obd2shop

četvrtak, 30.06.2022.

Mercedes Benz VGS2-NAG2 Gearbox Refresh with Yanhua Mini ACDP

This article will guide you on how to do a Mercedes Benz VGS2-NAG2 gearbox refresh with Yanhua Mini ACDP and its module 16.

Tools need:
VGS2-NAG2 gearbox
VGS2/3-NAG2 interface board
20PIN cable
OBP+ICP adapter
ACDP host

Step 1. Connect the tools mentioned above.

Correctly connect the interface board to the gearbox interface as shown.

Short the CAN resistor on the OBP + ICP adapter to "CAN-R Join".

Connect ACDP, OBP+ICP adapter, interface board and VGS2-NAG2 gearbox.

Step 2. Perform Benz VGS2-NAG2 Gearbox Refresh

On the Mini ACDP main interface, select "Benz" ’ "Gearbox clone/refresh" ’ "C Class" ’ "VGS2-NAG2" ’ "Refresh", make sure the ACDP device is connected to the gearbox and click to continue.

Check personalized and activated are YES, which means the gearbox has not been refreshed.
Confirm the system information, then click continue.

Follow the instructions to perform the operations, and erase system data finish.

Choose "Identify", make sure the ACDP device is connected to the gearbox and click to continue.
Make sure "Personalized" and "Activated" are "NO", which means the gearbox data has been erased.
Identify system information finish.

Reference video:
https://youtu.be/les9t1Pl4x0

Oznake: yanhua mini acdp

30.06.2022. u 03:20 • 0 Komentara • Print • # • ^

srijeda, 29.06.2022.

OBDSTAR P50 vs. SMOK vs. SMARTOBD vs. GromCalc SRS Tool

What's the most recommended airbag reset tool in 2022? Here Obd2shop.co.uk have picked out 4 brands for comparison, to help customers make a reasonable choice.

OBDSTAR vs. SMOK vs. SMARTOBD vs. GromCalc

Difference
1. Price
OBDSTAR P50 < SMARTOBD < SMOK < GromCalcTool
Among them, OBDSTAR P50 is the cheapest, SMARTOBD is little difference, SMOK is higher, GromCalcTool is the most expensive.

2. Coverage
OBDSTAR P50 = SMARTOBD > GromCalcTool > SMOK
Functionally, they're pretty much the same, but the supported vehicle coverage varies. OBDSTAR & SMARTOBD support more than 4300 models, GromCalcTool takes second place, SMOK supports the least.

3. Convenience
OBDSTAR P50 > SMOK = SMARTOBD = GromCalcTool
Only P50 airbag reset tool is a portable Android tablet while the others should connect to a PC. That means Windows system tool depends on computers, which is better to work in shop. In contrast, OBDSTAR P50 can be used anywhere, easy to take along.

4. Accessory
Only OBDSTAR P50 & GromCalcTool are equipped with a high quality universal jumper. SMARTOBD has a general jumper while SMOK does not provide.

5. Update Frequency
OBDSTAR & SMARTOBD are fast while SMOK & GromCalcTool are slower.

Conclusion
To sum up, OBDSTAR P50 is the most cost-efficient SRS tool. As P50 is newly released, it's more intelligent to have wider vehicle range in functions, supports all OBD or Bench methods to reset airbag. Plus steady updates & reasonable price, P50 wins on cost performance.

SMARTOBD CAN Tool is similar to OBDSTAR P50 in function and price, but differs in operating system. Thus, it's less convenient than P50. Also, it needs to pay for annual subscription fee for use. Otherwise, it won't work. View from this aspect, it's less good-value.

www.obd2shop.co.uk

Oznake: obdstar p50

29.06.2022. u 16:12 • 0 Komentara • Print • # • ^

Free green chiptuning tokens for new PCMtuner users

Good news!!

Now customers who purchase PCMtuner products (a complete set of PCMtuner machines or a single PCMtuner dongle) can get 3 free green tokens (Total value is € 270.00, which can be viewed from the VZ-Performance official website), this promotion is valid until July 20th.

