OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

četvrtak, 29.12.2022.

How to use foxFlash tool to read ECU outdoors

This post will guide you on how to use foxFlash ECU programmer to read ECU when you are away from home.

When using Foxflash to read ECU outdoors, you can use the cigarette lighter to power the device in the car. Use the mobile phone to activate a hotspot to connect your computer to the network.

Here are the steps:

Plug the cigarette lighter into the cigarette lighter socket of the car.


The other end of the cigarette lighter plugs into the Bench device to power it.

Next, turn on your computer.

The software cannot be opened when the computer is not connected to the Internet.

Take out the phone.
Turn on your personal hotspot.
Then use the laptop to find the name of the wifi hotspot turned on by the phone, and enter the hotspot password.

If it shows the connection is successful, you can open the Foxflash software to read the ECU.

You can also click the video below to watch the steps:
https://youtu.be/YevvaqU-NAk

Oznake: foxflash ecu programmer

29.12.2022. u 02:55 • 0 Komentara • Print • # • ^

srijeda, 28.12.2022.

OBDSTAR Added Toyota Lexus 8A 4A Add Key & AKL by OBD

OBDSTAR has released Toyota & Lexus IMMO upgrade V32.74, added new models 8A-A8, 8A-A9, 8A-AA, 4A all series add keys & all keys lost key programming by OBD. Works for OBDSTAR X300 DP PLUS, X300 PRO4. No adapter is required or disassembly supports keys from all manufacturers with free Pincode.


Program 2020 Lexus UX300E 8A-AA Key by OBD
Tools:
Key Master DP Plus
Main cable

Key SIM
CAN Direct Kit

Connect Toyota-27 with smart box, and connect CAN direct with OBD.








Operation:
Car IMMO >> Asia >> Lexus Toyota Scion >> Latest version >> Manual select system >> Proximity >> Type 9(8A-AA) >> Read IMMO data >> Operation in the car(CAN DIRECT KIT)

Please connect the diagnostic device, smart key ecu, and vehicle OBD through the CAN DIRECT KIT.
This function is available by connecting the server, please ensure the Internet connection is normal.
Save immo data file.



Make simulated card(key SIM) >> Enter
1. This function can make a simulated key when all the keys are lost(note: simulated key needs to be kept charged, and it needs to be made again after the power is off);
2. The simulated key can replace the original car key to add keys, erase keys and other operations;
3. Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.
Select the saved file >> Connect Key Sim simulator
Generate simulated card successfully.






Restore smart box cable.
Test the Key Sim close to start button. It can start engine successfully.
Now we can use it as an original key to add more keys.


www.obd2shop.co.uk

Oznake: obdstar x300 dp plus

28.12.2022. u 02:12 • 0 Komentara • Print • # • ^

ponedjeljak, 26.12.2022.

KT200 ECU Programmer Added Offline Workstation USB

KT200 ECU Programmer Master Version has added a new feature to read & write ECU/TCU via OBD/Bench/Boot/BDM/Jtag offline. Without having to connect to the Internet, just plug the KT200 Offline Workstation USB Dongle to realize. This is very useful for outdoor ECU tuning where the Internet is too weak or not.

The black is the U disk. It contains software and installation instruction, which should be installed online before it can work offline. The white is the dongle to activate the first-time running.

Note:
For KT200 Auto Version, users should upgrade to the full version before buying the offline workstation USB.





KT200 Reads JCB EDC17CV44 Offline on Bench
Open KT200 software >> Select Driver >> BENCH MODE >> JCB >> TC1767-JCB >> EDC17 CV44 >> OK >> Connect
Keep ECU power on. Click "OK".
Read All >> Save
Keep ECU power on. Click "OK".
Reading in progress... wait until 100%.
End of read, turn the dashboard off. Click "OK".
Completed.





