OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

petak, 23.08.2024.

Land Rover Knob Gear Lever Action Test by OBDSTAR MT501

This post will guide you on how to use OBDSTAR MT501 to do Land Rover Knob Gear Lever action test by bench.

Check the video here:
https://youtu.be/r2--QbQl9x8

The Tool we need:
MT501
Main Cable
P004 ECU Clone Jumper
P004 Adapter
Land Rover Gear Lever Control ECU


Procedure:
Choose [Test Platform] >> [GEARLEVER] >> [GEARLEVER V30.15] >> [GEARLEVER LAND ROVER/JAGUAR].


Then click [Start] >> [Guide] in the lower left corner, and carefully read the development background and operation methods.



There are 2 operation methods and here we are using method 2, connecting with the ecu jumper.
We will test the gear lever by plugging and unplugging the jumper from the control power terminals.

Click [Pinout] to check the diagram.
Connect the harness according to the wiring diagram.



The control power is disconnected and turn on the ignition switch of P004.
Click [Start] to test.

Plug in the control power supply.
Test that the lift-up, knob function works properly.
Unplug the control power supply, and the lift-down function works properly.


www.obd2shop.co.uk

Oznake: obdstar mt501

23.08.2024. u 04:19 • 0 KomentaraPrint#^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.