OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

srijeda, 15.02.2023.

How to Clone Tricore ECU with FoxFlash/KT200 Tool?

FoxFlash & KT200 Programmer can support cloning ECU function as OBDSTAR DC706. This is an introduction on how to clone Tricore ECU with new KT200 software step by step. The procedure may apply to FoxFlash software as well.

Step1. Read ECU data via "BOOT MODE TRICORE" or "BENCH TRICORE" option. Including Micro FLASH, EEPROM data from original ECU & new ECU.

Step2. Select Menu >> Select Drive >> TOOL BOOT >> TOOLS BOOT MODE - INFINEON TRICORE Clone Service >> ECU Model









Step3. Fill 1st option with original ECU Micro file, fill 2nd option with new ECU Micro file.




Step4. Click "CLONE & SAVE" to save new ECU file.


Step5. Select BOOT MODE >> INFINION TRICORE Boot >> ECU Model >> Load new ECU file >> Write to new ECU
* BENCH TRICORE may cause incomplete writing of ECU data(Boot is recommended)


Attention
1. Please write the original EEPROM to new ECU with no changes;
2. Please write Micro FLASH & EEPROM data separately, CANNOT read & write together;
3. If the Micro FLASH data cannot be written, it needs to be processed manually with winols. Or asking help for a professional engineer.
4. Nonsupport VW 5th generation IMMO system.

Technical Support
www.obd2shop.co.uk

Oznake: foxflash ecu programmer, kt200 ecu progarmmer, obdstar dc706

15.02.2023. u 07:05 • 0 KomentaraPrint#^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.