KT200 Reads Renault SID310 Offline by OBD
Open KT200 software >> Select Driver >> Car obd >> JCB >> Renault >> Master >> 2.3 dCi SID310 "CAN >> OK



KT200 Reads VW EDC 16U31 Offline on Bench
Open KT200 software >> Select Driver >> BENCH MODE >> Volkswagen >> MPC56 3/4 - VAG >> DIESEL EDC16 U31 >> Connect
Keep ECU power ON. Click "OK".
Read All >> Save
Keep ECU power on. Click "OK".
Reading in progress... wait until 100%.
End of read, turn the dashboard off. Click "OK".
Completed.





www.obd2shop.co.uk

Oznake: kt200 ecu progarmmer

26.12.2022. u 02:41 • 0 Komentara • Print • # • ^

petak, 23.12.2022.

(Solution) Confusing characters appear on the screen of Vident V301

Problem: Hi, I have received my Vident V301, but when I turn it on, there are garbled characters on the screen, how can I fix this?



Solution: Download and install "ieasy Installer_VAG301", then install the 1.50 version of the software. The update process takes approximately 25 minutes.

For more technical help, follow http://blog.obd2shop.co.uk/

Oznake: vident ieasy v301, vident v301

23.12.2022. u 07:54 • 0 Komentara • Print • # • ^

srijeda, 21.12.2022.

Lonsdor K518ISE Adds 2017 Toyota RAV4 Hybrid Key, Possible?

Question: Can Lonsdor K518ISE support to add 2017 Toyota RAV4 Hybrid smart key? Can you show me how to do?

Answer
Yes. Lonsdor K518 supported.

Method 1.
Plug ADP 8A/4A Adapter into smart box to backup data, then add smart keys.
Path: Immo & remote >> Toyota >> Select from type >> All smart key lost(2016-) >> 8A



Read also:
Lonsdor K518ISE + ADP Adapter Program 2021 Toyota RAV4 AKL

Method 2.
Generate smart key with Lonsdor FT PCB.
Special functions >> Key settings >> FT smart key >> 8A >> Generate smart key


Either way can do the job.
Good luck.

www.obd2shop.co.uk

Oznake: lonsdor k518ise

21.12.2022. u 08:21 • 0 Komentara • Print • # • ^

ponedjeljak, 19.12.2022.

Solution: Xhorse Condor XC-Mini Plus II "Error Code:56"

Problem: horse Condor XC-Mini Plus II key cutting machine prompts an error code:56 "The cutter is short-circuited, please check the cutter conductivity."

How to solve it? Please help.



Solution
1. Remove those screws to take off Condor XC-MINI 2 scree.




2. Pull out the whole motor case to remove the screws on it.





3. After removing the motor case, the cable-related conductivity will expose. Please check if the cable was damaged.


4. The cable goes through the whole main motor, one side is connected to the LED bar and the other side is connected to the probe case. To remove the cable, we need to remove the cable socket, then pull it out from the bottom LED bar side.

5. Loosen the fixing screws of the conductive wire as shown. Remove the LED lamp cover.


6. Remove the 3 fixing screws, note that there are 3 black plastic parts on the screws, do not lose them.


7. Check if the 4 wires are broken or if the screws are tightened.




Hope this is helpful.
www.obd2shop.co.uk

Oznake: xhorse condor xc mini plus ii

19.12.2022. u 03:17 • 0 Komentara • Print • # • ^

četvrtak, 15.12.2022.

Autel KM100 chip cloning and transponder simulation, what's the difference?

Some customers wonder about the difference between Autel KM100 chip cloning and transponder simulation, we reveal the truth in this article.

1. The list of supported features is different.





2. Performance results are different.

The end result of chip cloning is that the key chip is cloned, which can be directly used as a new key;
The result of the transponder simulation function is that KM100 becomes an analog key, which can be used to start the car (The protruding part in the upper left corner of the KM100 can communicate).

For more technical support about KM100, please follow https://www.obd2shop.co.uk/

Oznake: autel km100

15.12.2022. u 02:27 • 0 Komentara • Print • # • ^

srijeda, 14.12.2022.

