toyota >> Manual selection >> Other >> Yaris >> Smart key >> Other >> Yes >> Control unit >> Keyless system(CAN) >> Back up IMMO data

This function is used to backup the EEPROM data of the smart box of the vehicle. The data can be used to generate the simulator key for emergency start of the vehicle to perform the key-matching function.
Press "OK" and wait processing until 100%...
Save EEPROM data file.

2. Generate Key
Generate analog key >> Select EEPROM data
Key type: SLK5, press "OK".

The simulator key is generated successfully.
The simulator key can be used to turn the ignition on in case of emergency and can be used as a registered key to perform "Add key" function.
Note: after the simulator key is successfully generated, the device cannot be used to perform other key operations(such as generating, identifying, copying, etc.). Otherwise, it will be invalid and needs to be regenerated! When using the simulator key, please keep the device antenna close to the key sensing area!
Press "OK".

3. Add Key
Add smart key >> OK
The positions for learning include: 5
Put Autel KM100 close to the START button.
Put a smart key to be learned close to the START button.
Learning succeeded.

Test the key, it can work normally.
Done.