How to get green tokens?

For customers who purchased pcmtuner products during the promotion.

a. After receiving the device, complete the registration process.
b. After completing your registration, log into the VZ performance official website (https://support.vz-performance.com).

c. Create a “general support” ticket to request the recharge as shown in the image below.

What are Green Chiptuning Tokens used for?

GPF/OPF Removal DPF Removal
EGR Removal DTC Removal AdBlue Removal HOT Start Fix IMMO Removal
Readiness Calibration Flaps / Swirl Removal TVA Removal
Sport Displays Calibration Cold Start Noise Reduction Kickdown Deactivation StartStop Disable
MAF Removal
Speed Limiter Removal Torque Monitoring Disable Burbles Activation Popcorn Activation
EVAP Removal Exhaust Flap Removal SAP Removal
AGS Removal BMS/BPCM
Lambda/O2 Removal Launch Control
OBD Reading Protection Boost Sensor Calibration LC, AL and NLS for MED9.1 Checksum Fix
Stage1 Stage2 Stage3

For more information on PCMtuner please contact
https://www.obd2shop.co.uk/

Oznake: pcmtuner

29.06.2022. u 08:46 • 0 Komentara • Print • # • ^

ponedjeljak, 27.06.2022.

Benz ML Series W164 Mileage Correction via Obdstar X300M

Since Obdstar X300M is a good mileage correction tool for modern cars, today I'm gonna show how easy and fast to adjust mileage for a Mercedes Benz. I've disassembled its dashboard from the vehicle and connected it to X300M.

As we can see, the mileage is 210000km now.

Go to: Vehicles >> Cluster Calibrate >> Benz >> Benz V30.35 >> ML series >> W164

Switch ignition on.
Reading mileage...
Current mileage: 210000km, press "ENT".
Input the mileage of the adjustment: 100000km, press "ENT".
Modifying mileage...

Switch ignition off then on.
We can see the mileage has been changed to 10000km.
Mileage adjustment is successful.

This is how to use Obdstar X300M Odometer Correction Tool for a Benz. The procedure may go the same for other vehicles.

Read also:
Mercedes E Class W212 2014 Odometer Adjustment via Obdstar X300M
VW Passat B6/B7/CC Mileage Adjustment via Obdstar X300M
Audi A6 2006 2.7D Mileage Correction via Obdstar X300M

Oznake: obdstar x300m

27.06.2022. u 04:17 • 0 Komentara • Print • # • ^

četvrtak, 23.06.2022.

OBDSTAR P50 Airbag Reset Tool Registration and Upgrade

This post will guide you on how to register and update the OBDSTAR P50 Airbag Reset Tool.

Preparation:
1. Connect the power supply to ensure that the device is in a powered state.
2. Connect to WiFi and make sure the network is connected.

Step 1. Click "DiagProgram" on the main interface, then select "Upgrade".

Step 2. Enter the user login page, and click on "Register" to continue.

Step 3. Fill in the information as required to complete the registration.

Step 4. After successful registration, click "Login Now" to enter the login page, and enter your username and password to complete the login.

Step 5. Select the software to upgrade.

Full operation video:
https://youtu.be/LZ6mlEkvc2o
For more information about OBDSTAR P50, please check https://www.obd2shop.co.uk//obdstar-p50-airbag-rest-pin-code-tablet.html

Oznake: obdstar p50

23.06.2022. u 04:35 • 0 Komentara • Print • # • ^

srijeda, 22.06.2022.

Yanhua Mini ACDP + Module 13 Clone VW Audi VL381(0AW) Gearbox

This is a tutorial on how to use Yanhua Mini ACDP + Module 13 clone Volkswagen/ Audi VL381(0AW) gearbox. Module 13 also supports DQ200(0AM/0CW), DQ250(02E/0D9), DL382(0CK), DL501(0B5) models as well.

