OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

četvrtak, 23.05.2024.

How to install ACDP Module 33 MQB-82 interface board

This post will guide you on how to install the MQB lock fastening (MQB-82) interface board from Yanhua ACDP Module 33.

Here comes the procedure:

1. Push the lock fastening of the interface board to the unlock position.
Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.


2. Find the correct positioning holes of D1, D2, D3 and D4 on the instrument.

3. Place the interface board accurately into the installation area and align the pins with the D1, D2, D3, and D4 positioning holes.

4. Finger-down pressure interface board.
Push the PCB lock buckle to the Locked position to lock the interface board.
The installation is done.

5. Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely aligned with the D1, D2, D3, and D4 positioning holes of the instrument.

Check the video to view the detailed operation:
https://youtu.be/gPqZ3l5emZ0

www.obd2shop.co.uk

Oznake: acdp module 33

23.05.2024. u 03:10 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.