Mercedes Benz Xentry OpenShell XDOS 2017.09 free download and install

srijeda , 27.09.2017.

Mercedes Benz Xentry OpenShell XDOS 2017.09 free download

https://mega.nz/#F!ZUZz3JBL!0NSwL9wyFV9ApFqRR0Jofw , 28774.84MB

PW: OpenShell9.2017

Mercedes Benz Xentry OpenShell XDOS 2017.09 software features:

Starkey like old version 7 2017 and 5 2017

More secure

Data is not visible

DAS Controlled from xentry

AddOnCenter doesn`t close to a tray, if it was once opened , to get create controlled for Message Queue (MSMQ) Server, that why show error on shutdown

Security analysis:

There new security not activated, may be will activated on next version

2221-XX Verify by server

3.91 Verify by vehicles

DAS License verify by Xentry

XDOS_09.2017_Missing_Pics_Fixed_x86_x64:

https://mega.nz/#F!ZUZz3JBL!0NSwL9wyFV9ApFqRR0Jofw , 28774.84MB>https://mega.nz/#!gdIV1CzA!XGlvg0Ckh65uQcXkFMJfwqQ_5QV0grfAqYL-QIDyVQQ 46KB (No pass)

Try to download and test at your own risk. Remind: it may too slow to download the 28774.84MB files online.

Any better source to have Mercedes Benz Xentry OpenShell XDOS 2017.09?

Yes! I go for this Mercedes Benz Xentry OpenShell XDOS 2017.09 in SSD format

Also this Mercedes Benz Xentry OpenShell XDOS 2017.09 in common HDD format

Pros:

No need to download such large files

Comes with after-sale service

Wallpaper:





Xentry OpenShell 2017.9 support tool



Xentry OpenShell 2017.9 installation:

Tips:

1. You need absolute clean windows. choose win 7 32bit


2. Available hard disk space: C::157.00GB.

Take an example.

Xentry OpenShell 2017.9 installation error: The InstallShield Wizard was interrupted before Xentry Diagnostics Openshell could be completely installed.



Possible reasons:

1- from virus

2- or Microsoft Message Queue Service is not enable

Please make sure you do like these tips:

1. You need absolute clean windows. choose win 7 32bit


2. Click to show you the log file and read that. It will be specified what has gone wrong with your install.


3. Be sure to run your install with administrator rights and have enough room on your HDD.

Finally, the problem is solved.

It was the Microsoft Message Queue Service not enabled now is installing fine.

In conclusion:

Online download the free version or pay a about 100dollars to get the verified version with after-sales service, it's up to you.

Good luck.

How to use Iscancar VAG MM-007 Change 4th IMMO UDS Instrument?

petak , 22.09.2017.

Iscancar VAG MM-007 English/Chinese version is in stock now.And MM-007 can support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login .etc



1.Firstly,it will request PIN and CS information to input into new instrument, you can get it via Iscancar VAG MM-007 to read by OBD from the engine or IMMO system to read.



2.Enter the new PIN, CS1 (6 bytes CS in the engine), CS2 (another 6 bytes CS), in general,the IMMO system will display all the data, power level (the value in IMMO and the engine system needs to the same).



3.Enter new VIN and IMMO code.



4.Confirm the data is right or not.



5.If all the data is right,the dashboard will display new information for PIN,CS,VIN.etc.

6. Instrument matching is completed, the dashboard will display 0-0, then need to learn the key and synchronous engine, you can complete it with VAG MM-007 too.

How to use VVDI MB Tool Program Benz W220?

utorak , 19.09.2017.

VVDI MB BGA Tool can do different Benz car models,and in the list it can support to program keys for W215, W220.Here this blog will display about VVDI MB Tool program Benz W220 key.

1.Start VVDI Benz software,connect VVDI MB with computer,insert IR adapter into car.



2.Choose EIS Tools and IR mode.



3.W220 chassis.



4. Click "Read EIS Dada and Password"

Insert IR adapter to car.Take out and insert again.Remain 30 seconds.



