Where is the LED floodlight mainly applied

10.09.2013.

The lighting for present, it is not just a simple lighting, the professional lighting also must be use d in certain circumstances, for example in order to show advertising effects, and for example, the lighting required for the photographs and photographic, etc., all of which must have professional lighting, LED floodlight is currently the tool that is the most widely used under the special scene, precisely because it not only has a very good strong light, but the light manifested is not only harmless, most importantly, its light is very soft and beautiful.

20

Now this LED floodlight is of high utilization rate in the modern city, squares, parks, stadiums, hotel door, outdoor advertising, etc., where the LED floodlight is applied for large area, except where these specialize in art lighting fixtures need to use LED floodlight, in addition, there are many architectural sites and gas stations where the LED floodlight is chosen, because its brightness is very strong, which is able to guarantee a good night operations., in addition to its light and strong performance, but also because it is showing the greatest security when used,which is why It’s popular in the outdoor lighting.

Because the Light body of the LED floodlight is made of high thermal conductivity aluminum alloy material and surface electrostatic spraying high heat dissipation material so that the heat the LED floodlight generate is very less, which is very important and also must be noted in some dangerous situations, there are many night-time operation, but it is also flammable environments, such as oil well and gas stations, the choice of lamps is also very important in the most common place,which have very strict requirements for the heat, other lamps naturally can not meet this requirement, but the LED floodlight is precisely because there advantage in this respect, so will be the first choice under these flammable environment lighting.

Nowadays,the LED floodlight such and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED floodlight is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED floodlight, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED floodlight and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection. Login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/where-is-the-led-floodlight-mainly-applied/

Oznake: LED light, LED floodlight, Light body, outdoor lighting, light source, thermal conductivity, AC, brightness

What need to be paid attention to when installing LED tube light

09.09.2013.

What need to be paid attention to when installing LED tube light? LED is current source, the rectifier and starter is generally not needed; the inner of the LED tube light T8 is large enough, the constant current source can be installed inside the tube. During installation, the original rectifier, starter can be removed for unused, the lamp can be directly installed. Also, the LED tube light installed is a directional lamp. The opposite direction, the lamp is not lit. The electrical expert are considering adding some conversion circuit, so even if in the case of the lamp installed backwards, the lamp also work.


LED tube

Pay attention to the voltage when installing, although there are wide voltage adaptability for the LED tube , it both can work at AC 85V – AC 245V. But voltage is too high or too low for long tine, which will affect the power factor of the constant current source, that is will cause a slight impact on energy efficiency. It would also impact on the life of the constant current source. Therefore, the LED tubes whose voltage is appropriate should generally be chosen. Such as: the electricity is 110V, the LED tubes specially designed for 110V should be used.

Another that should be noted is heat dissipation, LED tube light is equipped with the aluminum heat housing, under normal circumstances, the heat is not a problem. However, if used in a place where the dusty is heavy, the dust shall be regularly removed to prevent dust covering the radiator, result in affecting the cooling.

The waterproof is also very important, because the LED tube light is made by the upper and lower two parts: the upper part is the aluminum radiator, the lower part is the diffuser, there are gaps in the joints, therefore, fumes, water vapor must be prevented from entering. If you used wherever the fumes, vapor is heavier, preferably with a protective cover. General protective cover on it.

One last thing is the anti-vibration, LED tube light has a strong anti-shock capability. Long as not the violent impact, which usually does not cause damage. But it may makes certain effects on the soft board. The traditional fluorescent lamp is made of glass, and the inner is almost vacuum, vibration could cause an explosion, with particular attention to vibration.

Nowadays,the LED flood lamp and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood lamp is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood lamp and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/what-need-to-be-paid-attention-to-when-installing-led-tube-light/

Oznake: LED tube T8, tube light, constant current, AC, LED flood light, heavy metals

Wonderful design:rechargeable portable LED floodlight for camping and travelling

05.09.2013.

When traveling, camping, outdoor adventure, we are always needing the emergency lighting and still troubled by not having good lighting? The illumination range and intensity and illumination time of the Flashlight is so narrow and weak and short that it is too difficult to fundamentally solve the puzzle of lighting outdoor,, we urgently need the lighting that is of a wide range of illumination lighting a long time and high brightness for the activities such as camping, LED rechargeable portable floodlights is just our best choice!


