OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

petak, 13.01.2023.

Solved: Super MB Pro M6 + SSD (749/701) Network Problem

Problem: Super MB Pro M6 + V2022.12 WIN10 SSD has met network problem, it gave the error as below:
"Initialisierung des Diagnose-Multiplexers ist fehlgeschlagen.
Mogliche Ursachen:
Die Verbindung zwischen dem Diagnose-Multiplexer und der Diagnosedose ist unterbrochen.
Die Verbindung zwischen dem Diagnose-Multiplexer und dem Diagnosegerat ist unterbrochen.
Die Spannungsversorgung an der Diagnosedose (Klemme 30 und (oder)Klemme 31) ist fehlerhaft.
Hinweis:
Bei Verwendung des SDconnect den Verbindungsstatus uber das Toolkit prufen".

(Initialization of the diagnostic multiplexer is failed.
Possible causes:
The connection between the diagnostic multiplexer and the diagnostic socket is interrupted.
The connection between the diagnostic multiplexer and the diagnostic device is interrupted.
The power supply at the diagnostic socket(terminal 30 and (or) terminal 31) is faulty.
Notice:
The connection status when using the SDconnect check via the toolkit.)


"Due to network problem, no connection to the SDconnect can be established(749)".
"No VCI found.(701)
No SDconnect is selected or the desired SDconnect cannot be selected".



Solution
MB Star Diagnostic Tool needs to revise IP when connecting via network. Please follow the steps below to fix the problem.

Selected "Use the following IP address(S)"
IP Address(I): 172.29.127.113
Subnet mask(U): 255.255.255.0

Technical Support
www.obd2shop.co.uk

Oznake: super mb pro m6

13.01.2023. u 04:41 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.