Xhorse VVDI Key Tool Plus Pad can add a smart key for 2014-2016 Hyundai Xcent via reading password successfully. Free charge, easy operation by OBD. The whole process only took 4 minutes with 2 steps. Next, let’s take a look at how it works.

Operation Procedure
Step1. Read Password
Insert VVDI Key Tool Plus cable into OBD,
Immo programming >> Asia >> Hyundai >> Read PIN code >> Password reading(47 PROX-remote) >> Start programming >> Read PIN code

Please connect to the Internet before performing this function.

1.If there is an ignition key, please switch ignition off then switch on.
2.If all keys are lost, please turn on double flash lamps, and close driver door once.
Press “OK”.

Reading the password, it takes some time, please wait...
Switch ignition off.
Passwords have been read out: 715786.
Click OK, switch ignition again.

Step2. Program Smart Key
Go back to
Hyundai >> Select by model >> General market >> Grand i10/Xcent(BA) >> 2014-2016 >> Smart key programming >> Start programming >> Smart keys programming

All smart keys need to match, the smart key that has not been matched will not be able to start the vehicle.

Enter the password, press “OK”.
Press once START button.
Turn off ignition switch, open then close driver door once.

Start to program keys after press “OK”.
Click START button within 5s by smart key.
Note: the original key is attached to START button vertically, some non-original keys need to be attached to START button with the back of the key or remove the shell.

Smart key has programmed successfully.
Press “Yes” to go on next key, otherwise press “No”.
Operation completed!

Let’s test the keys.
All are workable, done.


This is how to use VVDI Key Tool Plus Key Programmer to add a 2014-2016 Hyundai Xcent key successfully.
www.xhorse.co.uk

Oznake: vvdi key tool plus

Instead of putting the key on Dolphin XP-005 clamp to decode before cutting, this time I’ll use new tool Xhorse XDKR00GL Key Reader for a test. The Dolphin probes usually scan the key and sometimes break so that I have to order a whole bunch. It’s said Key Reader can avoid the problem. However, I’d like to try if it’s as amazing as it says.

Since the Xhorse devices all work in tandem, let’s make a review with several key blades right now.

Review1: Decode Honda HON58R OK
Path on VVDI Key Tool Max:
Optical identification >> Acura >> TL >> HON58R >> OK
Put the Honda key into blade skimmer key slot.
Identification >> Identification
Reading successful.
Key cutting codes are 41335351. That’s you’ll need to cut for a new one.
Accurate and fast.






Review2: Decode BMW HU92R OK
Go back to test another key.
Optical identification >> BMW >> 335 >> HU92R >> OK
Put the BMW key into key reader slot.
Identification >> Identification
Decoded it successfully.
Key codes: 23124224
It’s good and accurate again.


Review3: Decode Honda HON66 OK
Go on to try another key blade.
Optical identification >> Acura >> TL >> HON66 >> OK
Put the HON66 into Xhorse Blade Skimmer.
Identification >> Identification
Identifying successful.
It gives all the key cutting codes: 335551, 431131.
That’s it, simple & all correct.


Review4: Decode Mercedes HU64-2 OK
This is the last Mercedes key to test.
Optical identification >> Mercedes >> all key blank >> HU64-2 >> OK
Put the key into key reader slot for reading.
It reads successfully again.
Bitting codes: 1231355313
All correct again.


It’s quite easy to finish. Literally about 8s to get the key cutting codes. I don’t have to break Dolphin tracing probes anymore. Besides, there’s a Cut button to control key cutting machine directly. That means Key Reader has sent bitting info to Dolphin for direct cutting. At this point, it can work perfectly with Xhorse key cutting machine.

Xhorse Key Reader Reviews for more key types to be updated.
www.xhorse.co.uk

Oznake: xhorse condor xc mini plus ii

Xhorse Dolphin II XP005L can support to cut 2012 Ford Focus HU101 all keys lost successfully. It’s a blade key. Having decoded its lock to get key code, let’s do it with all key lost function.
Key code: 11067

Press on touch screen:
All key lost >> Ford >> Enter key code: 11067 >> HU101

Install the key blank on M5 clamp side A, tip align 5th position.
OK >> Cut key
Dolphin 2 will start up processing the first side of the key.
Just wait until cutting finished.

Go ahead and get the chips off.
Then flip it to cut the second side.






Cutting completed.
Take out the key to have a try.
It can open the lock and work perfectly.


