This article will guide you on how to use Xhorse M5 Clamp A-side and B-side to cut keys.

If you want to know the functions and highlights of the M5 clamp, please click the link below:
http://blog.xhorse.co.uk/xhorse-m5-clamp-a-clamp-worthy-of-you/

M5 clamp side A

This part will show you how to use the M5 clamp side A and cut the double-sided key CY24.
Enter "Cut by Bitting">>select the CY24 key

Follow the on-screen instructions and install the key blank.
Enter the key code, tap "Cut key"

Start cutting...

After cutting, clean up the clamp, take out the key
Now, we have got a CY24 key.

M5 clamp side B

This part will show you how to use the M5 clamp side B and cut the 4-track internal key HU100
Loosen the knob and rotate the clamp from side A to side B.
Tighten the knob.

Enter "Cut by Bitting">>select the HU100 key

Follow the on-screen instructions and install the key blank.
Enter the key code, tap the "Cut key", and start cutting...


Now the cutting of one side of the key is completed.

Turn the key over, clamp it again, and cut the other side.

Cutting is completed, clean up the clamp, take out the key
Now we have got a HU100 key.

www.xhorse.co.uk

Oznake: xhorse m5 clamp

A few days ago, Xhorse updated the compatibility of the M5 Clamp and further increased the model support. The current M5 has the following highlights:

1. It is compatible with these automatic key-cutting machines from Xhorse.

2. Perfectly integrates the functions of M1 and M2 clamps.

3. It supports the following key types: double-sided key, single-sided key, 4-track external, 2-track external, 4-track internal, and channel track, and it can also handle dimple key cutting when used with Condor XC Mini Plus II.

When the clamp is on side A, it can be used to clamp the following keys:
2 track external, 4 track external, Double sided key, Dimple key.

When the clamp is on side B, it can be used to clamp the following keys:
Channel track, 4 track internal, HU162T.

4. The thin, narrow, and short keys, as well as the special HU162T keys, are perfectly supported by the M5 clamp.
5. It does not require an auxiliary key blank to clamp HU162T keys or elevate the key blank when cutting a Toyota single-sided key.
6. Additionally, the M5 clamp is designed to offer a non-calibrating using experience, which means you don't need to calibrate the clamp anymore while working.

Click the link below to own your M5 clamp immediately: https://www.xhorse.co.uk//xhorse-m5-clamp.html

Oznake: xhorse m5 clamp