5.Reading data,then it shows:read password via IR,click Yes to continue.



6.After read password successfully,it will display automatically.If it fails,please try other way to get key password.



7.Click "Save EIS Data",save the data.



8.Click "Prepare Key File",then "Load EIS File"



9.Paste the key password you have read in step 6.



10.Choose the key number,and then "prepare key file".



11.Click "Read Write key" in vvdi mb tool software.Then identification key.

12."Load key file".



13.Writing key successfully.

(solved) Multi Diag Access J2534: VCI serial not found

ponedjeljak , 18.09.2017.

(Solved) Error: "VCI serial not found" in Actia Multi Diag Access J2534

O.S.: 2 different laptops with 2 fresh installation off windows XP

VCI serial : A070026

Procedure:

Step 1: Installation of multidiag office
Step 2: open multi diag after installation, choose USB Actia Passthru
Step 3: Enter VCI serial : A070026

And all the time i get the "VCI serial not found", anyway i cancel that Windows.
Put the Serial number get by the Keygen, and even in the Multidiag office interface if i try to put the serial "A070026" i get the error 2 xxxxxx

I reflash also the VCI with the VCI flsh tool get in this Forum to be sure to get the good serial "A070026" and plug it in the Car and reopen Multidiag and same error all the time.

I put "A070027" and that work, i try also to look for the "A070027" in the registery and replace it by "A070026", but still no way to get a DIag

I Install the Actia I-2010 (19.09) from 2 sources to be sure, 1 get from Rapidshare and the Other from Torrent.

Same Thing.

Solutions:

(all solutions here are shared by users; you’re trying on your own risk!!!!!!!!!!!)

Solution 1:

 

look at the AT530 file in
C:ACTIAMulti-Di@gAT530Key
open it with notepad
and look and search for 70026

if you don’t find it you have the wrong MD DVD
free download MultiDiag I-2010 A070026 (Multi-Di@g)

https://www.rapidshare.com/files/418771484/Multi_Di_g_I-2010__A070026_.part09.rar

https://www.rapidshare.com/files/418774364/Multi_Di_g_I-2010__A070026_.part11.rar

https://www.rapidshare.com/files/418784682/Multi_Di_g_I-2010__A070026_.part13.rar

https://www.rapidshare.com/files/418762875/Multi_Di_g_I-2010__A070026_.part03.rar

https://www.rapidshare.com/files/418762849/Multi_Di_g_I-2010__A070026_.part04.rar

https://www.rapidshare.com/files/418787019/Multi_Di_g_I-2010__A070026_.part19.rar

https://www.rapidshare.com/files/418762788/Multi_Di_g_I-2010__A070026_.part05.rar

https://www.rapidshare.com/files/418784717/Multi_Di_g_I-2010__A070026_.part14.rar

https://www.rapidshare.com/files/418762901/Multi_Di_g_I-2010__A070026_.part06.rar

https://www.rapidshare.com/files/418779723/Multi_Di_g_I-2010__A070026_.part18.rar

https://www.rapidshare.com/files/418763081/Multi_Di_g_I-2010__A070026_.part08.rar

https://www.rapidshare.com/files/418762661/Multi_Di_g_I-2010__A070026_.part02.rar

https://www.rapidshare.com/files/418782416/Multi_Di_g_I-2010__A070026_.part12.rar

https://www.rapidshare.com/files/418762051/Multi_Di_g_I-2010__A070026_.part01.rar

https://www.rapidshare.com/files/418777866/Multi_Di_g_I-2010__A070026_.part16.rar

https://www.rapidshare.com/files/418778746/Multi_Di_g_I-2010__A070026_.part17.rar

https://www.rapidshare.com/files/418777073/Multi_Di_g_I-2010__A070026_.part15.rar

https://www.rapidshare.com/files/418782381/Multi_Di_g_I-2010__A070026_.part10.rar

https://www.rapidshare.com/files/418763044/Multi_Di_g_I-2010__A070026_.part07.rar

Solution 2:

Try to Re-Flash your VCI with the Flash Tool Via RS232 and IF still you meeting this problem
your VCI needs immediately repair! It is "Common" LQ Clone Hardware issue!

