How to use CGDI PRO MB Program Benz W211 Key
subota , 08.09.2018.Connect the equipment, the OBD connects the vehicle, opens the door, and keeps the vehicle voltage stable (12V).
How to program new W211 key using CGDI Prog MB
http://www.chinacardiags.com/upload/pro/how-to-program-new-w211-key-using-cgdi-mb.pdf
1.open software click“Read EIS Data”
Read data success show related information
3.Turn to “Compute password” choose“ copy key with key” then click“Collect Data”
4.choose“other keys” Click ''ok''
5.please insert the key into EIS and click ok
6.please insert the key into the CGMB device and click ok
It is collecting the key data
7.Key collection finished please insert the key into EIS and click ok
please wait 9 seconds
10.please pull out the key from the EIS, and then click ok
11.please insert the key into the EIS again and click ok
12.Pull out the key for 5 seconds,then insert the EIS, then click ok
13.please insert the key into the CG-MB device again and click ok
14.Collect sucess save data default file name
15.Save the file successfully click ok
16.Click '' Upload Data ''
17.Open the file just saved in last step
18.Upload data successfully
19.Click“Query Result” please wait patiently
20.Computing success click ok
21.Copy password
22.Go to the EIS interface and paste
23.Save EIS data
24.Turn to“Generate EE” Load EIS file just saved
25.Check the information and click“Generate key file”
26.Generated file successfully and save the file
27.Go to “Read write Key”
28.Put into new key
29.Show key information after reading
30.Click“Rest wipe” prompt ''Reset operation succeed click ok
31.Click“open write” please note the prompt
32.Select an unused key bit data and open it
33.write success
34.Insert the new key into EIS and start
35.Read EIS again, the key position prompt has been used, the combination can be activated, the match is successful!
Original:How to use CGDI PRO MB Program Benz W211 Key
komentiraj (0) * ispiši * #