Only needed 4-5 hours charging, the rechargeable portable LED floodlight such as the 10W portable LED floodlight can provide 3 to 4 hours lighting, although the lighting time needs to be improved, but the lowest 850LM lighting intensity and humane carry handle and simple, beautiful and stylish appearance is enough to make up the little less, using COB Bridgelux chip as light source, ensuring the light fades that is less than 3% at 3000 hours, at – 20 ~ 55  working environment and – 40 ~ 85  Storage environment, light theoretical life is up to 50,000 hours so that avoid the trouble of frequent replacement of lamps, we know that where we are camping and traveling outdoor is often remote environment, what we are most worried about is lighting time and lifetime, choosing a long-life lighting tool is crucial, although the illumination time of the LED flood light is not long enough, but we can use DC12V vehicle power supply that is the power endurance, using the LED principle as the illumination significantly increase the lamp life, there is no doubt that this rechargeable portable LED floodlight is ideal lighting outdoor, while, IP65 degree protection can guarantee that this rechargeable portable LED floodlight is fully capable of waterproof, dustproof, which is the same as the ordinary LED floodlight that is preferable to outdoor environment! The following instructions and tips we need to pay attention to is described for us to better use the light.

Instructions for use

1. when charging or prolonged use,directly access the charger to AC (85 ~ 265V ,50-60Hz) or DC12V car power supply.

2.do not connect the charger, the battery can work 3-4h under the fully charged circumstances.

3 Access the charger, turn on the switch button for the sustainable use.

4 Connect the charger to turn on the switch for properly working, if a sudden power outage, the lights can be automatically converted into an internal lithium battery-powered, no flash, not stop, continuing to work properly.

5 the voltage is less than 36V safe voltage when the portable lamp is used.

Tips

1.To ensure safety, please entrust electrical professionals to operate when maintaining and inspecting the lamps, non-professional maintenance checks prone to danger.

2.The lamps must be supporting the use of the specified charger.

3.Do not use in hot or humid places, in order to avoid damage to the lamps.

4.fixture should not be covered by insulating gasket or the similar material at any time.

Browse http://www.lead-lighting.com for more detailed and professional features and vivid uses of the LED light .

Resource from http://www.lighting-ledlight.com/index.php/wonderful-design-rechargeable-portable-led-floodlight-for-camping-and-travelling/

Oznake: LED flood light, illumination, Flashlight, rechargeable LED light, outdoor, AC, charger, power outage, light source

How to install the LED strip lights

03.09.2013.

Whenever the Christmas and New Year these grand festive come, the various buildings and trees and flowers are beautiful s with gorgeous dress against the backdrop of the LED strip lights, apparently, LED strip lights have been used as excellent decorative lamps into our lives, but, for most of us, it is not clear how to install LED strip lights, here I will guide you how to install the LED strip lights.

Scope

LED strip, LED light bar has been widely used in furniture, automotive, advertising, lighting, ships and other industries.

Installation Method

` the bandwidth of four wire LED strip lights is about 22mm, the thickness is about 8mm, the weight is about 0.25kg / m (4 meter by Kg)

athere are a total of four wire conductors for the LED strip lights, three rows of lights (note not the four rows of lights), there is 1 meter and 24 lights in each row, 24 * 3 = 72. Because the power of each lamp beads is 0.05W, the power of the 72 beads LED strip light is: 72 * 0.05 = 3.6W.

bthere is the “scissors” mark per meter , only to have to cut on the tag, the scissors cut or the wrong side will lead to that one meter does not shine! Some miss a few because of hitting the mark, it is best to look the mark position carefully before you cut, according to the middle of no where connections to be cut, which can be carefully seen.

c Each strip light must be fitted with a special plug (a plug with a transformer); connection sure to remove the clear plastic cover, and don’t cover until the light is connected and tested. Must not be directly connected with the cover, the short circuit is easy to occur!

When the strip lights is installed, it is generally put on the light trough, and put straightly is OK, you can also use string or thin wire to fix. For the exterior or vertical loading, a clip and a tail plug need to be purchased . The genuine clip is fully transparent, preferably mark with the waterproof glass glue after the installation in the tail plug and the plug, so better waterproof.