Read also:
Yanhua Mini ACDP + Module 13 Clone VW Audi DQ200/250 Gearbox

Check full operations on Youtube:
https://www.youtube.com/watch?v=gegm1lya7ng

Operation Process
To check the connection diagram, please click "Help".
Please make sure the model & SN is correct;

Tool Required:
VL381 gearbox
VL381 interface board
20PIN cable
OBP+ICP adapter
ACDP host

Install the interface board. Short circuit the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN".

Step1. Read & Backup Data
Mini ACDP >> VW >> Gearbox Clone >> Audi >> VL381(0AW) >> Full Backup
1. Please connect ACDP with the gearbox.
2. This function needs to be connected to the Internet. Please make sure the network is good.

Confirm gearbox model, press "Continue".
Read to read chip data, press "OK".
Please save the chip data, press "OK".
*(Please noted the file name contains gearbox model & operation time)

Step2. Write Data
Connect the new VL381(0AW) gearbox.
Full write >> OK >> Continue >> OK >> Load data file
Data written successfully!
Completed.

www.obd2shop.co.uk

Oznake: yanhua mini acdp

22.06.2022. u 10:47 • 0 Komentara • Print • # • ^

ponedjeljak, 20.06.2022.

How to Bind LKE Smart Key Emulator to Lonsdor K518ISE?

This is a quick demo to show how to bind LKE Smart Key Emulator to Lonsdor K518ISE Key Programmer for the first time. Please noted each LKE can only bond to one K518 programmer, it's unable to unbind after binding.

Check operations on Youtube:
https://www.youtube.com/watch?v=QLIyQWIJt88

K518 Path:
Special function >> Simulate chip >> Bind simulate chip >> Bind emulated chip
Please place key emulator into Lonsdor K518ISE card slot.

This LKE is not bound!
Note:
1. Unable to unbind the LKE after binding it completely.
2. One LKE can only be bound to one device.
Continue to generate key emulator, you will need to bind it to this device, please operate with caution!

Whether to bind this LKE to this device host?
If yes, please put the LKE into the card slot, and click "OK" to continue.

Bound successfully!

Now you can start to generate key emulator in Immo & remote.

http://blog.obd2shop.co.uk/how-to-bind-lke-smart-key-emulator-to-lonsdor-k518ise/

Oznake: lonsdor k518ise

20.06.2022. u 14:59 • 0 Komentara • Print • # • ^

nedjelja, 19.06.2022.

(Fixed) PCMtuner unable to use interface J2534: Scanmatik - SM2 USB

Customer Question: When I use the PCMtuner ECU programmer, the device displays "Unable to use the selected interface (J2534: Scanmatik - SM2 USB)" as shown in the picture, what should I do?

OBD2shop.co.uk technician replied: Uninstall the Scanmatik driver in Device Manager, then restart the computer, reinstall the Scanmatik driver and then reconnect the device.

For more information on PCMtuner click on https://www.obd2shop.co.uk//pcmtunner-latest-version-ecu-programming.html

Oznake: pcmtuner

19.06.2022. u 15:54 • 0 Komentara • Print • # • ^

petak, 17.06.2022.

Godiag GT103: Most Cost-Effective Circuit Tester Must Have

Godiag GT103 Electric Circuit Tester is a simplified version of GT101/GT102 that was released recently. What’s the difference between them except appearance? Let’s take a look.

Godiag GT103 vs. GT101 vs. GT102 Comparison

Differences
1. Price
Godiag GT103 < GT102 < GT101
GT103 Mini Pirt is the cheapest.
GT102 places the second.
GT101 is most expensive.

2. Function
Godiag GT103 < GT102 < GT101
GT101 covers all functions of the others.
GT102 cannot display current.
GT103 cannot display voltage & current.

From the table above, GT103 Electric Circuit Tester is higher cost performance. Beyond that, what else it can do?

1. Detect Car Circuit Easily
The traditional multimeter cannot support live line measurement, which may burn out the multimeter. Test lead generally allows only 1.5 meters for 2-hands testing. Outage measurement may damage the car. You’ll have to know where the GND is if judging by voltage… Godiag GT103 can help to avoid all these trouble.