This is how to use Dolphin XP005L automatic machine to cut a HU101 key when all keys lost. For more key cutting machines, welcome to check on www.xhorse.co.uk

Oznake: dolphin xp005l

Xhorse VVDI Key Tool Max Progammer is supported to add a key for 2008 Chevrolet Captiva by cloning transponder 46. Simple operation, finish in 2 minutes. Only to have the original working key & a new remote.

Procedure
Put the original key into VVDI Key Tool Max slot.
Transponder clone >> Read transponder
It’s an cloneable ID46 key.


Clone >> Start clone >> 46 Transponder clone >> Original key clone

Place Xhorse Key Tool Max nearby vehicle coil, turn ignition on for data collecting...
Put the original key back to Key Tool Max slot again.

The password verification succeeds and the decryption succeeds.

Take out original key, and put into a new wireless remote(or VVDI Super Chip).
Copy successfully.








Try the new key, it can start the vehicle.
Key clone was successful.
Done.


This is how to add a new key for 2008 Chevy Captiva via Xhorse Key Tool Max. You may also like:

How to Read Hyundai/Kia ID46 Pin Code by VVDI Key Tool Max?
http://blog.xhorse.co.uk/how-to-read-hyundai-kia-id46-pin-code-by-vvdi-key-tool-max/

Oznake: vvdi key tool max

The answer is yes. Xhorse VVDI Audi BCM2 Solder Free Adapter can read VW Audi locked BCM2 data as long as having the corresponding model. It supports 2013-2019 Audi A4L, A5, Q5, A6L, A7, A8. Here we’re taking about how to use VVDI PROG + Audi Solder-Free Adapter to judge whether BCM module is locked.

Locksmiths should have ever met locked or unlocked VW AUDI BCM modules at work. Basically, cars before 2013 are unlocked while cars after 2013 are locked. But in most cases, the 2013 Audi is indistinguishable.

How to judge AUDI BCM is locked or not?
1.Check the SN on BCM module after disassembly.

2.Connect VVDI PROG, Audi Solder Free Adapter & BCM module. Check VVDI PROG if there’s same SN in locked options(LOCK-BCM2-1 ADAPTER/ LOCK-BCM2-2 ADAPTER)


3.If has, the BCM is locked. We can only use the VVDI AUDI BCM2 Adapter to read.


4.if not, we have to dismantle BCM module to find out CPU model(eg. CPU model is 3634).


5.Check VVDI PROG if there’s same CPU model in unlocked options. If yes, the BCM is unlocked. We can either use Solder-free Adapter or wiring method to read it.


6.If not, the BCM is unknown. DO NOT try to read it at will. It’s suggested to ask for manufacturer. Misoperation may cause data loss and cannot be recovered.

* BCM2 Adapter connection instruction please refer to
VVDI PROG + VVDI2: http://blog.xhorse.co.uk/audi-bcm2-adapter-with-vvdi-2-vvdi-prog/

Conclusion
For BCM that cannot distinguish whether it’s locked, we can judge from SN, then CPU number. For BCM that are unknown, don’t try to do to avoid possible risks.

Technical support
www.xhorse.co.uk

Oznake: audi bcm2 adapter

As the latest Xhorse Key Cutting Machines in 2022, how do we know the differences between Dolphin II & Condor II? That’s the topic we’re gonna talk about. Let’s move forward.

Dolphin 2 vs. Condor 2 Comparison

Differences
1.Price
Dolphin XP005L is cheaper than XC Mini Plus 2.
2.Hardware
Dolphin XP005L is smaller, lighter and standard equipped with only one M5 clamp;
XC Mini Plus 2 has a larger touch screen & 8-core processor for higher running speed. Besides, it’s equipped with 2 standard clamp: M5 & M3, which is one more than Dolphin 2.
3.Functions
XC Mini Plus 2 added key blank engraving & key 3D preview functions while Dolphin XP005L does not.

Similarities
1.Both added a 2-in-1 M5 clamp to instead of M1&M2 clamp, which is more convenient than other machines.
2.Both support M1/M2/M3/M4/M5 clamps for same key types: 2 track external, channel track, standard single sided, 4 track external, 4 track internal, standard double sided, Ford F201, Citroen SX9 & residential keys.
3.Both added the 3-colors indicator lights to show working status that the previous machines do not.
4.Both support online update via WiFi directly, no need PC or Upgrade Kit any more.
5.Both can work with new Key Reader for key bitting recognition.
6.Both share Xhorse powerful key database.
7.Both have all key lost solution including key duplication, cut by bitting, find bitting, customize key data, take photo to recognize bitting, etc.
8.Both support offline operation.
9.Both have a built-in battery & high resolution touch screen.

