Lonsdor K518ise added new keys to Citroen Nemo 2009

subota , 29.09.2018.

(26-09-2018) Lonsdor K518ise key programmer managed to add new keys to Citroen Nemo 2009 with 93c86 eeprom

Here you go..



Good to know:  Lonsdor K518ise PSA car list

Lonsdor K518ise works well with the French vehicles: Peugeot /Citroen.

There are two ways to read PIN codes & program new keys (even when all keys are lost)

Lonsdor K518ise CITROEN

Series	Origin	Year	Fuel Type	Function
C4	Other	Other	Other	Key Programming
Triomphe	Other	Other	Other	Key Programming
C5	Other	Other	Other	Key Programming
359	Quatre	Other	Other	Key Programming
C4L	Ordinary Key	Other	Other	Key Programming
C4L	Smart Key	Other	Other	Smart Key System
Classified by System	Smart Key	Other	Other	Smart Key System
Read PIN Code	Other	Other	Other	Read PIN Code
Classified by System	Ordinary Key	Other	Other	Key System

Lonsdor K518ise PEUGEOT

Series	Origin	Year	Fuel Type	Function
308	Other	Other	Other	Key Programming
3008	Other	Other	Other	Key Programming
307	Other	06-	Other	Key Programming
308S	Other	Other	Other	Key Programming
Read PIN Code	Other	Other	Other	Read PIN Code
Classified by System	Smart Key	Other	Other	Smart Key System
Classified by System	Ordinary Key	Other	Other	Key System
207	Other	Other	Other	Key Programming
307	Other	-06	Other	Key Programming
508	Smart Key	Other	Other	Smart Key System
508	Ordinary Key	Other	Other	Key Programming
408	Other	Other	Other	Key Programming

Lonsdor K518ise FULL car list:

Highlight:

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
2016 -New Maserati: smart key programming
2016 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

Europe: (good for EU cars)
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,
Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,
Borgward

America:
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,
Toyota, Shigaoka Queen

China: 
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car
models are included)



Lonsdor K518ise user manual + car list:

http://obd2-diag.blogspot.com/2017/10/lonsdor-k518-user-manual.html

Lonsdor K518ise Where to:

http://www.obd2diy.fr//lonsdor-k518ise-programmeur-de-cle-plus-ske-lt-smart-key-emulator.html

How to solve Can't Find VVDI-MB Tool error?

VVDI MB Tool newest version is V4.5.0,and after download newest software to run,vvdi mb tool connect with computer with usb cable,and green light is on,but got "error-can't find VVDI-MB Tool,reconnect VVDI-MB and try again",just like following pic shows:



How to solve Can't Find VVDI-MB Tool error?

1.Please use xhorse update kit software to update firmware and check again.

Please click find device firstly,after computer recognize your device serial number and firmware version,then click upgrade.



If can find device,and update successfully,ususaly it is OK to run vvdi mb software.

2.If after click "Find Device',still got not found error like following display.



Please download the two driver,run the first one,if not working,try the second driver.

Here is download link or contact us online to get:

Driver 1:

https://mega.nz/#!wS4njRQA

Driver 2:

https://mega.nz/#!MKxlWBiC



If first driver working OK,then continue to do update process.

If first driver get error,like this



Run Second Driver

If second driver got the error,please click change setting,then choose "automatic..."one,and try run second driver.exe again.Then it will be OK.



After install driver successfully,find device is OK,and click upgrade.



Please confirm the update process succeed.If failed,please try again update.Then test vvdi mb tool software is working OK.



VVDI MB Tool Password calculation one year unlimited tokens 380USD,we activate online in 1-2 hours when we are on work



Here we attach newest V4.5.0 VVDI MB Tool software and Xhorse update kit software download link:

VVDI Benz Latest Version:V4.5.0

Free Download V4.5.0 VVDI Benz Software [Password:123456]

Xhorse Upgrade Kit Software[Please close your anti-virus software,as it contact .exe application,may recognise as virus.It is clean to use.]



 http://www.xhorsevvdi.com/

Clone Tech 2 and TIS2000 on Windows 10 Review

četvrtak , 27.09.2018.

Well, I finally got the tech2, i had to file a dispute through paypal though. The tools arrived 2 days later. Tech 2 looks and feels exactly like the gm one. $229.00 for a brand new tech2 scanner with a candi module. all the cables and adapters and case is great

Here it is !