FoxFlash Reads VW MED17.5 ECU on Bench

How to use FoxFlash to read ECU? Here's reading VW TC1766 VAG MED17.5 ECU on a bench as a demonstration.

Connection
Connect FoxFlash main unit & bench box via an adapter.
Connect bench box to MED17.5 ECU via colored jumper.
Connect to the computer via a USB cable.
Plug in the power to the bench box.







ECU Reading
Now we can open FoxFlash Software to start reading.
A device serial number prompt appears. Click "Yes" to enter.


Select the corresponding model: "Volkswagen TC1766 VAG MED17.5", and click "Connect".


* Keep ECU power ON.
Turn on the jumper switch according to the prompt.


Click "Read EEPROM".
Save the data file after reading.

End of the reading, turn the dashboard OFF.
Read VW MED17.5 ECU successfully.




www.obd2shop.co.uk

Oznake: foxflash ecu programmer

14.12.2022. u 07:51 • 0 Komentara • Print • # • ^

ponedjeljak, 12.12.2022.

Solved: Yanhua Digimaster 3 (1EOF) Not Find Device Issue

Problem: When I was using Yanhua Digimaster 3 to read the 93C66 chip, the msg was "(1EOF) Not find device". It's a 2013 Camry Hybrid. What's the reason? Please guide me.






Solution
The reason why cause issue is because of the clamp's loose connection.
1. Re-clamp the connection.
2. Or remove the 93C66 chip to solder on the OBP adapter for reading.
The problem can be solved.


www.obd2shop.co.uk

Oznake: yanhua digimaster 3

12.12.2022. u 08:25 • 0 Komentara • Print • # • ^

petak, 09.12.2022.

Nissan Altima 2022 Smart Key Generation by using Autel KM100

This post will guide you on how to use the Autel KM100 key programmer to generate a 2022 Nissan Altima Smart Key when all key lost.

Here are the steps:

1. First select "Univeral Key".


2. Choose the make, model, and year of the vehicle.
Then scroll through the list of available remotes until you find the one that matches the buttons and functions of the original key, and select it.



3. Next, take the remote key and put it in the slot, and select "Generate Universal Key" to continue.

Now we're going to prepare to generate the key.

4. Univeral key generation is completed.

All you have left to do is plug in your VCI and learn it to the vehicle.

For more information on Autel Maxiim KM100, visit www.obd2shop.co.uk

Oznake: autel km100

09.12.2022. u 10:54 • 0 Komentara • Print • # • ^

srijeda, 07.12.2022.

Vident iSmart800 Pro vs. Autel MX808/ MK808/ MK808Z

Vident iSmart800 Pro is a newly launched automotive diagnostic scanner for mechanics or DIYers. Supports all system diagnosis for 100+ car makes and 40+ commonly used services. As a very competitive tool, what's it different from Autel scanners? Let's take a look.

Vident vs. Autel



Differences
1. Price
iSmart800 Pro < MK808/ MK808Z < MX808
- iSmart800 Pro is most affordable.
- iSmart800 Pro supports longer time free update, which may save 6-months cost than Autel.

2. Hardware
MX808/ MK808 < iSmart800 Pro < MK808Z
- MK808Z has the best configuration in processor, system & RAM.
- iSmart800 Pro has the largest ROM & battery capacity.

3. Software
MX808/ MK808 < MK808Z < iSmart800 Pro
- Only iSmart800 Pro supports minority language translation & tablet no power can check car function.
- iSmart800 Pro has the widest car coverage.
- iSmart800 Pro has the most reset maintenance functions.
- iSmart800 Pro supports professional immobilizer & odometer while MX808/MK808/MK808Z support basic function.

Conclusion
To sum up, iSmart800 Pro is the most cost-effective tool to buy. Suitable for car repairing small shop, beginners, mechanics or enthusiasts. It's a good investment that anyone can afford.

