What need to be paid attention to when installing LED tube light? LED is current source, the rectifier and starter is generally not needed; the inner of the LED tube light T8 is large enough, the constant current source can be installed inside the tube. During installation, the original rectifier, starter can be removed for unused, the lamp can be directly installed. Also, the LED tube light installed is a directional lamp. The opposite direction, the lamp is not lit. The electrical expert are considering adding some conversion circuit, so even if in the case of the lamp installed backwards, the lamp also work.

LED tube

Pay attention to the voltage when installing, although there are wide voltage adaptability for the LED tube , it both can work at AC 85V – AC 245V. But voltage is too high or too low for long tine, which will affect the power factor of the constant current source, that is will cause a slight impact on energy efficiency. It would also impact on the life of the constant current source. Therefore, the LED tubes whose voltage is appropriate should generally be chosen. Such as: the electricity is 110V, the LED tubes specially designed for 110V should be used.

Another that should be noted is heat dissipation, LED tube light is equipped with the aluminum heat housing, under normal circumstances, the heat is not a problem. However, if used in a place where the dusty is heavy, the dust shall be regularly removed to prevent dust covering the radiator, result in affecting the cooling.

The waterproof is also very important, because the LED tube light is made by the upper and lower two parts: the upper part is the aluminum radiator, the lower part is the diffuser, there are gaps in the joints, therefore, fumes, water vapor must be prevented from entering. If you used wherever the fumes, vapor is heavier, preferably with a protective cover. General protective cover on it.

One last thing is the anti-vibration, LED tube light has a strong anti-shock capability. Long as not the violent impact, which usually does not cause damage. But it may makes certain effects on the soft board. The traditional fluorescent lamp is made of glass, and the inner is almost vacuum, vibration could cause an explosion, with particular attention to vibration.

Nowadays,the LED flood lamp and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood lamp is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood lamp and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/what-need-to-be-paid-attention-to-when-installing-led-tube-light/

Oznake: LED tube T8, tube light, constant current, AC, LED flood light, heavy metals