32 MB PCMCIA card



Tech 2 main unit



TIS2000 CD, DVD etc



full set cables



Package includes the TIS2000 CD and DVD along with the USB Key

TIS2000 lets the Tech2 communicate with a computer (Win XP/vista and virtual machine i think.) to download data. The USB key is for accessing the GM site to revise the PCM settings so long as there were allowed by GM.



I’m good to go ! I’m trying to learn the Tech 2 and figure out the use of the Tech 2 and the TIS2000 I bought .

I run TIS2000 in a virtual winXP on my win 10 computer using Oracle Virtualbox .

Here is a photo I took just showing how you can use the Tech 2 scanner together with a windows 10 pc and the TIS2000 running in a virtual win XP pc .

I have also connected the USB key to a USB port and it recognized by the virtual pc .



As far as I have learned by now is that the main use of TIS2000 is to update an existing PCM or flash a replacement (new) PCM .

As far as I also have learned you download files for your VIN from ac delco site by means of the TIS2000 first . Then you copy these files from the pc into Tech2 memory . Afterwards you connect the Tech2 to the OBD2 plug in car and update according to correct prosedure . I hope you can confirm if this is correct ....

I can´t see any problem with reflashing the PCM using this clone .

This video seems to confirm that the quality is good of these clones .



 from:Clone Tech 2 and TIS2000 on Windows 10 Review

Volvo OBD odometer correction: OBDSTAR X300M possible?

Well, I finally got the tech2, i had to file a dispute through paypal though. The tools arrived 2 days later. Tech 2 looks and feels exactly like the gm one. $229.00 for a brand new tech2 scanner with a candi module. all the cables and adapters and case is great

Here it is !



32 MB PCMCIA card



Tech 2 main unit



TIS2000 CD, DVD etc



full set cables



Package includes the TIS2000 CD and DVD along with the USB Key

TIS2000 lets the Tech2 communicate with a computer (Win XP/vista and virtual machine i think.) to download data. The USB key is for accessing the GM site to revise the PCM settings so long as there were allowed by GM.



I’m good to go ! I’m trying to learn the Tech 2 and figure out the use of the Tech 2 and the TIS2000 I bought .

I run TIS2000 in a virtual winXP on my win 10 computer using Oracle Virtualbox .

Here is a photo I took just showing how you can use the Tech 2 scanner together with a windows 10 pc and the TIS2000 running in a virtual win XP pc .

I have also connected the USB key to a USB port and it recognized by the virtual pc .



As far as I have learned by now is that the main use of TIS2000 is to update an existing PCM or flash a replacement (new) PCM .

As far as I also have learned you download files for your VIN from ac delco site by means of the TIS2000 first . Then you copy these files from the pc into Tech2 memory . Afterwards you connect the Tech2 to the OBD2 plug in car and update according to correct prosedure . I hope you can confirm if this is correct ....

I can´t see any problem with reflashing the PCM using this clone .

This video seems to confirm that the quality is good of these clones .



 from:Clone Tech 2 and TIS2000 on Windows 10 Review

Autophix 7710: Confirmed to work with Ford/Lincoln/Mercury 1996-2017

petak , 21.09.2018.

Autophix 7710 User Manual for Ford/Lincoln/Mercury diagnosis:

What is Autophix 7710:

Autophix 7710 is a hand-held diagnostic tool for Ford, Lincoln and Mercury from 1996 to 2017. it’s good at OBD2 diagnostic tests and special functions incl. oil service reset, DPF rest and EPB replacement, etc.

• Easy to Use- 2.8 inch large LCD display (320*240 pixel) coupled with smart menu interface design is easy to read the DTC definitions in multiple languages (English, German, French, Spanish). One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification. 

With Autophix 7710, what can you do with a Ford/Lincoln/Mercury:

• Comprehensive Systems Diagnosis- professional vehicle diagnostic scan tool features fast reading / clearing trouble codes, viewing live data on all systems including engine, abs, airbags, auto transmission, instrument and other control systems. Meets all OBD2 protocols: CAN, J1850 PWM, J1850VPW, ISO9141, KWP2000 and has through CE, FC and ROHS certification.


• OBD2 Functions- With this diagnostic tool you can identify problem areas and repair the emissions-related faults by using complete OBD2 functions like reading/clearing DTCs, live data, display I/M readiness status and EVAP system test etc, which suitable for all 12 volt OBD 16 pin vehicles.

