One customer gave feedback that the Xhorse VVDI MB BGA Tool failed to write mileage in the dashboard. The reason is that this model is not supported to repair KM.

Here we provide the VVDI MB odometer correction support list:

C(W204), GLK(X204), CLK(W207), E(W212), SLS(W197), CLS(W218)
R-Class(W251), GL(X164), ML(W164)
E-Class(W211), CLS(W219)
S-Class(W221), CL(216)
W166, W172, W246, W231
W205


www.xhorse.co.uk

Oznake: vvdi mb tool

Problem: Hello, I have a situation with a Mercedes Vito W639 2008. Only 1 key stopped starting, remote is still working. I checked with VVDI MB BGA Tool, see screens. Can I program a new key on bench or do more diagnostics? Very thanks.

VVDI MB Tool gave the attention:
"EIS is not synchronized with the current key!!! Maybe the key is not working key or EIS lost data!!!
If the key can not finish synchronizing, please try the following step when asked you insert the key to the ignition: Insert key and start engine -> switch OFF -> switch ON"

Solution
Yes. It can support adding keys on bench in the situation.
1. Disassemble the EIS module from the vehicle.
2. Connect EIS, 12V power supply & MB Tool according to the connection diagram.
3. Do key-adding procedure in MB Tool software.

www.xhorse.co.uk

Oznake: vvdi mb tool

How to program the Mercedes-Benz W204, W207, and W212 emulator key with the Xhorse VVDI MB BGA Tool? Read this article to learn.

Procedure
Connect MB Tool & ESL/ELV Emulator to the dashboard.
Open VVDI MB Tool Software,
Select Chassis: W172, 204, 207, 212(with ELV)
Click "Read EIS data".

Click "Get" to erase the password.
Save EIS data.

ESL Tools >> Chassis: W204, W207, W212, OBD mode
Click "Read ESL data".
Reading data success.

Load VVDI-MB EIS data >> Select "Auto clear TP and personalized" >> Write
Writing data, please wait...
Do you use an ESL emulator for the ESL? Yes
Writing data success.





Test the Mercedes key, it can start the dashboard.
Successfully completed.




www.xhorse.co.uk

Oznake: vvdi mb tool

Today we've got an Mercedes Benz W209 ignition switch with all keys lost. When I open it up, it's written W211, ST12 on the board. So next I'm gonna use Xhorse VVDI PROG + VVDI MB BGA Tool to program a key for the Mercedes.

It may save time if I had the solder-free Xhorse EZS Adapters, only to insert ST12 adapter into the board. Unfortunately, I don't have one. I should hook them up with the wires soldered.

Step1. Read & Save EEPROM
Now we're ready to get the eeprom info with VVDI PROG.
Select:
Type: 4-IMMOBILIZER, Brand: BENZ, Chip: EIZ-W211(ST12)
Click "Read", then save the file.


Step2. Save EIS File
Take all wires off the board, then connect to MB BGA Tool.
After loading EIS data/ Motorola EEPROM dump from step1, it gives me all the key password and FBS data.
Save EIS data >> press OK to save HC05 format file


Step3. Prepare Key File
Prepare key file >> Load EIS file >> Select key position: Key3 >> Prepare key file
Wait for a few seconds, finished.


Step4. Program Key
Let's put together the key to program it. Plug the key into MB Tool slot.
Read write key >> Identification key
It comes up as a BE Key.

Load key file in step3>> Write
Okay, it's written and completed.

Take out the key for a test, remember to put a battery inside.
It does turn on.
That's all done!



www.xhorse.co.uk

Oznake: vvdi prog, vvdi mb tool