OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

nedjelja, 29.01.2023.

Yanhua ACDP + Module 3 Read DME ISN for BMW MEVD172P(N20)

Customer question:
Hi, I use Yanhua Mini ACDP + Module 3 can't read ISN from MEVD172P(N20) F-series controller with (p can) in OBD/CAN mode. What can I do?




Solution:
You need to use BENCH mode to read the ISN for your car.
The following is the operation guide:

1. Select "BMW" >> "DME ISN" >> "BENCH Mode Read/Write DME ISN" >> "BOSCH DME" >> "Fxx" , then select "Help" in N20 (MEVD172P) to connect the device.





2. Please prepare ACDP, OBP+ICP adapter, interface board, and DME.

3. Connect the interface board correctly to the DME interface as shown.

4. Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join".

5. Connect ACDP, OBP+ICP adapter, interface board and DME.

6. After the connection is completed, go back to the previous interface, select N20 (MEVD172P), and follow the prompts to read and write.

For more technical support on Yanhua Mini ACDP, please follow http://blog.obd2shop.co.uk/

Oznake: yanhua mini acdp

29.01.2023. u 08:40 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.