Good Luck!

Solution 3:

you need to register the machine, look the attachment about how to get the serial number.

In the process of installation, please set “ Communication Interface” as “USB”, set “VCI serial number” as “A070026”.




When appears this window, please fill A070026, then click the green button.


After finishing installation, it will appear this picture in the screen of Mutil Diag, click the green button.


Contact your supplier to get the password, fill it in, then click the green button.


5.When use it, if it appears this dialog box, please choose “ don’t display this message again”, then click the green button to confirm it.



Done! Have fun with Mutidiag J2534!

Free Download V4.5.0 VVDI2 Key Programmer Software (2017-09-08)

srijeda , 13.09.2017.

V4.5.0 VVDI2 Full software update is OK Sep 8th,some customers gave feedback that link is not OK to download,you can check on vvdi2 older version to get newest version,or you can download from the link we offer now,tested OK to download.



1.Free Download V4.5.0 VVDI2 Key Programmer Software (2017-09-08)

https://mega.nz/#!q1RmQDwA!Kj_eZqe-IWxsGMnQF7Dc5mw5TKKFXPC132SNxXoa27w

How to: Lexia 3 work with Actia Multidiag VCI

Question: Lexia 3 software can work withMultidiag VCI? Lexia 3 interface work with ActiaMultiDi@g software?

Answer: Perhaps yes.

Part 1: Lexia 3 compatible with Multidiag software?

- Multidiag works ONLY with VCI1 and VCI2 ACTIA INTERFACES . Nothing else.

- Iirc the opposite is possible: the multidiag vci can be used with the lexia software.

- Yes, Multidiag VCI can be used with Lexia SW

- the interface of lexia 3 work in multidiag software:

PSA Evolution XS KIT or Lexia Interfacework with MultiDi@g Office S/W = NO AT ALL!!!!!
The opposite = YES!!! Actia MultiDi@g PassThru Device CAN works with Lexia & PPO S/W's (via special Firmware flashing).....

Part 2: How to use Actia PassThru device with Lexia 3 (Citroen) andPPO (Peugeot) software

1. Install Lexia 3 and PPO software.


2. Run LexiaWithPassThruXS.exe and PPOWithPassThruXS.exe to make Lexia 3 and PPO to work together with Actia PassThru device.


3. Install PassThru drivers (latest version available from

http://www.passthruxs.com/download.htm)

4. Run FlashPassThruForLexiaPPO.exe to install necessary tools. After it you will see 2 new

shortcuts on your desktop:

5. To be able to work with Actia PassThru device in Lexia 3 and PPO software you need to reprogram (flash) device. Connect device to PC with USB cable, power it on by connecting to the car or via OBD. Double click on PassThru for Lexia PPO. Welcome screen will

appear:

6. Select USB, “1st Device”, then press Next. Follow instructions on screen. You should see this screen:

7. Press Next to start flashing process. After it finishes, reconnect the device. In Device Manager you should see USB PassThru Driver ( Multi-instance ). Now you can start Lexia or PPO software and diagnose your car.

8. When you want to switch back device to normal mode (to be able to work with MultiDiag Office or with PassThru software) you should reprogram device back to its original state. Connect device to PC using RS232 cable (USB cable will not work!!), power it on, then run from the desktop PassThru restore and follow instructions on screen. You should see this screen:

9. Press Next to start flashing process. After it finishes, reconnect the device. In Device Manager you should see now PassThru+ XS USB. Now your device is restored to its original state.

Why should i buy Galletto 4, Kess v2 and Ktag together?

ponedjeljak , 11.09.2017.