2. Flashlight
Godiag GT103 supports line hunting, short circuit & open circuit to enable you work in the dark. It can light up bulb, steering lamp, stoplight, ambient light, window lift, windscreen wiper, horn…etc.

3. Professional Fuel Injector Cleaning
Godiag GT103 is offering a more secure and efficient way to clean fuel injector. Instead of DIY cleaning way to be more convenient and easier.

4. Professional Relay Test
Godiag GT103 is featured with pluggable probes and holder, easy for connection. Supports line hunting in unstable voltage case to do test.

5. LED Light & Voice Prompt
Simple and easy to understand, be friendly to beginners.

6. Copper 6-Pins Switch
Safe and reliable, convenient to pull or plug. Ensure a stable power supply.

http://blog.obd2shop.co.uk/godiag-gt103-most-cost-effective-circuit-tester-must-have/

Oznake: godiag gt103

17.06.2022. u 04:35 • 0 Komentara • Print • # • ^

četvrtak, 16.06.2022.

Launch X-431 Pad 7 Solved Benz W176 LED Day Light Not Work

Mercedes Benz W176 A class LED day light does not work after LEFT headlamp module replacement. Launch X-431 PAD Series can support to solve the problem, working on tablets like Launch PAD VII, PAD V & IMMO PAD. Following is the detailed solution.

Solution Procedure
Make a full health report and check all DTC at first.
Click "Read fault code".
There's a DTC:
B177655 - Control unit "Actuation module, LED exterior lighting, left front" has a malfunction. The component is not configured.

Special function >> Teach-in processes >> Commissioning of control unit "E1n7"(Actuation module, LED exterior lighting, left front)" >> Continue

Follow the instruction to input string.
Click "Continue".

The coding is being performed, please wait...
Commissioning of control unit "E1n7"(Actuation module, LED exterior lighting, left front)"
- initial startup of the control unit was completed successfully.
Check the following light functions:
- E1e5(Left front turn signal light)
- E1e13(Left parking light, standing light and daytime running light)
Click "Continue".

Go to Clear Fault Code.
Are you sure to clear fault memory? Yes
Clear fault memory completed.

Go back to read fault code again.
There's no DTC.
Problem was solved!

This is how to use Launch X431 Pad 7 to solve the Mercedes LED daylight not working problem.
www.obd2shop.co.uk

Oznake: Launch X431

16.06.2022. u 04:45 • 0 Komentara • Print • # • ^

utorak, 14.06.2022.

OBDSTAR P50 Reset Ford EcoSport Airbag ECU on Bench

OBDSTAR P50 Airbag Reset Tool supports one-click reset for 38 brands and over 3000 ECU part number. Such as Audi, Benz, Jaguar, Land Rover, Porsche, Toyota, VW,etc. This is a guide on how to reset Ford EcoSport Airbag ECU with OBDSTAR P50 on bench.

Tools:
OBDSTAR P50
P004 Jumper
P004 Adapter
Ford EcoSport Airbag ECU
Main Cable

Note: please keep P50 in charging & communication in the whole process.

Identify ECU Model
Airbag reset >> Airbag Reset Newest Version >> Auto Search Part Number
(Can click "Operation Instruction" at bottom to check the best detect way)

This function is available by connecting the server, please ensure the Internet connection is normal.

Please input the part number(case insensitive), support fuzzy search.
(Can check part number on ECU label)
In this case, it's CN15-14B321-BE XC2361A

Connection
Please click "Diagram" at bottom to connect cables.
Please set the resistance switch of P004 adapter to on.
(Different cars are with different airbag ECU, please choose corresponding wiring diagrams)

Connect P004 adapter with main cable & airbag ECU via jumper.
Turn on 120© resistance.
Turn on power button of P004 adapter.

