The power of the LED street lights, LED tunnel lights belongs to a class of electronic products for use outdoor, the poor working conditions puts forward strict requirements on the reliability of its work.. Surveyed and judged according to the failure analysis of the LED power , in addition what’s the factors resulting in the power failure is their own , a good power supply environment and the proper installation make a great impact on the reliability of the LED street lighting and LED tunnel lights such as the 60W LED tunnel lights, the following is need to be paid focus attention to when the LED drive power is installed and tested and used.



1 Product Description 1.1 the AC input line is the three cores , namely L, N, G test , connect the wiring and energized according to what the specifications requires ( Note: the input and output terminals of the power must be sure before the test , so as to avoid that the input voltage is directly applied on the output power ,resulting in the burned ) .

1.2 Ensure that the input voltage within the specified range of the product specification, prohibited that input voltage exceeds the scope of the requirements .

1.3 before the energized test , make sure all cables are connected properly : Ensure that the AC input line , the constant current output line and input line , constant current output line fully contact with the fixtures ( or load ), prevent poor contact caused that the test results is no exact, seriously , it may cause damage to the product .

1.4 Before testing , make sure that the load specifications , the input voltage and 1.3 is correct, then connect the AC power source.

1.5 input, output high voltage test , s the high voltage output terminal of the high-pressure machine must be connected to the L, N of the AC input line , and connect the low- end ( or the constant voltage module output ) to the fixtures, and make sure fully connect.

1.6 high-pressure test , make sure that the test voltage is within the requirements of the specifications , the test voltage that exceeds the standard requirements is strictly prohibited .

1.7 Before the test, the voltage of the high-pressure machine shall be adjusted to “03 V, mustn’t Power-on the booster until make sure that the setting of the test voltage and 1.5 is correct,then adjust the test voltage from ” 0 “V to the desired test voltage within 5-10 seconds.

Note: Do not instantly apply the test voltage on the product tested .

1.8 for the input to ground test , the high voltage output terminal of pressure machine must be connected to the L, N of the AC power line , and low pressure side terminating at cover screws of the constant module , and make sure fully connect . When testing, operation according to 1.7.

1.9 The user performing light aging , make sure the cable connection is fully guaranteed , and the input voltage are controlled within the range of allowable input voltage of the products, and prevent the large voltage consecutive beats .

Having known what should be paid attention to when we install the power of the LED street lights and LED tunnel lights,choosing the qualify LED road light is surely the key,there are a large number of excellent manufacturer engaging in researching and producing the LED street lights and the LED tunnel lights,of which Shenzhen Lead lighting is just one, the customer satisfaction and outstanding energy saving effect is the biggest encouragement of the company , Lead lighting has always been committed to R & D and production of more environmentally friendly energy-saving LED street lights, LED tunnel lights, LED High Bay Light, LED Flood Light, LED Panel,LED Ceiling Light etc with OEM&ODM service. As an ISO 9001:2000-certified factory, it can meet the strict standards of CE, RoHS, FCC certificate, these strict producing standards guarantee our products distribute smoothly both in domestic and international markets.Just browse http://www.lead-lighting.com/products/bid32-1.htm for the comprehensive performance and features of the LED tunnel lights or return the homepage for other vivid and awesome LED lights.

Article from http://www.lighting-ledlight.com/index.php/what-must-be-taken-care-for-the-power-of-the-led-street-lights-and-led-tunnel-lights/

Oznake: LED street lights, AC power, LED tunnel lights, RoHS, AC, ISO 9001:2000, LED flood light, G test, power supply, FCC