obd2shop

srijeda, 23.02.2022.

How to fix data getting error when using Lonsdor LKE key emulator

Customer question: Why do I keep getting the following error message when using the Lonsdor LKE smart key emulator?

The technician replied:

Reinstall the battery and follow the steps below:

Insert the LKE smart key emulator into the K518ISE device card slot,
Select "Special functions" in the device interface

Then, select "Simulate chip" == >> "Obtain LKE data" == >> "Obtain LKE key data"

Downloading application...

Generating...

Then, you will get the following information:

Click "OK" to continue, then click the return sign in the upper right corner of the device to return to the previous interface, select "Generate Simulated Chip" == >> "4D" == >> " 4D chip emulation

Displays the following information:

Click "OK" to continue

Generating...

The function test of the LKE smart key emulator was successful.

The operation of the video is as follows:
https://youtu.be/rbpLHoqOMpk
For additional technical support questions, please contact:
https://www.obd2shop.co.uk/

Oznake: lonsdor, lonsdor k518ise

23.02.2022. u 02:37 • 0 Komentara • Print • # • ^

ponedjeljak, 14.02.2022.

How to use Lonsdor ADP 8A/4A Adapter for 2017+ Toyota/ LEXUS?

Lonsdor Super ADP 8A/4A Adapter can work with K518 Programmer to do backup immo data, add smart key, delete smart key & generate key emulator(4A8A) for 2017+ Toyota/ LEXUS vehicles. Below is the operation guide for reference.

Lonsdor ADP Adapter Backup Immo Data
Backup immo data >> Finish connection as prompted >> Confirm software SN >> Enter file name to save, OK

Immo data backup successfully.

Lonsdor ADP Adapter Generate LKE Key Emulator
Prepare a LKE Smart Key Emulator in advance. Go to
Generate key emulator >> Make sure connection is OK >> Select file
Put the LKE Key Emulator into K518 card slot, click “OK”.
Emergency key generated successfully.
Please use emergency key to turn ignition on, then enter key programming function to program new key.

Lonsdor ADP Adapter Add Key(AKL)
For all keys lost, need to generate LKEKey Emulator as an emergency key firstly; Otherwise, no need.

Add smart key >> Make sure connection is OK
Switch ignition ON.
Confirm software SN.
Turn ignition off, turn on 2 flashing lights.
Load PEPS Dflash file to acquire 12-bit PIN.
OK >> Select Dflash >> Check current key count
Registered keys:2
Registrable keys:5

Finish the following steps within 30s:
1.hold the registered smart key’s back or generated emergency key closer to Start button, the buzzer beeps once, then take the key away from the button.
2.Hold the smart key(to be registered)’s back closer to Start button, the buzzer beeps twice, then take the key away from the button.

Just wait processing...
Operation completed!
Count of the registered keys:3
Count of registrable keys: 4

Switch ignition ON.
Place a programmed key close to start button of vehicle, then you hear one beep.
Programming complete.
Remember to check if the new key is workable.

Lonsdor ADP Adapter Delete Key
Prepare keys to be saved.
Delete smart key >> Make sure connection is OK
Note:
This function is used to delete all absent keys! Keys that do not touch ignition switch will be deleted, and can’t be registered to use.

Switch ignition ON.
Confirm software SN.
Turn ignition off, turn on 2 flashing lights.
Load PEPS Dflash file to acquire 12-bit PIN.
Select Dflash >> OK
1.Keep the keys to be saved close to the ignition switch, beep once.
2.The rest keys without closing to the ignition switch will be deleted.
Wait processing...
Deleting completed.
Count of the registered keys: 2

Buy Lonsdor K518ISE + Super ADP Adapter combination now to get lower price.
www.obd2shop.co.uk

Oznake: lonsdor, lonsdor k518ise

14.02.2022. u 02:39 • 0 Komentara • Print • # • ^

utorak, 18.01.2022.

How to Flash Lonsdor K518ISE to Reboot Device?

How to do in case Lonsdor K518ISE is stuck due to misoperation and cannot force to update? At this time, users may need to flash K518 key programmer to reboot device. If you’re struggling with same problem, feel free to contact Obd2shop online service for the flash package.

How to flash K518 programmer?
1. Download & unzip flash package;
2. Install & open “PhoenixSuit_CN” app;
3. Connect K518ISE with a USB cable;
4. Flash K518ISE: One-click flash >> Load >> Locate “sun8iw5p1_android_dvk3” file;

5. Hold on power button to enter below interface. Click “Reboot” then immediately hold on Volume+ button until coming out a prompt message on computer.
Continuous click “Yes >> Yes” to start update firmware;

6. Pull out USB cable when update completed. Wait K518ISE device to repair automatically;

7. Don’t touch K518 Programmer until showing a white screen with “Set up WIFI”&“Update” buttons;
8. Set up WIFI then update, the problem will be solved after updating.

It may help:
How to do formatting for Lonsdor K518ISE key programmer?
http://blog.obd2shop.co.uk/how-to-do-formatting-for-lonsdor-k518ise-key-programmer/

Oznake: lonsdor, lonsdor k518ise

18.01.2022. u 07:54 • 0 Komentara • Print • # • ^

srijeda, 24.01.2018.

Lonsdor K518ISE Key Programmer New Update – American car models Pontiac-Series 3

Good news! Lonsdor K518ISE American car models Pontiac-Series 3 Update. The following shows more details:

K518ISE Update time: Jan.23, 2018

K518ISE Update details:

PONTIAC Aztec Immobilizer

PONTIAC Bonneville Immobilizer

PONTIAC G3 Immobilizer

PONTIAC G5 Immobilizer

PONTIAC G6 Immobilizer

PONTIAC G8 Immobilizer

PONTIAC Grand Prix Immobilizer

PONTIAC Montana Immobilizer

PONTIAC Pursult Immobilizer

PONTIAC Solstice Immobilizer