• Special Features - Oil change indicator reset, DPF reset, EPB replace brake pads and other special functions enable technicians and home users to accurately diagnose even the toughest car problems on Ford, Lincoln and Mercury sold worldwide from 1996 to 2017.

• Update & Feedback - The OBDII car analyzer comes with free software updates for life to fix the latest bugs or add newly parameters, and feedback function allows Autophix Technician to assist you quickly and accurately troubleshooting the vehicle. We also provide one year warranty to lessen your worries.

Possible to use Autophix 7710 with new Ford/Lincoln/Mercury:

• Vehicle list - All vehicles of Ford,Lincoln and Mercury from 1996 to 2017

Autophix 7710 unit tested before delivery:

 

Credits to professional from chinacardiags.com



Autophix 7710 User Manual:



Source: http://www.chinacardiags.com//autophix-7710-epb-dpf-abs-srs-oil-fd-obdii-diagnostic-scan-tool.html

Autophix 7710 package:

















 Original:Autophix 7710: Confirmed to work with Ford/Lincoln/Mercury 1996-2017

JLR Key Programmer: JLR-IMMO vs Mart Tool

utorak , 18.09.2018.

Comparison: JLR-IMMO vs Mart Tool

Key programming tool for Jaguar & Land Rover	JLR-IMMO	Mart Tool
Image
Price	$499	$105 + another programmer
Register	Do it yourself! Register via the official site http://u.lonsdor.com	Helped by chinacardiags.com! Send the serial number (24-digit) to register your tool with a laptop
Activate	Do it yourself! Get the activation code from the official site	Helped by chinacardiags.com!
Update	Do it yourself! Free update online via the official site	Helped by chinacardiags.com! Free update with the new software set by the factory: Free Download Mart Tool JLR Software
Soldering	No need soldering	No need soldering
Connection	OBD	OBD
Time	Save time! Connect to the car directly and then generate new keys	Time-consuming! Read and write keys with different programming tool
Read data	Yes It can read key data itself	No You have to get another programmer  (i.e VVDI Prog, Xprog) to read out the D-Flash and EEE data in the KVM
Write key info	Yes	Yes
Add a new key	Yes	Yes
All keys lost	Yes	Yes
KVM smart key FK72	Yes	Yes
KVM smart key HPLA	Yes	Yes
KVM	DPLA-14C104-C NEW FK72-14C104-BA NEW FK72-14C104-BB NEW FK72-14C104-BC NEW FK72-14C104-BD NEW FK72-14C104-BE NEW FK72-14C104-BF NEW BH42-14C184-AA NEW FK72-14C104-AF FK72-14C104-AH	Unknown Test it yourself
BCM	DPLA-14C184-AM NEW BJ32-14C184-AC NEW CPLA-14C184-AE NEW CPLA-14C184-AF NEW GX73-14C184-AJ GX73-14C184-AK GX73-14C256-AH	Unknown Test it yourself
Car list	Jaguar and Land Rover after Year 2016	Jaguar and Land Rover 2015-2018

Summary:

Mart Tool is much cheaper than JLR-IMMO, but you have to buy another programming tool to read key data. In fact you will spend more money with Jaguar or Land Rover key adding with Mart Tool if you don’t have a good JLR programmer and have to buy a new one. A programmer for JLR will cost $50 - $500, depending on the quality and your car (some cheap might not work with your car). Also, the car list is unclear that you should take a risk to test yourself.

JLR-IMMO will be a good solution of key programming for Jaguar and Land Rover. Easy to make new keys through OBD - save time a lot! It’s used with expertise, trustworthy and relief because it comes from Lonsdor, the producer of K518ISE key programmer. The team is equipped with professional knowledge and rich experience in programming keys.



Original: JLR Key Programmer: JLR-IMMO vs Mart Tool

FVDI, FVDI2, VVDI2 - What’s the main difference?

Look here: How do the the professionals/experts think of FVDI, FVDI2, VVDI2?

Part 1: fvdi vs fvdi2

FVDI 2015: has the same interface as the original AVDI

FVDI2 2018: includes FVDI, FLY OBD Terminator, J2534 software and VVDI2

Note that, This 2018 version has the same software versions as the 2015 version except that has updated software for VAG and BMW/Mini which is from the VVDI software. IMMO 4 and 5 key programming is working.

PCB images: http://obd2-diag.blogspot.com/2018/06/main-difference-between-fvdi-2015-and.html

Part 2: fvdi2 full vs vvdi2 full

FVDI2: is able to do diagnosis, add new keys and program ECUs....(it’s said that it can do everything for car repair, but in the real tests, you  need luck with it coz its stability is not really good.)

