How to use Mini Key Tool to set frequency of Masker Garage Remote
13.02.2023.This post will guide you on how to use VVDI Mini Key Tool to set the frequency of Xhorse Masker Garage Remote.
Step 1. Connect to the device.
Remove the Xhorse logo and loosen the screw.
Then open the shell and take out the PCB board inside.
After pairing MINI Key Tool to the phone via Bluetooth, we connect the device to the masker with a programming cable.
Step 2. Generate copy program.
Tap "Garage Remote" on the app, go to "AA_Xhorse_copy program", select the last option, then tap "Generate".
It is worth mentioning that Masker adds an interface to support wired generating, which is more stable than a wireless generation.
So, we don't need to read the tips for wireless generating.
Just tap "OK" to start the generating.
Step 3. Customise frequency.
After the generate is completed, back to the homepage, tap "Special Function" and go to "VVDI remote function".
Then we select the last option and start "Garage door key customization".
First, we read the information about the Masker.
Then we can see the current frequency value in the table.
We just need to tap the frequency value, enter any value you want and tap "Settings" to modify the frequency.
Now we successfully get a remote that sets our required frequency.
For more details, please refer to the video below:
https://youtu.be/MhF7ZnOAc9s
Oznake: vvdi mini key tool
komentiraj (0) * ispiši * #
Xhorse VVDI MINI Key Tool Generate Cloud Key Option, Possible?
20.12.2022.Question: Can I use Xhorse VVDI MINI Key Tool to generate Toyota Verso 89070-47100 ASK 433 cloud key option?
Answer
As we can see, the Verso 89070-47100 ASK 433 is a cloud option.
For cloud remote option, please use XK wire remote to generate online via VVDI2, Key Tool Max and Key Tool Plus. Due to the mass of cloud data, MINI Key Tool is unable to generate this option. Please use the above mentioned tools to perform.
Hope this is helpful.
www.xhorse.co.uk
Oznake: vvdi mini key tool
komentiraj (0) * ispiši * #
BMW F Series 868MHz Key Renew via Xhorse VVDI MINI Key Tool
09.08.2022.Xhorse VVDI MINI Key Tool is able to renew BMW F series 868Mhz key successfully and easily. Following I'm gonna show how to do.
Check full operation on Youtube:
https://www.youtube.com/watch?v=I789pspAVt4
As you can see, this is a BMW F series locked key.
Chip type: PCF 7945P
Frequency: 868MHz
Open key shell, connect circuit board to VVDI MINI Key Tool.
Wiring connection can be found:
Special function >> Remote renew >> BMW >> 5WK49661 F Series 868MHz Continental
Click "Unlock".
Check key...
Renew in process...
Renew success.
Go back to read key info.
As you can see, it's unlocked now.
Done.
www.xhorse.co.uk
Oznake: vvdi mini key tool
komentiraj (0) * ispiši * #
Xhorse VVDI Mini Key Tool + Super Chip Generate Toyota 8A
26.05.2022.How to generate Toyota 8A transponder with Xhorse VVDI Mini Key Tool + XT27 Super Chip? This is a quick tutorial to show how easy it can do.
Step1. Open Xhorse app on a smart phone, and connect to VVDI Mini Key Tool via Bluetooth.
Step2. Go to Generate transponder >> ID8A >> New 8A chip
Put VVDI Super Chip into Mini Key Tool chip coil.
Press "Generate".
Completed!
Toyota 8A chip has been successfully generated in a matter of seconds.
Read also:
How to change super chip type with Xhorse VVDI MINI Key Tool?
http://blog.xhorse.co.uk/how-to-change-super-chip-type-with-xhorse-vvdi-mini-key-tool/
Oznake: vvdi mini key tool
komentiraj (0) * ispiši * #