OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

srijeda, 21.05.2025.

LAUNCH X431 PAD 5 Perform 2017 Mercedes GLS Level Calibration

This is a tutorial on how to perform 2017 Mercedes-Benz GLS Level Calibration with LAUNCH X431 PAD V Elite. The vehicle has just replaced the level sensor and has two DTCs as follows:

U042700 - Impossible data were received from the electronic ignition lock.
C156E00 - Calibration of the vehicle level was not performed.



How to do Mercedes-Benz GLS Level Calibration?
1. Choose [Special Function] of the air suspension system on X431 PAD V Elite, then choose [Teach-in Processes] >> [Level Calibration].






. Turn on the ignition switch and choose OK.


3. The values are not within the standard value range. Wait for the vehicle to adjust within the standard value range automatically. Click [Continue] >> [F3].






4. If there is no measuring tool, select the middle value to enter the left front incline angle, right front incline, left rear incline angle, and right rear incline angle. Click OK.
After confirming that the values are correct, click [Continue] >> [OK] to exit.



5. After successful calibration, click OK.


www.obd2shop.co.uk

Oznake: launch x431 pad v 5

21.05.2025. u 12:06 • 0 KomentaraPrint#^

ponedjeljak, 03.02.2025.

How to do an Actuation Test on Higer with LAUNCH X431 PAD5?

This is a step-by-step tutorial on doing an actuation test with the LAUNCH X431 PAD5 Elite + HD3 Module. Here we're testing on Higer as an example.

Local Dignosis >> Higer >> OK >> Engine System >> BOSCH Identification >> BOSCH System self-identification >> Select the corresponding option: YuChai P1382 EDC17CV44 >> OK >> Actuation Test >> Engine Speed Test









Note: Please check that the following conditions are me
T15 power on.
Vehicle speed is 0.
No relevant fault code exists.
Gear engaged at P or N.
Handbrake applied.
Click "Continue".

Now we can view the dashboard RPM changes.
Click "Open", then "Close".
The operation on X431 PAD V was successful.

The dashboard tachometer is interrupted during the rev test and the actual vehicle will have a noticeable rev boost.





www.obd2shop.co.uk

Oznake: launch x431 pad v 5

03.02.2025. u 03:10 • 0 KomentaraPrint#^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.