Airbag Reset Steps:
Read DTC >> Backup EEPROM data >> Erase crash >> Erase DTC >> Read DTC

1. Click "Read DTC" to check fault code, there's a crash fault code;
2. Before airbag reset, please read & save EEPROM in advance to avoid data loss by wrong operation;
3. Turn off P004 adapter power supply for 30s, and then turn it on;
4. Choose EEPROM data saved to erase crash data;
5. Click "Start" at bottom to write EEPROM;
6. Turn off P004 adapter power supply for 30s, then turn it on again;
7. Click "Erase DTC" to clear fault code, crash fault code has been erased successfully.

Completed!
www.obd2shop.co.uk

Oznake: obdstar p50

14.06.2022. u 08:23 • 0 Komentara • Print • # • ^

ponedjeljak, 13.06.2022.

How to Read ECU VR Files with PCMtuner ECU Programmer?

Question: Why the V1.26 PCMtuner is unable to read VW VAG:2.0L TDI(EDC17C74) ECU? The read button is gray, what does this mean?

Engineer Replies
This VW ECU needs to read VR files on the VZ-performance server.

How to read VR files?
1. Log in VZ-performance server: https://support.vz-performance.com
2. Search >> Enter part number to search VR files >> Download
3. Go back PCMFlash to load VR files then read.
Done.

Hope this can help.

Technical support
www.obd2shop.co.uk

Oznake: pcmtuner

13.06.2022. u 10:22 • 0 Komentara • Print • # • ^

četvrtak, 09.06.2022.

GODIAG V600-BM firmware update error appears when using the latest software

Customer question: I have a GODIAG V600, today when I use the new BMW ISTA + software version 4.35.20, the Status column shows the firmware and I cannot continue to test.

Solution: You need to set the v600 analog firmware version number. The specific operation steps are as follows:

1. Connect the V600 to the car, connect the computer to the internet cable or wifi (do not connect the network cable and wifi at the same time) and run the client software "STTech.AnyVCI.Updater.exe" (customers who use it for first time you need to register and then log in).
The client download link:
https://mega.nz/file/TFhBWJwT#E2X5Jp4N5XSBCJIhKGOYihpTfkbGPIzz95ZGhPfQxnU

2. After logging in, go to the "Advanced features" menu.

3. Find the FirmwareVersion column, select user-defined, set the Boot, App, and Pck values according to the following figure, and then click Set.

For more information on GODIAG V600, please follow http://blog.obd2shop.co.uk/

Oznake: godiag v600

09.06.2022. u 15:55 • 0 Komentara • Print • # • ^

četvrtak, 02.06.2022.

Lonsdor K518S + LKE Program 2015 Toyota Crown AKL Success

This is a guide to show how to program 2015 Toyota Crown all keys lost successfully with Lonsdor K518 Plus LKE Smart Key. Easy and fast in 4 minutes via OBD.

Connect K518S Key Programmer to OBD,
1. Backup EEPROM Data
Immo & remote >> Toyota >> Select from type >> All smart key lost >> All key lost >> Backup EEPROM Data
1) This function can back up car EPROM data.
2) When backup complete, go to "Make emulator key" to make an emergency emulator key.
3) Use the key to touch the start button to ignition dashboard and add key.
Press "OK".

2. Generate LKE
Select "Generate LKE".

This function can generate an alternate master key when all the key are lost. This key can replace the original working key to turn on the dashboard to add key.

Please place LKE Key Emulator into K518 card slot.

The key emulator(LKE) is already bound to the device, whether to choose the required EEPROM backup file to generate LKE?
OK >> Load data file

Current EPROM info:
Count of keys: 1
Key type: A8

Once the key is generated, put the spare key close to the ignition, turn on the dashboard, and select "Add key" function to program new key.

3. Add New Key
Put an emulator key or workable original key close to the ignition switch, and turn it ON till the dashboard is lit up.

Count of the registered keys:1

Put the back side of the registered key close to the start button, when buzzer rings once, remove the key.
Within 30s to put back of the key(to be registered) close to car start button, when buzzer beeps twice, remove the key.

Operation completed!
Count of the registered keys:2