obd2shop

ponedjeljak, 14.02.2022.

How to use Lonsdor ADP 8A/4A Adapter for 2017+ Toyota/ LEXUS?

Lonsdor Super ADP 8A/4A Adapter can work with K518 Programmer to do backup immo data, add smart key, delete smart key & generate key emulator(4A8A) for 2017+ Toyota/ LEXUS vehicles. Below is the operation guide for reference.

Lonsdor ADP Adapter Backup Immo Data
Backup immo data >> Finish connection as prompted >> Confirm software SN >> Enter file name to save, OK

Immo data backup successfully.

Lonsdor ADP Adapter Generate LKE Key Emulator
Prepare a LKE Smart Key Emulator in advance. Go to
Generate key emulator >> Make sure connection is OK >> Select file
Put the LKE Key Emulator into K518 card slot, click “OK”.
Emergency key generated successfully.
Please use emergency key to turn ignition on, then enter key programming function to program new key.

Lonsdor ADP Adapter Add Key(AKL)
For all keys lost, need to generate LKEKey Emulator as an emergency key firstly; Otherwise, no need.

Add smart key >> Make sure connection is OK
Switch ignition ON.
Confirm software SN.
Turn ignition off, turn on 2 flashing lights.
Load PEPS Dflash file to acquire 12-bit PIN.
OK >> Select Dflash >> Check current key count
Registered keys:2
Registrable keys:5

Finish the following steps within 30s:
1.hold the registered smart key’s back or generated emergency key closer to Start button, the buzzer beeps once, then take the key away from the button.
2.Hold the smart key(to be registered)’s back closer to Start button, the buzzer beeps twice, then take the key away from the button.

Just wait processing...
Operation completed!
Count of the registered keys:3
Count of registrable keys: 4

Switch ignition ON.
Place a programmed key close to start button of vehicle, then you hear one beep.
Programming complete.
Remember to check if the new key is workable.

Lonsdor ADP Adapter Delete Key
Prepare keys to be saved.
Delete smart key >> Make sure connection is OK
Note:
This function is used to delete all absent keys! Keys that do not touch ignition switch will be deleted, and can’t be registered to use.

Switch ignition ON.
Confirm software SN.
Turn ignition off, turn on 2 flashing lights.
Load PEPS Dflash file to acquire 12-bit PIN.
Select Dflash >> OK
1.Keep the keys to be saved close to the ignition switch, beep once.
2.The rest keys without closing to the ignition switch will be deleted.
Wait processing...
Deleting completed.
Count of the registered keys: 2