Product	Kess V2 V2.22	K-tagV2.13	Fgtech v54 Galletto 4
Function	read and write the Data of Engine ECU	read and write the Data of Engine ECU	read and write the Data of Engine ECU
Support  Vehicles	Cars and part Bikes	cars, trucks,traktors and bikes	Car, Truck, Motorbyke, Marine
Support Protocols	With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850	Available Protocols for K-TAG: BDM MOTOROLA MPC5xx	NEW JTAG – BDM – MOTOROLA – FREESCALE – INFINEON
Method	Via OBD2	Via BDM	Both via BDM and OBD
Update	Update via Hardware	Update via Hardware	NO
Token	No tokens limitation	No tokens limitation	No
Language	English, German, Spanish, Italian, Portuguese, French	English, German, Spanish, Italian, Portuguese, French	English, Italian, German, French, Spanish, Portuguese, Czech, Turkish
EDC17	work with a small part	work with a small part	work with a small part
Additional remark	1)  Most customers use FGTech Galletto 4 V54. Some users prove fgtech2 v52 works 50% obd. BDM works ok and work ok with tricore and st10 micros. Fgtech galletto not disappoint them never. 2)   KESS V2 has Anti-mediation lock module, it can do new and encrypted cars better than Fgtech. Remark: no one is perfect, maybe is good to have more than one tool, but much better is to have one good tool.

How to use VVDI MB BGA tool change EIS For MB 207 all key lost

About Mercedes Benz 207 all key lost, you need to change EIS

Tools you should buy - VVDI MB BGA TOOL:

Support all key lost
Mainly used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions

support renew EIS and ELV,support write EIS and ELV

More Detail functions:

http://www.xhorsevvdi.com//xhorse-vvdi-benz-vvdi-mb-bga-tool.html

Steps?

Firstly, we need to read EIS old data.

1. Click "Read EIS data", tick off "allow user", then enter Key pass, then click "Save EIS data" to the "207 all key lost" folder, follow the prompt to finish the following procedure.

2. Prepare key file. Click "Load EIS file" then "Prepare Key File"

3. Make new key.

1) Click "Read Write Key" and insert key into EIS;

2) Click "Identification key", reading data success and you will see key is unuse, it is a new key.

3) Click "Load key file" and select "Key1_801DDA38_used_015" to open.

4) Click "Write". Writing success and click "Identification key"



5) Change EIS.



6) Click "Read EIS data", you will see the key1-key8 is new. Then click "Load EIS data"



7) Choose EIS VIN again and click "Write", click "Read EIS data" and remove the tick before "Activated", then insert new key into the EIS.



8) Click "Read EIS data", meanwhile tick off "Activated", you will see Key 1 is used.

Okay, the Xhorse VVDI BGA tool changes EIS successfully.

VVDI Prog Read Motorola MC9S12 MCU Successfully

VVDI Prog Programmer software can support to read Motorola MC9S12.And here is specific chip type:MC9S12XEQ384_UNSECURED.

1.VVDI PROG connect with computer.Start VVDI PROG software,choose MCU MC9S12 type and chip MC9S12XEQ384_UNSECURED.



Security Byte Address: 0x5FF0F
Unsecured State: 0xFE(xxxx xx10)
Erase the P-FLASH will set the security byte as 0xFE
The program automatically detect D-FLASH and EEE memory size
Mask:2M25J ID:C482
Mask:3M25J ID:C482
Mask:0M12S ID:C483
Mask:1M12S ID:C483

2.Check "connection diagram",do like diagram shows.



3.Choose "read" in the software.



Partition information error,please select partition size manually.





4.Read successfully,then press Save,save the data you have read.



5.Operation success.

Actia Multi diag truck, download, price, review

subota , 09.09.2017.

It’s about Actia Multi diag 2017 2016 2015 2014 2011 download, price, truck, review. Here you go.