However, if you prefer Autel tools with better configuration, then MK808Z is more recommended.

www.obd2shop.co.uk

Oznake: vident ismart800 pro

07.12.2022. u 08:12 • 0 Komentara • Print • # • ^

ponedjeljak, 05.12.2022.

OBDSTAR MT501: Power on Dashboard, ABS, Gear Lever, A/C Panel

OBDSTAR MT501 is an automotive test platform by BENCH, that supports to power on the dashboard, ABS, gear lever, and A/C(air conditioning) panel without CANBUS communication. Covering Audi, BMW, Benz, Dodge, Ford, Jaguar, Lamborghini, Land Rover, Porsche, Rolls-Royce, Volkswagen, Volvo, etc.

How to use the OBDSTAR MT501 Test Platform?
Follow the operation below to learn:
- OBDSTAR MT501 power on Benz W221 dashboard by Bench
Accessories:
Benz W221 dashboard
MT501 Test Platform
Main cable
P004 adapter
P004 jumper



Test platform >> Agree >> Dashboard >> Latest version >> Brand >> Benz >> W221(Chassis) >> Dashboard Benz W221(Chassis)1036906653 >> Pinout









Connect all accessories together according to pinout diagram.
Turn on P004 adapter.
Start >> ON





https://www.youtube.com/watch?v=vDDTN12HXTo

- OBDSTAR MT501 power on Benz 205 dashboard by Bench
Test platform >> Agree >> Dashboard >> Latest version >> Brand >> Benz >> Dashboard Benz 205 A2059000842 >> Pinout
Follow the pinout diagram to connect all together.
Turn on P004 adapter.
Start >> ON
https://www.youtube.com/watch?v=P9W052J38pA

- OBDSTAR MT501 power on Benz W212 dashboard by Bench
Test platform >> Agree >> Dashboard >> Latest version >> Brand >> Benz >> W212(Chassis) >> Dashboard Benz W212(Chassis) A2C53185820 >> Pinout
Follow the pinout diagram to connect all together.
Turn on P004 adapter.
Start >> ON
https://www.youtube.com/watch?v=hvwdifop14A

- OBDSTAR MT501 power on Audi A4L dashboard by Bench
Accessories:
Audi A4L dashboard
MT501 test platform
Main cable
P004 adapter
P004 jumper
Test platform >> Agree >> Dashboard >> Latest version >> Brand >> Audi >> Dashboard Audi A4L(full LCD) 8WD920740A >> Pinout
Follow the pinout diagram to connect all together.
Turn on P004 adapter.
Start >> ON
https://www.youtube.com/watch?v=m-6FzicX9p0

- OBDSTAR MT501 power on Jaguar dashboard by Bench
Accessories:
Jaguar dashboard
MT501 test platform
Main cable
P004 adapter
P004 jumper
Test platform >> Agree >> Dashboard >> Latest version >> Brand >> Jaguar >> Dashboard Jaguar XJ2014 >> Pinout
Follow the pinout diagram to connect all together.
Turn on P004 adapter.
Start >> ON
https://www.youtube.com/watch?v=T0FnusOgmaQ

www.obd2shop.co.uk

Oznake: obdstar mt501

05.12.2022. u 08:44 • 0 Komentara • Print • # • ^

petak, 02.12.2022.

VVDI Key Tool MAX has an error in programming XEDS01EN Super Remote

Customer Problem: When I use the VVDI Key tool max to program XEDS01EN DS Style Super Remote, I get this message:



Solution: Try to update VVDI Key Tool Max to the latest version.

Customer Feedback: It works, thanks!

To learn more about Xhorse Key Tool Max, please follow http://blog.obd2shop.co.uk/

Oznake: vvdi key tool max

02.12.2022. u 03:30 • 0 Komentara • Print • # • ^

<< Prethodni mjesec | Sljedeći mjesec >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.