As people’s living standards improve,more and more families choose energy saving LED lamps, LED crystal lamps, LED flood light, LED energy-saving lamps and other LED lighting fixtures, but with the increased use of time we will inevitably encounter that the LED light is damaged, so today I share with you how to repair the damaged LED lamps, this experience is suitable for all LED lamps.

Tools / materials

Multimeter

Methods / steps

1.First, we must ensure that there is no problem with the circuit of the LED lamp in our own families, the main problem is that the switch has gone wrong , the switch is the focus of our detection.

2.Check the the power converter on the back of LED lights (that white box that is in the figure is the power converter), for this,the converter would be directly removed, and powered with a multimeter to measure the voltage or current, if the power converter is damaged,which can be directly purchased for the replacement, it is generally very cheap.

3.If there is no problem with the LED power converter,then we can cut the multimeter to the voltage output gear, and then place in the corresponding positive and negative point of the LED lamp to look up it will be lit or not. Replace it If it is can’t be lightened up.

4.Generally speaking, after the above three steps,60% of the LED lights problem can be solved, so our LED lights should be able to re-radiate the glory.

Precautions

Because LED lights are high-tech products and require a 220V power,we must pay attention to protection against electric shock during maintenance, and if you have doubts on the maintenance ,please check the reference material the qualify manufacturer and supplies offer.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/how-to-repair-the-led-light/

Oznake: LED lamps, LED tube light, LED flood light, Multimeter, power converter, light source, energy-saving, AC, dc