Free download 2018 Actia Multi-diag 42.09 software

četvrtak , 15.11.2018.

Finally I managed to make it work, I'd like to share you guys with version 2018 Actia Multi-di@g. I made the guide myself for my v2011 interface received from the supplier: http://www.obd2diy.fr//nouveau-v2011-multi-dig-multidiag-actia-j2534-pass-thru-obd2-device-2291.html

[caption id="attachment_14468" align="alignnone" width="800"] DCIM100MEDIA[/caption]

VCI 033918

Actia 1.2018 42.09 download free: https://mega.nz/#!croCEKIQ!7PHYKUAWkVqKBfc1DTzmQtJUEcYx9iQ0KsNLXrYi2ew

CRACK FIX download free:: https://mega.nz/#!YYhwGSKb!hAQaG7RunQLdoG7njQ1-FLp7HiYLX0CYqe53kEOrEXY

First of all, you must modify or buy a modified clone (it works with any cheap clone as long as the chip PIC12F629 is modified, mine is v2011 - the cheapest v2011 clone on the internet with max 140$ , reflashes or changes the chip entirely (idk) myself... works perfectly).

Link for guide if your chip PIC12F629 is not modified :

http://blog.obd2diy.fr/2018/11/12/free-download-actia-multidiag-2017-iii-sp4-hex-for-pic/

I bought my clone already chipped. I did not test with new VCI2 or other Actia versions. Feel free to test.

Installation instructions  - WORKS ONLY ON 32BIT (TESTED ON WINDOWS 7 SP1 X32)

@@@@@@@@@@INTERNET MUST BE OFF@@@@@@@@@@@

1. run ACTIA_NET_BLOCK.bat (Run as administrator if possible)


2. run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible)


3. Install Actia Multidiag Standard Profile(if the case, use S/N: 033918 instead of xxxxxxx)

RESTART COMPUTER after installation finished

3. Go to C:ACTIAPortal


4. Remove Wget.exe


5. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.


6. Install I+ME-Actia-PassThru-XS2G-Driverpack-2.8.1.14.exe

Then: (supplier told me it is optional, I have done it anyway)

1. Go to C:ACTIAPortalchromemultidiagcontentscripts


2. Open in a text editor file multidiag.js


3. Go to line "var showWarningPT1Window=true" and make this line like


4. "var showWarningPT1Window=false"

Done!

Note: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car

Note2: My supplier told me that it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and it is worth adding to collection!

Hope it helps.

Original:Free download 2018 Actia Multi-diag 42.09 software