Having Known the process of installing the LED strip lights , we will avoid a lot of mistakes and trouble, but LED strip light is just widely used wherever the festivals and dances,party,club , celebrations activities are are hold , LED flood light such as the portable 10W LED flood light and the LED tube are the protagonist applied in ordinary outdoor lighting and indoor lighting,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,

Meanwhile,there are a large number of factories engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf http://www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/how-to-install-the-led-strip-light/

Oznake: LED tube light, LED flood light, outdoor lighting, light source, New Year, Christmas, AC, dc

Why LED light is not so popular in the 19802s

02.09.2013.

Because which lighting 802s used to contacting is fluorescent lamps, particularly the 802s in China , the fluorescent lamp is everywhere from the classrooms and dorm at school to the home, and LED lighting is the third generation of lighting that relatively lately developed, it was just applied in the form of the indicator lights in 19602s , now with LED lighting technology improved, it had not been applied as the lighting that is based on the light-emitting diodes until the 1990s, in the early 2000s, as the LED technology further improve and people’s awareness of energy saving and environmental protection enhances and the countries have prohibited the use of incandescent bulbs around the world, LED lighting has won the unprecedented development, so for the 19802s, we are generally 20-year-old that is too late to understand what is the LED lighting, moreover we have already accustomed to using the fluorescent lamps, there is a new process for us to accept the LED lighting,

However , all of which does not prevent the promotion and popularization of LED lighting, because of the excellent energy saving features and soft light, colorful and other outstanding advantages,it has widely used in decorative lighting, scene lighting, backlighting, etc. lighting field, especially the LED flood light such as the portable 10W LED flood light and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,


Meanwhile,there are a large number of factories engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf http://www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/why-led-light-is-not-so-popular-before-the-1980s/

Oznake: LED flood light, LED tube light, light source, China, environmental protection, energy-saving, AC

What must be taken care for the power of the LED street lights and LED tunnel lights

01.09.2013.

The power of the LED street lights, LED tunnel lights belongs to a class of electronic products for use outdoor, the poor working conditions puts forward strict requirements on the reliability of its work.. Surveyed and judged according to the failure analysis of the LED power , in addition what’s the factors resulting in the power failure is their own , a good power supply environment and the proper installation make a great impact on the reliability of the LED street lighting and LED tunnel lights such as the 60W LED tunnel lights, the following is need to be paid focus attention to when the LED drive power is installed and tested and used.



1 Product Description 1.1 the AC input line is the three cores , namely L, N, G test , connect the wiring and energized according to what the specifications requires ( Note: the input and output terminals of the power must be sure before the test , so as to avoid that the input voltage is directly applied on the output power ,resulting in the burned ) .

1.2 Ensure that the input voltage within the specified range of the product specification, prohibited that input voltage exceeds the scope of the requirements .

1.3 before the energized test , make sure all cables are connected properly : Ensure that the AC input line , the constant current output line and input line , constant current output line fully contact with the fixtures ( or load ), prevent poor contact caused that the test results is no exact, seriously , it may cause damage to the product .

1.4 Before testing , make sure that the load specifications , the input voltage and 1.3 is correct, then connect the AC power source.

1.5 input, output high voltage test , s the high voltage output terminal of the high-pressure machine must be connected to the L, N of the AC input line , and connect the low- end ( or the constant voltage module output ) to the fixtures, and make sure fully connect.

1.6 high-pressure test , make sure that the test voltage is within the requirements of the specifications , the test voltage that exceeds the standard requirements is strictly prohibited .

1.7 Before the test, the voltage of the high-pressure machine shall be adjusted to “03 V, mustn’t Power-on the booster until make sure that the setting of the test voltage and 1.5 is correct,then adjust the test voltage from ” 0 “V to the desired test voltage within 5-10 seconds.

Note: Do not instantly apply the test voltage on the product tested .

1.8 for the input to ground test , the high voltage output terminal of pressure machine must be connected to the L, N of the AC power line , and low pressure side terminating at cover screws of the constant module , and make sure fully connect . When testing, operation according to 1.7.

1.9 The user performing light aging , make sure the cable connection is fully guaranteed , and the input voltage are controlled within the range of allowable input voltage of the products, and prevent the large voltage consecutive beats .