Summary
On the whole, Dolphin 2 XP005L & Condor MINI Plus 2 have similar key cutting functions. However, Dolphin 2 XP005L is much compact and easy to carry while Condor MINI Plus 2 is more suitable to place in workshop.
Condor MINI Plus 2 is smarter & faster for running, its larger & heavier structure gives more stability. In addition to this, it has 2 standard clamps and some other functions that XP005L does not have. That’s the reason for its price.

So, do you know what features you’ll need? Make decisions and follow your heart.
http://blog.xhorse.co.uk/comparison-xhorse-dolphin-ii-vs-condor-xc-mini-plus-ii/

Oznake: xhorse, xhorse condor xc mini plus ii, xhorse dolphin xp005l

This is an initial guide of Xhorse Dolphin II XP005L to solved the frequent questions from new users. Including Xhorse account activation, firmware & database upgrade, probe & cutter installation, key placement position.

How to activate Dolphin II XP005L?
1.Turn power on. Select language >> Start to activate >> Agree to enter >> Connect to WiFi, next.
2.Download Xhorse app on a phone firstly, then scan the QR code and press “Activate” to combine device. (You’ll receive a security code, just fill in)

Activated successfully.
Now you’re ready to start to use.

How to update Dolphin II firmware & database?
Enter into “System >> Update Center >> Firmware Update/ Database Update >> Update”.
(Red dots on left mean latest software is available).

Make sure the Internet is well.
Just wait it processing until completed...

All can be done on Dolphin Key Cutting Machine, no need a PC any more.








How to install Dolphin II probe & cutter?
lInstall Probes
Loosen the screw on flat spot, put in a probe & tighten screw meanwhile. Once the probe does not rotate that means done. Make sure 2 probes are installed.




lInstall M5 Clamp
Push M5 clamp from right to left along the platform, rotate the handle to fix it.

Note: Please perform clamp & cutting calibration after installation.


How to correctly place a key on M5 clamp?
1.Pay attention to place the key on upper stair, DO NOT place into the bottom groove.
2.Rotate the handle to fix it on. (The key CAN’T be fixed if putting in wrong bottom groove position).


www.xhorse.co.uk

Oznake: xhorse dolphin xp005l

Xhorse new function upgrade for free, to repair Porsche 12V lithium battery issue. Latest version is available on VVDI PROG, VVDI Key Tool Plus & MINI PROG. Support Porsche car models produced from 2018-2020, help users to save lot of money.

Supported Software Version
VVDI PROG Software Version 5.1.2
v5.1.2 (2022.02.24)
* This version DON't need update firmware
Add GAYENNE AC MOUDLE, LITHIUM BATTERY MODULE options in <8-OTHER>->

Key Tool Plus Database Version:
GL: 55
Malaysia: 41
China: 73

MINI PROG Database Version
GL: 49
Malaysia: 35
China: 66

(Data and detailed diagram can be found in the built-in database)

Make sure your Xhorse software is up to date to acquire new features.
www.xhorse.co.uk

Oznake: xhorse

This is a guide to show how to perform Xhorse Condor XC-Mini Plus X axis, Y axis, Z axis & main axis motor measurement test. It’s very important to do measurement test before cutting, which will affect the accuracy of machine when cutting keys.

Condor MINI Plus X Axis Motor Measurement
Tab on screen:
Self Test >> Motor Measurement >> X-axis
The motor will start running along X-axis automatically...

Check whether the motor moves in a smooth and controlled manner, there’s not errors showing on screen. Once finished exit to end test.

Condor MINI Plus Y Axis Motor Measurement
Tab on tablet screen:
Self Test >> Motor Measurement >> Y-axis
The motor will start running along Y-axis automatically...

During the process, check whether the motor moves in a smooth and controlled manner, there’s not errors showing on screen.
Wait until finished.




Condor MINI Plus Z Axis Motor Measurement
Tab on touch screen:
Self Test >> Motor Measurement >> Z-axis
The motor will start running along Z-axis automatically...

Pay attention to confirm if the motor moves in a smooth and controlled manner, there’s not errors showing on screen.
Wait until the process finished.




Condor MINI Plus Main Axis Motor Measurement
Tab on screen:
Self Test >> Motor Measurement >> Main-axis
The main motor will rotate automatically...

Make sure whether the motor rotates in a smooth and controlled manner, and it has no errors showing on screen.
Wait until completed.
Done.




This is how to do Condor XC-Mini self test with X/Y/Z/main axis.
www.xhorse.co.uk

Oznake: xhorse, condor xc mini plus