Xhorse VVDI Key Tool Plus Pad is able to do BMW CAS3+ E92 mileage correction via EEPROM dump successfully. This is provided by Xhorse fan, please noted do not adjust mileage for illegal purpose.

Check full video:
https://www.youtube.com/watch?v=C_i99-A8xJg

Operation Procedure:
1. Backup Key Info
Immo programming >> BMW >> Select from system >> CAS3/CAS3+ immo system >> Key function >> Start programming >> Generate key via OBD >> Read key information

Add keys: please inset the ignition key into ignition switch and connect the vehicle and device well.
All keys lost: please insert a blank key into ignition switch and connect the vehicle and device.
Click "YES" to add key.
Cllick "NO" to all key lost.
Press "No".
Confirm key info, press "Yes".

The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there's no key ignition, continue anyway.
Press "OK".
Reading key success.
Save key file.




2. Read & Save EEPROM
Go back to
EEPRM function >> Start programming >> Read EEPROM

The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there's no key in ignition, continue anyway.
Press "OK".

Current EEPROM is not the whole EERPOM.
Please read and save it then continue.
Reading data success.






3. Mileage Adjustment via Dump
KM repair >> Start programming >> Repair mileage via EEPROM >> CAS3+(0L15Y, 0M23S) >> Load EEPROM dump file

Warning: KM re-calibration only use for repair car KM after exchange new dashboard!
Press "Yes" to continue.
Old KM: 193236
Input new KM: 123450
OK >> OK
Save the new KM file.








Change KM in immobilizer success, flash the new file into IMMO ECU.
You must change KM in instrument dashboard manually before connect IMMO ECU to car.

Repeat operations to check new mileage.
It has became to 123450km.
Done.






This is using VVDI Key Tool Plus to perform BMW CAS3+ E92 odometer correction OK.
www.xhorse.co.uk

Oznake: vvdi key tool plus