VVDI2: is known as an auto key programmer, esp. for VAG (4th & 5th immo, MQB) and BMW (EWS, CAS, FEM/BDC)! Actually, if you know Xhorse well, you will use vvdi tools for key programming instead of diagnostics, odometer correction, etc... although functions expect key adding can be done but you’re not advised to buy vvdi tools for the other functions.)

Part 3: tech support

obd2diy.fr will offer professional tech support for fvdi, fvdi2 and vvdi2 key tools from experienced expert, including software authorization, installation.

Xhorse (VVDI2) will have better experience and tech support than FLY (FVDI2)

MB Star Diagnosis & Parts Store manager recommended

petak , 14.09.2018.

SEC-E9 key cutter + Lishi 2 in 1 tool program TOY43 key

Important notes for you all:

how to program Toyota TOY43 key using a SEC-E9 key cutting machine and Lishi 2 in 1 set

Pick the lock using a Lishi 2 in 1 locksmith tool



Toyota TOY43 door lock: 8 blades, ignition lock: 10 blades;

Enter the "data search" - "key blank search" - "manual input"

Enter the key codes decoding by the Lishi tool

Start at Position 3 on the left



Fix the key with help of the SEC-E9 clamp as the pic displayed

Select “middle speed” and “three end positioning”

Clean the lamp and cutter before cutting the key

The key is cut successfully

Remove the key

Clean the clamp again



Missing teeth query - find out the specific tooth depth of the ignition lock:

empty the first two digits, and input the known 8 digits, click on “Query”;

try one by one from the detected tooth number;

turn on the ignition lock and do the remote control matching



Done!

Note that you can find the key cutting machine is kind of different from that on the web. Because it’s the Chinese version - SEC-E9z, not the international version - SEC-E9. But you can cut Toyota TOY43 keys using a SEC-E9 key cutter with relief, as SEC-E9z and SEC-E9 share the same functions in terms of car key cutting. For details of “SEC-E9z vs SEC-E9”, please go to the site:

How to use VVDI2 BMW FEM BDC to Reset Mileage?

utorak , 11.09.2018.

VVDI2 BMW newly add BMW FEM BDC authorization service.If you need do BMW FEM BDC module,you need add authorization firstly.Here we will display VVDI2 BMW FEM/BDC module Mileage change steps.

1.Start VVDI2 BMW software,and choose Key Learn>FEM/BDC Key Learn>Get Key Info



2.Choose "Programming FEM/BDC system".Then do like software procedure shows.



Step 1:

1.Read FEM/BDC coding via OBDII or on the bench.

2. You’d better not close this window after start the procedure.







Step 2:

1.Open FEM/BDC shell, find 95128/95256 chip position, read EEPROM dump via BDM programmer.

2. Load original EEPROM dump and save special eeprom dump, write special eeprom dump back to 95128/95256 chip.

3. Restore FEM/BDC shell, provide +12v and connect OBD.

You can use Xhorse VVDI Prog to read the eeprom dump file.





VVDI PROG Read and save file.



Step 3:

1. This operation require FEM/BDC on the bench, and make sure you finish step1 and step2.

2. Provide +12v to FEM/BDC and connect OBD.



Step 4:

1.Open FEM/BDC shell,write original EEPROM dump (read in step2) back to 95128/95256 chip.

2. Restore FEM/BDC shell, provide +12v and connect OBD.





Step 5:

Load coding file read in step1, write to FEM/BDC via OBDII, finish FEM/BDC programming.





3.Reset KM.





Edit by http://www.xhorsevvdi.com/ :How to use VVDI2 BMW FEM BDC to Reset Mileage?

Is VVDI Prog Necessary for VVDI2 BMW FEM/BDC function?

ponedjeljak , 10.09.2018.

vvdi2 commander key programmer BMW FEM/BDC function is supported via VVDI2,but it is not OBD way,it needs to remove dashboard.And in vvdi2 bmw fem function,will you need BMW FEM/BDC key program and km function?



1.VVDI2 BMW FEM Key Program

In some videos,it displays use VVDI Prog,then use VVDI2 BMW FEM.It is using vvdi prog programmer to read BMW ISN,VVDI2 can also read BMW ISN in BMW ISN function.



