OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

utorak, 25.02.2025.

OBDSTAR MT203 Geteway Simulation & CAN Drive Function Demo

Today we'll demonstrate the function of OBDSTAR MT203 CAN Driver/Gateway Simulator. OBDSTAR MT203 allows us to diagnose modules individually on a workbench, eliminating the need to connect to the original vehicle gateway or reinstall the module back into the vehicle. It is versatile and can handle multiple ECUs, perform diagnostics, and read fault codes.

Kia Sorento Instrument Gateway Simulation

Connect the power supply and the ECU, and then connect the Bluetooth connector.

There are gateway and CAN drive functions on OBDSTAR MT203.
The gateway function supports automatic scanning of standard CAN and fault-tolerant CAN. But does not support automatic identification of CAN FD. Users can manually select standard CAN, fault-tolerant CAN, CAN FD, etc.

Common baud rates are available for quick selection. If don't have one, the custom baud rates can be set. The diagnostic tool defaults to 500K.

This 2020 Kia Sorento instrument uses the CAN FD protocol.
So find the protocol and select 2M baud rate.
The cycling of the 3 dots indicates a successful simulation.

You can now use diagnostic tools like LAUNCH X431 to read ECU information and fault codes, enabling off-vehicle module diagnostics.








Mitsubishi airbag ECU Gateway Simulation
The Mitsubishi airbag ECU uses fault-tolerant CAN, which can be manually selected or automatically recognized.
Press "ENT" to scan automatically, and the scanned ECU is 83K.
The cycling of the 3 dots indicates a successful simulation.

You can now use the diagnostic tool to diagnose the airbag and read fault codes, etc.

If the automatic identification fails, manually select fault-tolerant CAN and choose from common baud rates.
If don't match, select custom settings while keeping the diagnostic tool at 500K, and setting the ECU to 83K.
Press "ENT" and proceed to read fault codes for module diagnosis.






CAN Drive Function
Besides gateway simulation, there's also a CAN drive function to test common modules like gear lever, radio, air conditioning, and EBA system.

This function works in conjunction with the OBDSTAR app where communication definitions for these modules can be found.



www.obd2shop.co.uk

Oznake: obdstar mt203

25.02.2025. u 07:34 • 0 KomentaraPrint#^

srijeda, 26.06.2024.

OBDSTAR MT203 CAN Driver/Gateway Simulator Is Coming!

Good news! OBDSTAR MT203 CAN Driver/Gateway Simulator will arrive next month and can accept pre-orders now. It's an automotive electronics maintenance and repair tool to support the dash, audio, gear lever, AC panel, and other test functions. It provides CAN driver and gateway simulation functions for multiple vehicles.

OBDSTAR MT203 is a compact device and a good helper for automotive electronics maintenance engineers!



Application
lAutomotive electronic ECU repair(airbag, dash, BCM, and other modules simulation gateway diagnostic test by BENCH)
lAutomotive electronic ECU repair(dash, audio, gear lever, AC panel, and other modules CAN drive test by BENCH)
lE-Car components repair(compressor, DCDC, on-board charger, and other modules simulation gateway diagnostic test by BENCH)

Advanced Functions
lUsing STM32H723 high-performance MCU, fast running speed;
lSupport standard CAN, low speed(fault-tolerant CAN), CANFD protocols;
lAutomatic scanning, manual baud rate selection, custom input baud rate, and other modes to simulate different types of gateways;
lIntegrated design, comes with 120± resistor switch, easy to operate;
lA simple and intuitive menu allows you to master the device operation quickly;
lMini USB upgrade cable directly connected to the PC for one-key upgrade.

Supported Protocol Types/Functions
lGateway Supported Protocols
Standard CAN/Standard CAN
500K/250K
500K/125K
Custom Baud Rate

Standard CAN/CAN FD
500K/5M
500K/2M
Custom Baud Rate

Standard CAN/Tolerant CAN
500K/83.3K
500K/100K
500K/125K
125K/125K
Custom Baud Rate

lCAN Driver-Supported Functions
Supports dash, audio gear lever, AC panel, and other test functions for the below models:
AUDI, FORD, PORSCHE, BENZ, JAGUAR, ROLLS-ROYCE, BMW, LAMBORGHINI, VOLKSWAGEN, DODGE, LAND ROVER, VOLVO...


www.obd2shop.co.uk

Oznake: obdstar mt203

26.06.2024. u 08:41 • 0 KomentaraPrint#^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.