Tool Needed for BMW IMMO, Mileage, Diagnosis

utorak , 10.07.2018.

Suggestion for those looking for a tool to do BMW key programming, mileage adjustment, diagnosis

Better buy separate devices, VVDI2 for key programming, Digimaster 3 for odometer correction, BMW ICOM for diagnosis.

VVDI2 for BMW key programming:

Ews 1-4, cas 1-4, fem/bdc



Digimaster 3 for odometer correction:

Digimaster3 BMW Car List (2000-2017 )
BMW Car Model	CAS1 912DG128 (3K91D)	CAS2 9S12DG256 (2K79X)	CAS3 9S12DG256 (0L01Y)	CAS3+ 9S12XDP512 (0L15Y)	CAS4 9S12XDP512 (1L15Y) 9S12XEP100 (5M48H)	FEM
BMW 1 Series		2004-2006 (E87)	2007(E87)	2008-2011 (E87)		2012-2014 (F20)
BMW 3 Series		2005-2006 (E90)	2007(E90)	2008-2012 (E90)		2013-2014 F30/F35
BMW 5 Series		2004-2006 (E60)	2007(E60)	2008-2010 (E60)	2010-2014 F07/F10/F11/F18	Not available yet
BMW 6 Series		2004-2007 (E63/E64)	2008(E63/E64)	2009-2010 (E63/E64)	2011-2013 (F12/F13)	Not available yet
BMW 7 Series	2001-2004 (E65)	2004-2008 (E66)			2009-2013 (F01/F02)	Not available yet
BMW X1 Series				2010-2014 (E84)		Not available yet
BMW X3 Series					2011-2013 (F25	Not available yet
BMW X5 Series			2007(E70)	2008-2013 (E70)		2014F15
BMW X6 Series				2008-2014 (E71)	Not available yet	Not available yet
BMW Z4 Series				2010-2013 (E89)	Not available yet	Not available yet

Note: Digiprog 3 vs. Digimaster 3

Both Digi3 and Digimaster should do the job. Digi3 is cheap and good, Digimaster is more like a professional tool, and of course costs much more.

BMW ICOM for diagnosis:


ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose for BMW all series and models from all systems.

ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules for BMW Group vehicles

KSD—for BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There`s also information about wheels and rims for the various models.

IToolRadar— Used to recognize ICOM, activate or release ICOM Port

ETK— Accessories Catalog

INPA— Engineer Soft-ware for E series, for diagnosis

WinKFP—Engineer Soft-ware for E series, for programming

E-sys — Engineer Soft-ware for F series (available for programming and coding)

and so on......