Having known what should be paid attention to when we install the power of the LED street lights and LED tunnel lights,choosing the qualify LED road light is surely the key,there are a large number of excellent manufacturer engaging in researching and producing the LED street lights and the LED tunnel lights,of which Shenzhen Lead lighting is just one, the customer satisfaction and outstanding energy saving effect is the biggest encouragement of the company , Lead lighting has always been committed to R & D and production of more environmentally friendly energy-saving LED street lights, LED tunnel lights, LED High Bay Light, LED Flood Light, LED Panel,LED Ceiling Light etc with OEM&ODM service. As an ISO 9001:2000-certified factory, it can meet the strict standards of CE, RoHS, FCC certificate, these strict producing standards guarantee our products distribute smoothly both in domestic and international markets.Just browse http://www.lead-lighting.com/products/bid32-1.htm for the comprehensive performance and features of the LED tunnel lights or return the homepage for other vivid and awesome LED lights.

Article from http://www.lighting-ledlight.com/index.php/what-must-be-taken-care-for-the-power-of-the-led-street-lights-and-led-tunnel-lights/

Oznake: LED street lights, AC power, LED tunnel lights, RoHS, AC, ISO 9001:2000, LED flood light, G test, power supply, FCC

What are the advantages of the LED flood light by comparison with the traditional floodlight ?

30.08.2013.

There is the essential difference between the LED floodlights and conventional floodlights, but which is not enough to explain why the popular LED Spotlights, So what exactly advantages that the LED flood light by comparison with the traditional Spotlights?

1, the housing of the LED Flood light will never rust, never corrosion, the use of high-tech spray technology and lightweight alloys manufactured.

2, use the internal and external anti-earthquake structural to design, which effectively prevent some emergency situations caused due to strong vibrations of the LED Flood light , such as the bulbs off, stent fracture, shorten lamp life and other issues.

3, LED chip as the light source of LED floodlights, the life of LED is up to 100,000 hours, is particularly suitable for unguarded outdoor lighting of a large area.

4, the overall cooling effect is good , and can reduce the failure probability of LED floodlight.

5, LED flood light is cast by the piping and other new technology, reliable seal, waterproof and dustproof, ensuring the overall effect of the shell of the LED flood light casing is good.

6, LED Floodlights with good electromagnetic compatibility, avoid electromagnetic interference on the surrounding environment. It is the best lamp applied to the airports and open air demanding on the electromagnetic radiation.

Nowadays,the LED flood light and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/what-are-the-advantages-of-the-led-flood-light-by-comparison-with-the-traditional-floodlight/

Oznake: LED light, LED tube light, light source, outdoor lighting, stroboscopic effect, LED flood light, AC, dc, electromagnetic radiation

Amazing:just waving you finger to light up the LED light

28.08.2013.

There is a new cabinet lights in a design shops named Dreiplus in Germany, called AREA, it is unique in that only need to wavinga few fingers, you can light or extinguish LED lights.

There a large number of very long LED in the LED tube light, and each is individually controlled, which can specify how much the amount of illumination according to the user needs. Just use your fingers waved, the corresponding LED will light up, so the longer the length of swing, , the more the LED tube light, the greater the amount of lighting. These LED tube lights use the warm white light that very energy efficient. So if you want to eat snacks but are worried about disturbing others because of getting up , then just light up a short.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Resource from http://www.lighting-ledlight.com

Oznake: AC, dc, Germany, heavy metals, illumination, LED tube light, LED flood light, light source, stroboscopic effect

How to repair the LED light

27.08.2013.

As people’s living standards improve,more and more families choose energy saving LED lamps, LED crystal lamps, LED flood light, LED energy-saving lamps and other LED lighting fixtures, but with the increased use of time we will inevitably encounter that the LED light is damaged, so today I share with you how to repair the damaged LED lamps, this experience is suitable for all LED lamps.

Tools / materials

Multimeter

Methods / steps

1.First, we must ensure that there is no problem with the circuit of the LED lamp in our own families, the main problem is that the switch has gone wrong , the switch is the focus of our detection.

2.Check the the power converter on the back of LED lights (that white box that is in the figure is the power converter), for this,the converter would be directly removed, and powered with a multimeter to measure the voltage or current, if the power converter is damaged,which can be directly purchased for the replacement, it is generally very cheap.

3.If there is no problem with the LED power converter,then we can cut the multimeter to the voltage output gear, and then place in the corresponding positive and negative point of the LED lamp to look up it will be lit or not. Replace it If it is can’t be lightened up.

4.Generally speaking, after the above three steps,60% of the LED lights problem can be solved, so our LED lights should be able to re-radiate the glory.

Precautions

Because LED lights are high-tech products and require a 220V power,we must pay attention to protection against electric shock during maintenance, and if you have doubts on the maintenance ,please check the reference material the qualify manufacturer and supplies offer.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/how-to-repair-the-led-light/

Oznake: LED lamps, LED tube light, LED flood light, Multimeter, power converter, light source, energy-saving, AC, dc

Which LED lamp bead of the LED tube light is better

Because LED tube light is known as energy saving and high brightness, moreover the prices have been gradually reduced, so LED tube light enjoys a increasing popularity, but there are vastly different LED tube light on the market, which one is better in the end,then that let me share with you!

Tools / materials

As we all know, the 3528,3014 we often said refers to a package size of lamp beads, 35 refers to that the length of the long side of the lamp beads is 3.5mm and 28 refers to that the length of the short side is 2.8mm, and so on.

Types of lamp beads:

1.The first generation: straw hat lamp beads,which is the indicator we are used to see, the single brightness is low and the power is small,what the significant feature of the LED tube light produced is that the number of the lamp beads are over many,

2.The second generation: 3528 SMD As technology advances,the straw hat lamp beads is gradually replaced by 3528, power increases, single brightness can reach 7-8 lm,the lamp beads is also much more,resulting in the disadvantage that is the high failure rate.

3.Third Generation: 3014 SMD thanks to the emergence of the 3014,the price of the LED fluorescent decreases, the power of a single lamp beads is up to 0.1W, the single brightness is 12-13 lm that is nearly 50% higher than that of the original lamp beads.

4.Fourth Generation: 5630 SMD The advancement of the manufacturing technology born the 5630, single power is 0.5W and single brightness is 50-60lm, the emergence of 5630 rapidly industrialize the LED tube, the energy-saving effect is widely used in factories, hospitals and other long lighting.

5.Fifth Generation: 3020 SMD the emergence of the 5630 contribute to large-scale commercial use of the LED tube light, but the only flaw of the 5630 is so high brightness that single spacing is large, resulting in poor light efficiency, the emergence of 3020 make up for this flaw, single is 0.2W, brightness is 22-24 lm, making the brightness best combine with the light efficiency.

Precautions

The advantages of the LED tube:

High brightness, low power, energy-saving effect is obvious.

Start fast, flicker-free when started.

Semiconductor light source, no UV radiation.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

article from http://www.lighting-ledlight.com/index.php/which-led-lamp-bead-of-the-led-tube-light-is-better/

Oznake: LED tube light, UV radiation, LED flood light, energy-saving, light source, beads, brightness, stroboscopic effect, AC

How to install the LED tube light

Describes how to replace the current ordinary fluorescent lamps with LED tube light

Tools / materials

Engineering stairs

a Electric pen

a Screwdriver

An electrician

Step / methods

1.Installation diagram:



2.Replacement of the Inductive Fluorescent: after remove the starter, directly installing LED tube light

3.replacement of the Electronic tube light : remove the electronic ballast, respectively, connect the neutral wire and the FireWire to the holder.

Precautions

LED tube light and all its parts can not be exposed to any mechanical stress;

LED fluorescent tubes must be performed by professionals who are familiar with electrical knowledge to install

If you have any questions regarding the installation and use, please consult the relevant professionals or technicians.

If there is any damage or deformation on the lamp aluminum parts, do not use; otherwise there is certain danger to the product or installing;

During installation, please cut off the mains switch or separate connecting wires

Do not damaged conductive pole when installing

Please ensure that the product is installed on a stable, flat, tilt fixed place

Avoid installing the lamp at the humid place that is of high temperature, please contact the technician before install.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/how-to-install-the-led-tube-light/

Oznake: LED light, LED tube light, FireWire, LED flood light, light source, electronic ballast, Screw, driver, AC

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.