Part 1: Actia Multi diag download

Actia Multi-Diag 2017 download:

https://mega.nz/!945lXbKY!D_x6TYkrAUPkbmtdxd-JhZg1992ztR92OYgdmrI6gr4

2016 2015 2014 multi diag access j2534 download:

https://mega.nz/F!WUEnXK7I!M8Wg4MHBX0jLFTeRBoXz1w

Part 2: Actia Multi diag price

It is for those who don’t care about items clone or genuine.

obd2diy offers actia diagnostics software crack but tested no issues, working the same as the original.

(Newest) Actia Multi-Diag 2016: €218.00

http://www.obd2diy.fr//2016-1-multi-diag-muller-access-xs-valise-diagnostic.html

(Hottest) Actia Multi-Diag 2015: €209.95

http://www.obd2diy.fr//i-2015-multidiag-access-multi-diag-j2534-actia.html

Actia Multi-Diag 2014: €164.95

http://www.obd2diy.fr//i-2014-multidiag-access-multi-diag-j2534-obd2-valise-diagnostique.html

(Cheapest) Actia Multi-Diag 2011: €144.95

http://www.obd2diy.fr//nouveau-v2011-multi-dig-multidiag-actia-j2534-pass-thru-obd2-device-2291.html

Note: No need Actia Multi diag keygen!

Part 3: Actia Multi diag trucks

multidiag.com says their multi diag access j2534 supports all major truck brands (tractors and electronic equipment trailers), buses, coaches and commercial vehicles: Mercedes, Iveco, Renault Trucks, Scania, Volvo, Man, Nissan, DAF, Volkswagen, Askam, Avia , Ford, Freightliner, International, Kenworth, Mack, Peterbilt, Bova VDL, Setra, ERF, Knorr-Bremse, Wabco, Haldex, ...

But engineers working for http://www.obd2diy.fr/ has never tested successfully. If you wanna try it on a truck, good luck.

Actia Multi-Diag France tested on cars below:
Alfa-Romeo, Audi, Autobianchi, BMW, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daewoo, Daihatsu, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Lada, Lancia, Land Rover, Lexus, Maybach, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Proton, Renault, Rover, Saab, Seat, Skoda, Smart, SSangyong, Subaru, Suzuki-Santana, Toyota, Volkswagen, Volvo, Zastava…

and the following systems are confirmed to work ok:

injection, ABS, ESP, Airbag, automatic transmission, air conditioning, central computer, dashboard, comfort systems, tire valves, immobilizer, direction, steering, etc…

- Reset maintenance indicators.......Worked
- Read/Erase fault codes.......Worked
- Read parameters (graphical representation).......Worked
- Test actuators.......Worked
- Configure the calculator.......Worked
- Coding (Injectors, electronic tire valves...).......Worked
- Calibration and self-learning.......Worked

- and other functions worked

Part 4: Actia Multi diag review

(big thanks to the customer share lots of photos)

First I used Muti diag software on a BMW MINI 2011. One client took his car to my garage because the airbag light constantly flashed. I tested it with VCI but no code stored. I checked some other parameters and all fine. Then I disconnected the battery, and did a battery reset for half an hour. The SRS light went off finally.

 



Then I run muti-diag access on BMW E90. Read and cleared fault codes of engine injection mevd17kw n55. Lots of sreenshots i took this time, for share. It will better to help all know Muti-diag.



Enjoy!

* Big thanks to all contributors for Actia Multi diag 2017 2016 2015 2014 2011 download, price, review.

VVDI2 BMW Program BMW CAS EWS IMMO Key

srijeda , 06.09.2017.

VVDI2 BMW support to program BMW EWS and CAS by OBD,EEPROM Dump file.If OBD way not available,please use VVDI Prog to read eeprom dump file from immo,then use VVDI2 BMW to program new key.Here we will introduce some basic knowledge about BMW immobilizer system,and which tool is suitable for your BMW car models.



1.VVDI2 BMW Program BMW CAS EWS IMMO Key

BMW MULTI Tool also can support,but bmw multi tool firmware and software stop updating any more.VVDI2 BMW fully replace BMW MULTI Tool.



If OBDII Way,CAS Plug way not support,please use VVDI Prog to read eeprom dump file.

The following pic is VVDI PROG BMW Immobilizer support chip.



2.How do you know BMW EWS and CAS type?

BMW Car brand is generally divided into two categories: EWS and CAS.

EWS immo:EWS1,EWS2,EWS3,EWS4
CAS immo:CAS1,CAS2,CAS3,CAS3+,CAS4

1.1.We distinguish by car year.

1) 2000-2003/04 BMW 3 series, series,7series straight shank remote control key is EWS system.



Here is some pictures for BMW EWS:

EWS2



EWS3 MC68HC11 (0D46J)



EWS4 MC9S12D64 (2L86D)



In CAS1 system, there are many different type,but the most usual one is the old  7 series. MC68HC12DG128 (0K50E) module like pic shows:



2)2004-2006 BMW 3 series, 5 series, Z4, X5, X3 CAS2 system.

CAS2 9S12DG256(2K79X)



BMW CAS3 MC68HC9S12DX256 0L15Y



And one more another straight shank remote control key (similar to Land rover key) with BMW logo with black color, which is also CAS2.

3)CAS3: BMW 3 series, 5 series before 2010 year.

CAS3+ BMW 3 series after year 2010

CAS4: BMW 5-series after 2010, BMW 1-series after 2011

BMW CAS4  5M48H 1L15Y 1N35H



1.2 Check BMW Key Type
CAS1:BMW 7series should insert the smart card into the slot and press start key.

CAS2:straight shank remote key.

CAS3:If BMW key needs insert smart card into the slot and press one key start vehicle, almost these keys are before CAS3+, and higher possibility of BMW CAS3.

CAS4:This new key no need to insert the smart card to slot, one key start.

 

PSA-COM Bluetooth Review: Diagbox is better!

PSA-COM Bluetooth is a fake Chinese thing!Go to Lexia 3 Diagbox!!

There are some new products advertised over china websites about a new tool for PSA-COM, a Bluetooth connector, they say is latest thing for Peugoet citroen that can use Diagbox software via Bluetooth.

Ireceived this connector and a software "SuperScan Manager" from ASM-X company ( don’t know about it ).



Irip it apart and join pin 13 with pin 4 then i have a cool looking dongle with some flashing lights to sync toyota immo box with ecu (well that would only be the expesife version of a paper clip)

i have seen some of this type of tools doing its appearance on china sites , i was not really convinced it works but now i confirm it

Finally its good for nothing.

PSA-COM is a copy DEC solo psa,Diagbox is the best diag !

Take care .

Free download ACTIA Multi-Diag I-2017 2016 2015 software

ponedjeljak , 04.09.2017.

Pay attention mates!

Here you can free download latest ACTIA Multi-Diag 2017 truck software!

And also ACTIA Multi-Diag 2016 2015 previous versions available.



ACTIA Multi Diag I-2017+ SP2+ SP3 Download Free, No Pass:

I-2017 39.08

I-2017 SP2 39.21

I-2017 SP3 39.31

https://mega.nz/#!945lXbKY!D_x6TYkrAUPkbmtdxd-JhZg1992ztR92OYgdmrI6gr4

Year / Release Date: 2017

Version: 39.31

System requirements: Microsoft® Windows® XP 32-bit SP3 and higher

1 GHz processor

1 GB RAM (2 GB recommended)

Language: Multilingual

Tabletka: absent

2017 ACTIA Multi Diag Software Notice:

--Program for diagnosing passenger cars, works only with its adapter.

--When choosing the type of installation, choose the standard installation.

--Remember disconnect the Internet !

--Download and try with your own risk, ACTIA Multi Diag 2017 haven't been tested.

-- TESTED 100% working Latest ACTIA Multi Diag software?

Actia multi-diag access j2534 I-2016 No need activation!