2.VVDI2 BMW FEM

2.1. Change only FEM km,no need use other.

2.2. Change Car KM,you need also change 35080 chip in dashboard.You can use VVDI Prog.









Edit by http://www.xhorsevvdi.com/ : Is VVDI Prog Necessary for VVDI2 BMW FEM/BDC function?

How to fix Renault CAN-CLIP MTC Error to work with NEW cars

Here, I’d like to explain why Renault can clip can not make diag for new models & asks for MTC & how to fix this

 

MTC error is common known issue on CAN-CLiP, this when the car is too new for the firmware the version of sw CLiP you use, the usual delay is 2-3 months for a new manufactured car to be enlisted on the firmware of the newest version of sw CLiP.
As example, the latest version of sw CAN-CLiP v178 issued June 2018 make ok diagnose Reno-Dacia cars for at most April 2018.

For a representative Reno-Dacia workshop this is not a problem they use net connection for getting on-line the newest cars characteristics

How to use CGDI PRO MB Program Benz W211 Key

subota , 08.09.2018.

Connect the equipment, the OBD connects the vehicle, opens the door, and keeps the vehicle voltage stable (12V).

How to program new W211 key using CGDI Prog MB

http://www.chinacardiags.com/upload/pro/how-to-program-new-w211-key-using-cgdi-mb.pdf

1.open softwareclick“Read EIS Data”



Read data successshow related information



3.Turn to “Compute password”choose“ copy key with key”then click“Collect Data”



4.choose“other keys”Click ''ok''



5.please insert the key into EIS and click ok



6.please insert the key into the CGMB device and click ok



It is collecting the key data



7.Key collection finishedplease insert the key into EIS and click ok



please wait 9 seconds



10.please pull out the key from the EIS, and then click ok



11.please insert the key into the EIS again and click ok



12.Pull out the key for 5 seconds,then insert the EIS, then click ok



13.please insert the key into the CG-MB device again and click ok



14.Collect sucesssave datadefault file name



15.Save the file successfullyclick ok



16.Click '' Upload Data ''



17.Open the file just saved in last step



18.Upload data successfully



19.Click“Query Result”please wait patiently



20.Computing successclick ok



21.Copy password



22.Go to the EIS interface and paste



23.Save EIS data



24.Turn to“Generate EE”Load EIS file just saved



25.Check the information and click“Generate key file”



26.Generated file successfully and save the file



27.Go to “Read write Key”



28.Put into new key



29.Show key information after reading



30.Click“Rest wipe”prompt ''Reset operation succeedclick ok



31.Click“open write”please note the prompt



32.Select an unused key bit data and open it



33.write success



34.Insert the new key into EIS and start



35.Read EIS again, the key position prompt has been used, the combination can be activated, the match is successful!





Original:How to use CGDI PRO MB Program Benz W211 Key

Yanhua Mini ACDP BMW vs. CGDI BMW

Here is the chart to help you have an idea of BMW key programming with Yanhua Mini ACDP and CGDI BMW. You will get the difference of ACDP BMW and CGDI BMW and make a good purchase at a decent price.

Features/Tools	Yanhua Mini ACDP BMW	CGDI BMW
Image
Highlight	No need to remove chip! No need soldering! No need to cut the line! No need to lift the pin!	OBD key program! Run faster! Test a lot = Safety!
Workable interface	Mobile with Android or iOS	PC or Laptop
Connection	Wifi connection to a mobile	Wired connection to a PC
Update	Free and online update by scanning the QR code	Free and online update in http://www.cgprogcar.com/
Tokens	No need tokens	No need tokens Note: It’s necessary to buy Tokens if it’s CGDI-MB.
Method	OBD	OBD
Key programming	CAS1: Yes CAS2: Yes CAS3: Yes CAS3+: Yes CAS4: Yes CAS4+: Yes FEM/BDC: Yes	CAS1: Yes CAS2: Yes CAS3: Yes CAS3+: Yes CAS4: Yes CAS4+: Yes FEM/BDC: Yes
Odometer correction	Yes	NO
F series coding	NO	Yes
EGS ISN reading	NO	Yes
Activation/Adapter	ACDP needs adapters to work with. You should buy different adapters for various modules: CAS1-4+ immo; FEM/BDC immo & dashboard; FRM footwell module (0L15Y 3M25J); 35080, 35160DO WT Eeprom. And you should have another adapter to read ISN; adapter to read DME ISN (when all keys are lost); adapter to renew key. Btw, you can get a Mini ACDP FULL kit.	CGDI doesn’t need adapter to work with. But you need another programmer to read modules, need a cable to read DME ISN from MSV and MSD And you should get authorization for some functions: BWM FEM/BDC Authorization

In short,

If you are not equipped with soldering knowledge & rich experience and don’t have another tool to read modules, Yanhua ACDP can be a good helper.

