OBD2 tools on OBD2shop.co.uk https://blog.dnevnik.hr/obd2shop

ponedjeljak, 16.10.2023.

Autel CAN FD adapter can expand the support of the CAN FD protocol to specifically support the diagnosis of some new models, such as 2020 GM models.

The CAN FD Adapter must be used with a supported Autel Vehicle Communication interface (VCI) to communicate with applicable vehicles.



IMPORTANT:
1. The CAN FD Adapter is currently compatible with Autel's MaxiFlash Elite J2534-VCI, Wireless Diagnostic Interface, VCI 100, and VCI Mini.
2. Prior to use, update the VCI with the latest firmware.
VCI update please refer to How to update your Autel V200 VCI

There are two connection methods, you can select one based on the type of VCI device you have.

1. MaxiFlash Elite J2534-VCI/Wireless Diagnostic Interface:

` Connect the main cable's female adapter to the Vehicle Data Connector on the VCI unit, and tighten the captive (thumb) screws.
a Connect the CAN FD adapter's 16-pin female connector to the main cable's male adapter.
b Connect the attached CAN FD adapter to the vehicle's DLC, which is generally located under the vehicle dashboard.

2. VCI 100/VCI Mini:

` Connect the CAN FD adapter's 16-pin female connector to the Vehicle Data Connector on the VCI unit.
a Connect the attached CAN FD adapter to the vehicle's DLC, which is generally located under the vehicle dashboard.

www.obd2shop.co.uk

Oznake: autel adapter

16.10.2023. u 03:33 • 0 Komentara • Print • # • ^

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.