OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

ponedjeljak, 22.04.2024.

OBDSTAR X300 Classic G3 Chery Tiggo 8 Pro Proximity Key Programming

This post will guide you on how to use OBDSTAR X300 Classic G3 to do Chery Tiggo 8 Pro proximity key programming.

The tools we need:
X300 Classic G3
M001 Main Cable
New Key


Procedure:
Connect OBDSTAR X300 Classic G3 to the car through M001 Main Cable
Select [IMMO], enter "Chery" to search, and select [CHERY/COWIN/JETOUR/EXEED]>>[Manual Select Model]>>[TIGGO]>>[TIGGO 8 PRO]>>[PROXIMITY]

Step 1. Read PinCode
Choose [Read PinCode]


Step 2. Program keys
Choose [Program keys]>>[Program new keys]


Information:
If it is a blade key please insert it into the keyhole;
If it is a proximity key. Please put the key to be matched in the sensing area and take the other keys out of the vehicle
The sensing area may be located at:
1. Cup holder (some models require moving the cup holder away)
2. Below the cigarette lighter or USB port
3. Near the gear lever

Put the key matched in the sensing area, and input the PinCode just read.


End of function execution!

The proximity key programming is completed.

Video Guides:
https://youtu.be/QQKbODd79iY

www.obd2shop.co.uk

Oznake: obdstrar x300 classic g3

22.04.2024. u 05:27 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.