(ACTIA Multi Diag Interface+ ACTIA Multi Diag 2016 CD)



Download ACTIA Multi Diag software 2016 2015 2014 if you need:

https://mega.nz/#F!WUEnXK7I!M8Wg4MHBX0jLFTeRBoXz1w

1. Actia Multi-Diag CD versions 6.1,6.3&7.3


2. Actia Multi-Diag Trucks 2011


3. Actia Multi-Diag I 2015 v.33.06+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop + KG


4. Actia Multi-Diag II 2015 v.34.07+Service Pack 1 v.34.11+Service Pack 2 v34.21


5. PassThru programs,drivers and instructions on how to install them.


6. Added Original MDO adapters pinouts thanks to user Twist


7. Actia Multi-Diag III 2015 v.35.09+Service Pack 1 v.35.11+Service Pack 2 v.35.21


8. Actia Multi-Diag I 2016 v.36.05+Service Pack 1 v.36.11+Service Pack 2 v.36.21+Service Pack 3 v36.31+Service Pack 4 v36.41

Note:

This works with original and clone ACTIA Multi Diag interface. It all depends on your interface serial number. Some serials are limited to certain versions, others are not. Good luck!

Note: Big thanks to fantomel. If you need password for a file, always try: fantomel

Free Download V4.6.1 VVDI PROG Software (2017.08.30)

VVDI PROG V4.6.1 is released on Aug 30th,and it adds 3 adapters which are need to buy separately.You can check VVDI PROG EWS3 adapter,EEPROM CLIP ADAPTER,VVDI PROG D80/M350803 adapters.







1.Free Download V4.6.1 VVDI PROG software:

https://mega.nz/#!jxBFTCwb!jsFwimypcOIkrKhEheg8H3xmYutUspvtAxtK37exgy4

Password:123456

Notes: about eeprom clip adapter

(NO need soldering) or EWS 3 adapter,please contact dealer for help.



