Problem: The Xhorse Dolphin XP005L key cutting machine was failed to initialize. It gave me 2 error codes as below:
"ERROR CODE: 80, Device initialize error."
"ERROR CODE: 84, Z axis step motor initialize exception"

What's going on? Please help.

Solution
Methods 1. Re-upgrade the machine.
Methods 2. Use the mobile hotspot to try.
Methods 3. If the above two methods don't fix the problem, you can only replace the PCB board.
Note: You can see the PCB board by taking apart the device casing. Before replacement, you can take a picture, then refer to the picture to change the plugs one by one.

Technical support
www.xhorse.co.uk

Oznake: dolphin xp005l

Xhorse Dolphin II XP005L can support to cut 2012 Ford Focus HU101 all keys lost successfully. It’s a blade key. Having decoded its lock to get key code, let’s do it with all key lost function.
Key code: 11067

Press on touch screen:
All key lost >> Ford >> Enter key code: 11067 >> HU101

Install the key blank on M5 clamp side A, tip align 5th position.
OK >> Cut key
Dolphin 2 will start up processing the first side of the key.
Just wait until cutting finished.

Go ahead and get the chips off.
Then flip it to cut the second side.






Cutting completed.
Take out the key to have a try.
It can open the lock and work perfectly.


This is how to use Dolphin XP005L automatic machine to cut a HU101 key when all keys lost. For more key cutting machines, welcome to check on www.xhorse.co.uk

Oznake: dolphin xp005l