How to use CGDI Prog to program key on BMW MSV80 CAS4 /CAS 4+ all key lost?

petak , 12.01.2018.

Have BMW MSV80 and looking for a key programmer to add new key for BMW CAS1/CAS2/CAS3/CAS3+ and match key for CAS4 /CAS 4+ when all key lost, you must use CGDI Prog BMW MSV80 key programmer.



Attach one table which show CGDI Prog functions, workable models and working time



 

As you can see, CGDI Prog BMW MSV80 key programmer has these capabilities:

1. 1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, KEY all lost matching, CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching, support key all lost matching.

3.Support BMW key inspection, can check key what status in.

4.Support BMW engine computer DME replacement.

5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exclusively support in Domestic

6.Support BMW Key unlock.

 

Moreover, CGDI Prog can perform:

1.Update in real time, products updated in zero cycle time, support model added in real time.

2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer, ISN code reading and writing.

3.Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.

 

How to use CGDI Prog BMW MSV80 key programmer?

Method 1: can directly read ISN code in the car, please ensure the car voltage is 12V and above, it directly connects OBD to operate, takes about 5 minus.

Method 2: can directly disassemble engine computer (DME) to operate, follow the below guide to connect the line: