This post will guide you on cutting a dimple key using the Xhorse Condor XC 002 PRO Mechanical Key Cutting Machine.

Click on the video to view the full operation:
https://youtu.be/8zRszvxmw5A

Here are the steps:

1. Insert the dimple probe and cutter (internal).
2. Insert the original key and the blank key using a shim.
3. Rotate the knob to standard mode.




4. Press down the handle and finish the calibration.
Just follow the direction of the light and rotate the micro-adjust knob until the middle light turns green.
Make sure that the clamp is in the corresponding position.



5. Duplicate the key.
Turn on the cutter switch and press down the main handle to duplicate the key.
Turn off the switch after finishing one side cutting.
Flip the key and continue to cut the other side.
After finishing one side, turn off the switch and clean up.



6. Insert the dimple probe and cutter (external).
Replace the internal dimple probe and cutter with external ones.


7. Switch the knob to dimple mode.


8. Insert the keys
9. Finish the calibration.
Clamp the keys and don't forget to complete the calibration.


10. Duplicate the key.
Turn on the switch to cut the key.
After finishing one side, turn off the switch and clean up.
Flip the key and cut the other side.
Done!



It works perfectly.

www.xhorse.co.uk

Oznake: condor xc002 pro

Good news! The 2024 latest Xhorse MLB Tool can accept pre-order now. It's a pro tool for MLB vehicles in reading, writing, and calculating. No points are required when using the VVDI MLB specialized key.

Note:
1. Need to work with VVDI2 or Key Tool Plus when learning MLB keys.
2. Need to open MQB & Audi 5th generation IMMO authorization.
3. Applicable to original key & Xhorse MLB key.

Features
lExcel in Key Adding for MLB Models
Support adding keys for Audi, Porsche, Volkswagen, Lamborghini, Bentley, and other MLB vehicle models.

lNo Need to Remove The Chip
Key data calculation requires only the disassembly of the key shell with no need to remove the chip.
Integrated with a 22k reader, it enables wireless key reading and writing without shell removal.

lWireless Key Generation for Ultimate Convenience
Generate original dealership keys and Xhorse specialized keys wirelessly.

lImmo Detection Made Easy
Built-in immo detection module supports wireless key recognition.

lCompatibility with Original Keys and Xhorse Specialized Keys
Support brand-new original keys(uninitialized/initialized) and can verify the status of the original keys.
Support VVDI MLB specialized keys for unlimited reuse.

lRewrite Uninitialized Key IDs
Support rewriting uninitialized original key IDs.

lNo Need for On-Vehicle Data Collection
Simply collect key data, upload for calculation, and obtain immo data without needing to access the vehicle.

How to use the Xhorse MLB Tool?
Here's taking XDMLB0GL MLB-Tool + VVDI2 to add the 2021 Audi A6 key for example.

1. Read vehicle immo by VVDI2
Open VVDI2 software, Key learn >> MLB IMMO system >> Identify vehicle info


2. Calculate MLB IMMO by VVDI MLB Tool;
1) Open the VVDI MLB Tool, click "Identify Key";
2) Soldering the PCB according to the connection diagram, click "Collect key data";
3) Save immo data file;
4) Special function >> Modify key ID;
5) Make dealer key >> Load saved file;
Make dealer key successfully.







3. Learn key by VVDI2
Learn key >> Load immo data


www.xhorse.co.uk

Oznake: xhorse mlb tool

Today I'm gonna use Xhorse VVDI Key Tool Plus to decode a 2021- Ford HU198T key. This could be applied to 2024 Ford Mavericks, (2021-)F-150s, Escape, or (2023-) F250s emergency key as well.

Cut key >> Vehicle database >> Ford >> All key blank >> HU198T
There are 4 HU198T key blanks, the difference is the depth.
If select the second one, we can see down here, it has 5 depths.
If select the third one, this has 4 depths.

Since I'm not sure which is the correct option, I'll check both.
Decode key >> Learn
VVDI Key Tool Plus gives the key bitting code: 4421232112

If you decode it under 5 and at first glance you might say that's completely wrong. None of the numbers are the same.
The correct key code should be the same as the paper.

So let's exit to select the second one.
Decode key >> Learn
Learn key success.
Now compared with the key codes, they are exactly the same: 5532343213.
Click "Find bitting".
Xhorse Key Tool Plus will give the key code: 30279, it's correct!
Also, we find all the 5 depths are filled with numbers.
That's it!






This is using Key Tool Plus to decode a 2021+ Ford F-150S/F250S/Escape H198T

www.xhorse.co.uk

Oznake: vvdi key tool plus

Just a quick guide on how to read immo data from BCM(Body Control Module) for key programming. Here I'm going to use Xhorse VVDI Key Tool Plus & BCM2 Solder-free Adapter to program 2013 Audi all keys lost.

Step1. Read Immo Data
Immo programming >> Audi >> Select by type >> Fifth immobilizer system >> Start programming >> Read BCM2 Data >> Prog read - unencrypted BCM2 >> Read BCM2 data
This operation will use prog to load P-FLASH and D-FLASH files in turn.
Click "OK".
BCM2(D70F3634)(Adapter - Welding free)
Follow the diagram to connect Key Tool Plus, BCM2 Solder-free Adapter & module.
Read >> Continue
Reading success.

Read P-FLASH successfully, click "OK" to read D-FLASH.
Read >> Continue
Reading success.

Step2. Obtain Immo Data
Immo programming >> Audi >> Select by type >> Fifth immobilizer system >> Start programming >> Read BCM2 data >> Load D/P Flash to obtain immo data

This operation will load P-FLASH and D-FLASH files in turn.
Click "OK" to start loading.
The p-FLASH file is loaded successfully.
Click "OK" to start loading the D-FLASH file.

VIN, CS, and key ID have been read out.
Read the data successfully, and click "OK" to save the data!

In the immo5 system, BCM2 data can make dealer key and learn key!






Step3. Make Dealer Key
Click "Make dealer key".
If you want to prepare an OEM key, make sure the new key supports change ID(most 3rd part keys do not support this)
If you want to prepare an OEM key, connect the device to the car and switch the ignition on.
Do you want to prepare an OEM key? (OEM key can enter dealer service shop)
Click "No".
A4L, A5, Q5 add a key or lost all key - Don't need a working key
Press OK to load the BCM2 data read in step 1.
Load file success.
Put a key into the programmer, then continue.
Now reprogramming key info, please wait...
Writing data, please wait...
Make dealer key success.
Done.




www.xhorse.co.uk

Oznake: vvdi key tool plus

This is using Xhorse VVDI PROG Programmer to repair Mercedes-Benz C class W205 BMS step by step.

This is the BMS used on Mercedes C class W205, the battery is out of power. So we need to repair the file. We'll use VVDI PROG to do this job.

Put some soldering paste on it. Use the hot air station to heat it until it reaches a certain temperature.

Then take it off with tweezers. Be careful not to overheat when heating. Otherwise, the chip will be damaged.

There's a point here. This shows pin No.1. According to the position, we'll know which direction to solder it on the adapter. Follow the 1 and match it to the small hole on the chip, which shows the pin1.

Then solder all. Put some soldering paste and connect this to VVDI PROG. Read and write.

Open VVDI PROG software, and select the type of this chip.
Memory >> Manufacturer - ST >> Model 95M01 >> Read
We can read files without problems.

Now select the file to repair BMS.
And write it.
Written successfully!

www.xhorse.co.uk

Oznake: vvdi prog