As you can see, the cylinder is really easy to pop out: 87358, so I don't have to decode them. Next, I'm gonna use Xhorse Dolphin XP005 + Key Tool Max Pro to cut a Toyota TOY40 emergency key by this code. Let's see what will happen.

Cut by bitting >> Toyota >> 87358 >> OK
Install the key blank on M5 clamp B side 2 position as prompted.
The key bitting codes are 4113 and 1412.
Just write them down.
Cut key >> Continue
The Dolphin XP005 failed with an error code: 2, "Not detected probe".
It was asked to do the following steps:
1. Check the clamp is correct.
2. Check height level adjustment finished.
3. Check clamp calibration finished.
4. Check the key insert properly, no chips.

This didn't used to happen. I think this is a result of maybe an update. Remember to keep your Key Tool Max Pro updated to fix the bug.





Let's leave it alone and try another way:
Vehicle database >> Toyota >> TOY40, 4-bittings >> OK >> Enter bitting codes: 4113, 1412 >> Cut key >> Continue
Xhorse Dolphin can complete the cutting this time.

Take out the key to have a test.
It does work.
Done.



www.xhorse.co.uk

Oznake: vvdi key tool max, xhorse dolphin xp005

Problem: The date on the Xhorse Condor XC-Mini Plus key cutting machine will recover automatically after the restart, even if I had set the date before.

What should I do? Please help.

Solution
The reason for this problem is because of the dead battery on the mainboard. Only to remove the shell of the machine and replace a new CR1220 battery into the mainboard. The problem will not recur.

Thanks to www.xhorse.co.uk, the problem was solved.

Technical Support
Email: sales01@xhorse.co.uk
Skype: service@xhorse.co.uk
Whatsapp: +86-15696171957

Oznake: xhorse condor xc mini plus

Recently, Xhorse released the VVDI Key Tool Plus VA version. What is the difference between this and the original Key Tool Plus? Read on and find out more.

The Key Tool Plus VA version focuses on VAG. Supports VAG brands such as Volkswagen, Audi, Porsche, etc. and also supports other brands like Toyota, Honda, Ford, Buick, Chevrolet, etc.

www.xhorse.co.uk

Oznake: vvdi kry tool plus va version

Customer problem: When I try to start any part of the VVDI2 programs it keeps saying "Error - Can't find VVDI2, Reconnect VVDI2 and try again", what should I do?

Solution: Update VVDI2 software and firmware versions to the latest version.
VVDI2 V7.3.5 software download
VVDI2 firmware upgrade via Xhorse upgrade kit

Customer feedback: It works well, thanks!

www.xhorse.co.uk

Oznake: Xhorse VVDI2

Xhorse VVDI Key Tool Plus is able to program a new key for the 2017 Jeep Compass via OBD quickly in 5 minutes. Here I have a working key and XM38 Universal Key to show you as follow:

Generate Remote
Put the new key into the Key Tool Plus coil.
Remote program >> Jeep >> All remote >> Compass(2017+) KeylessGo ID4A >> Generate
Writing data...
Burn success.

Add Key
IMMO programming >> Jeep >> Sort by area >> Asia >> Compass >> 2017-2020 >> Keyless Go >> Program smart key
Switch the ignition off, and turn on the security warning light(double flashlights).
Please make sure there are no wireless devices near the smart key.
Please input a 5-digit password.

Within 60s, approach the Universal Smart Key that needs to be matched to the central console(or start button), then press and release the unlock button of the key once, wait for 5s, and do not press any button during this period.
Note: The new key must be the original key of the current model, otherwise it may fail.

Current number of keys: 3
Match successfully.
Program completed!

Test the new key, it can work well.
Done.







www.xhorse.co.uk

Oznake: vvdi key tool plus

Today we're gonna be introducing a new device - Xhorse VVDI BEE Key Tool Lite. Next, let's take a look at this package and make an unboxing review.

What's in Xhorse Key Tool Lite Package?

An instruction manual in English that gives a brief description of how to use the device.
VVDI Key Tool Lite.
1 programming cable and 6 wired remotes as gifts.
(Please notice the gifts are limited, first come first served.)

Appearance & Function Review
Key Tool Lite is very small and compact, its weight is only 33.4g.


The coil is used to read transponder and remote data, detect remote frequency, and collect transponder data. It supports frequencies of 125KHz and 134KHz.
1. Remote frequency detection
2. Chip clone collection
3. Chip and remote reading coil 125KGz 134KHz

The area below is used to identify the IC card. And there's a working status indicator.
- If it is on, the device is in working mode.
- A flashing light indicates that the device is upgrading.


This side port is used to connect the programming cable.

Xhorse Key Tool Lite is a wired device. The cable features a TYPE-C interface and CAN only be connected to Android phones with the OTG function. The iPhones are not supported. If your phone is not equipped with a TYPE-C interface, you'll need an adapter with an OTG sign.

Next, we'll try to connect Key Tool Lite to the phone.

How to Connect to a Phone?
1. Plug in the cable to a phone.
2. Tap "OK" when asking for access.
3. Tap "Connect" to connect the device.
Now we can start to work, no more worrying about the battery.


Connection Tips
If your phone pops up such a dialog box: "Device connect failed, please confirm that the device is connected, and check whether the mobile phone supports OTG and is turned on."

Please follow the prompts to turn on the OTG function. If you're not sure if your phone supports OTG function, try to search online to figure it out.

After work, remember to unplug the cable to turn off the device.
Okay, that wraps up the unboxing review.

www.xhorse.co.uk

Oznake: vvdi bee key tool lite