For personal use, you’re advised to have a Mini ACDP main unit and the adapter for your BMW.

For auto repair, have a Mini ACDP FULL kit = have all for BMW key making and module programming.

If you are looking for a reliable tool for safety and speed, CGDI BMW is the best solution. Tools from chinacardiags.com is tested before delivery, and more and more cars are tested by professionals there. A lot of CGDI test report can be found here: https://obd2-diag.blogspot.com/2017/10/cgdi-prog-mb-bmw-test-report.html and there will be more updated chinacardiags.com



Original: Yanhua Mini ACDP BMW vs. CGDI BMW

Vxdiag A3 BMW G12 2015 Diagnostic Test: Done!

četvrtak , 06.09.2018.

Test: Vxdiag A3 on BMW with ISTA+ - read & clear fault codes



Vehicle: BMW 7 series G12 sedan 730Li B48/auto/ece/ll/2015-11



Vehicle test:



Connection: of Vxdiag multi tool,laptop and BMW:





Read and clear codes:



Job’s done!

Result: success!

Tech support from obd2diy.fr

Peugeot 406 Key Programming: Obdstar F108+ Works?

Test: Possible to read PIN codes and program new keys to Peugeot 406 2003 by a Obdstar tool?

Tested with OBDSTAR F108+ PSA key programming tool

Important: Based on F108, F108+ PCB is updated for k-line



Tested by professionals working for obd2diy.fr

The test... here you go.

The car: Peugeot 406 2003



The key to read Pin:



The dashboard status:



The Obdstar tool: F108+





Source: http://www.obd2diy.fr//obdstar-f108-psa-pin-code-reading-and-key-programming-tool.html

The OBD connection:

OBD port is located in under the dashboard on the driver side on Peugeot 406



The process: Obdstar F108+ starts to read PIN codes



Result: Failed!

Reason: For kline to read pin codes, the obdstar only works for cars post-2008

KEYDIY KD900: How to know which remote for a specific vehicle?

srijeda , 05.09.2018.

Good to know for KEYDIY KD900: What is the most efficient way to figure out which remote you need to create for a specific vehicle?

Look up oem part numbers from dealer or online to cross reference?

FCC ID?

Create and try...and try... and try...?

Depends on where you are located... In the USA we go by FCC ID... There are a lot of websites that sell OEM remotes so searching for the FCC I on them is very easy

Use Google... If you have the FCC ID plug that in and a lot of times it will tell you the OEM part numbers

Also, here are possible ways for you guys to go.

1) ask on FB or WhatsApp groups

2) choose a remote by matching the picture to customer’s existing remote (if you are doing a spare)

3) take laptop and KD900 to car and start from the last remote and work your way up. (We are 433mhz in SA, therefore I start at the bottom where the 433’s are)

Note that The 'smart match' function is not open for the Keydiy kd-x2.
What you watched was the special copy function, for remotes that aren't in the KD. So that's something different.

Smart match used to match on Vw stuff but for some reason got removed

And I have never been able to clone a remote on kd900

Get your car into remote programming mode and then work through the list from the bottom and use “simulate device”

The last - a great Question & Answer - good to know:

Q: When you make notes on what car worked with the remote and you add the FCC in the pc software, does it get updated throughout the keydiy system for all dealers to benefit from?

A: No notes are personal. Only if you fill in the feedback. That is usable for all KD users

VXDIAG C6 Mercedes = SDconnect C4 + DoIP

VXDIAG C6 for Mercedes:

http://www.obd2diy.fr//vxdiag-c6-wifi-bluetooth-obd2-diagnostic-appareil-pour-benz.html



Confirmed to work with Xentry Openshell XDOS!

Confirmed to work with DoIP protocol! (SDconnect cannot work!)

Confirmed to do SCN coding!

Confirmed to do diagnostic tests and ECU programming!

That is,

VXDIAG Mercedes can be regarded as

another SDconnect C4 but the PCB is reworked to support DoIP!

OR

another SDconnect C5!

Upload images...

VXDIAG C6 working with XENTRY 

VXDIAG C6 working with DoIP