2.VVDI PROG V4.6.1 update information:
v4.6.1 (2017-08-30)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.1version in Doc folder
* Fix MC9S12XS/MC9S12XHY series PFLASH write error problem
* Fix SRS-VW52-V1 diagram
+ Add AT24C01(CLIP),AT24C02(CLIP), AT24C04(CLIP), AT24C08(CLIP), AT24C16(CLIP), AT24C32(CLIP), AT24C64(CLIP), AT24C128(CLIP), AT24C256(CLIP),
AT24C512(CLIP), AT24C1024(CLIP), AT25010(CLIP), AT25020(CLIP), AT25040(CLIP), AT25080(CLIP), AT25160(CLIP), AT25320(CLIP), AT25640(CLIP), AT25128(CLIP),
AT25256(CLIP), AT25512(CLIP), AT93C06[A](CLIP), AT93C46[A](CLIP), AT93C56[A](CLIP), AT93C57[A](CLIP), AT93C66[A](CLIP), AT93C76[A](CLIP),
AT93C86[A](CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add CAT24C/W01(CLIP), CAT24C/W02(CLIP), CAT24C/W04(CLIP), CAT24C/W08(CLIP), CAT24C/W16(CLIP), CAT24C/W32(CLIP), CAT24C/W64(CLIP), CAT25C128(CLIP),CAT25C256(CLIP), CAT93C46[A](CLIP), CAT93C56[A](CLIP), CAT93C57[A](CLIP), CAT93C66[A](CLIP), CAT93C76[A](CLIP), CAT93C86[A](CLIP) options in<1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add XL[S]24C01(CLIP), XL[S]24C02(CLIP), XL[S]24C04(CLIP), XL[S]24C08(CLIP), XL[S]24C16(CLIP), XL[S]93C/LC06(CLIP), XL[S]93C/LC46(CLIP), XL[S]93C/LC56(CLIP),
XL[S]93C/LC66(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add FM24C02(CLIP), FM24C03(CLIP), FM24C04(CLIP), FM24C08(CLIP), FM24C09(CLIP), FM24C16(CLIP), FM24C17(CLIP), FM93CS06(CLIP), FM93CS46(CLIP), FM93CS56(CLIP),FM93CS66(CLIP), NM24C02(CLIP), NM24C03(CLIP), NM24C04(CLIP), NM24C05(CLIP), NM24C08(CLIP), NM24C09(CLIP), NM24C16(CLIP), NM24C17(CLIP), NM24U17(CLIP),NM24C32(CLIP), NM24C65(CLIP), NM93C06(CLIP), NM93C46(CLIP), NM93C56(CLIP), NM93C66(CLIP), NM93C86(CLIP), NM93CS06(CLIP), NM93CS46(CLIP), NM93CS56(CLIP),NM93CS66(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add 24AA02(CLIP), 24AA04(CLIP), 24AA08(CLIP), 24AA16(CLIP), 24AA164(CLIP), 24AA32(CLIP), 24AA128(CLIP), 24AA256(CLIP), 24C02(CLIP), 24C04(CLIP), 24C32(CLIP),24LC02(CLIP), 24LC04(CLIP), 24LC08(CLIP), 24LC16(CLIP), 24LC164(CLIP), 24LC32(CLIP), 24LC64(CLIP), 24LC65(CLIP), 24LC128(CLIP), 24LC256(CLIP),
93C/LC/AA46A(CLIP), 93C/LC/AA56A(CLIP), 93C/LC/AA66A(CLIP), 93C/LC/AA76A(CLIP), 93C/LC/AA86A(CLIP), 93C/LC/AA46B(CLIP), 93C/LC/AA56B(CLIP), 93C/LC/AA66B(CLIP),93C/LC/AA76B(CLIP), 93C/LC/AA86B(CLIP), 93C/LC/AA46C(CLIP), 93C/LC/AA56C(CLIP), 93C/LC/AA66C(CLIP), 93C/LC/AA76C(CLIP), 93C/LC/AA86C(CLIP) options in<1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add M24C01(CLIP), M24C02(CLIP), M24C04(CLIP), M24C08(CLIP), M24C16(CLIP), M24C32(CLIP), M24C64(CLIP), M24C128(CLIP), M24C256(CLIP), M24C512(CLIP),M93C06(CLIP),M93C46(CLIP), M93C56(CLIP), M93C66(CLIP), M93C76(CLIP), M93C86(CLIP), M95010(CLIP), M95020(CLIP), M95040(CLIP), M95080(CLIP), M95160(CLIP), M95320(CLIP), M95640(CLIP),M95128(CLIP), M95256(CLIP), M95512(CLIP), ST24C01(CLIP), ST24C02(CLIP), ST24C04(CLIP), ST24C08(CLIP), ST24C16(CLIP), ST24E16(CLIP), ST24E32(CLIP), ST24W02(CLIP),ST24W04(CLIP), ST24W08(CLIP), ST24W16(CLIP), ST25C01(CLIP), ST25C02(CLIP), ST25C04(CLIP), ST25C08(CLIP), ST25C16(CLIP), ST25E16(CLIP), ST25E32(CLIP), ST93CS56(CLIP),ST93CS57(CLIP), ST93CS66(CLIP), ST93CS67(CLIP), ST93CS47(CLIP), ST93CS46(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add X24C01(CLIP), X5043(CLIP), X5045(CLIP) options in <1-EEPROM&FLASH>->(Need EEPROM CLIP ADAPTER)
+ Add ME7.4.5-FLASH-ST10F275, ME7.4.5-EEPROM-95320 options in <3-ECU>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add EWS3-KLINE(0D46J) option in <4-IMMOBILIZER>-> (Need EWS3 ADAPTER)
+ Add BCM-XEP100(2009--) option in <4-IMMOBILIZER>->
+ Add LAGUNA-UCT(2006) option in <4-IMMOBILIZER>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add BJ40-DASHBORAD, E150-DASHBORAD(2014), EX200-BCM(2016) options in <5-DASHBORAD>->
+ Add EQ-DASHBOARD(2017) option in <5-DASHBORAD>->