OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

srijeda, 25.09.2024.

How to Make an Extension Cable for Godiag GT106 Plus

As we all know, a fuel injector test may require longer wires to assist with the testing. This article will show you how to make an extension cable for the Godiag GT106 Plus power cord.

Tools Required:
1pc x GT106 Plus Power Cord with Fuse
2pcs x Clamps
2pcs x Rubber Protective Cover
1pc x Extension Cable
1pc x Automatische Abisolierzange
1pc x Isolierband

Steps:
1. Use the automatische abisolierzange to peel off one end of the GT106 Plus power cord and the extension cable.


2. Connect the GT106 Plus power cord's red wire and the extension cable's red wire, and then fix them with an isolator band. Both black wires are connected in the same way.



3. Connect the other end of the extension cable to the clip.
First, put on the rubber protective cover, then connect the wire to the clip like this, clamp it, and finally put the rubber protective cover on the clip.





Click on the video below to view the full tutorial:
https://youtu.be/2Gai9PdfZ-U

www.obd2shop.co.uk

Oznake: godiag gt106 plus

25.09.2024. u 11:27 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.