The LED floodlights are now widely used in steel mills, the lighting will be analyzed and presented in accordance with the following feed, dust, slag, casting at a different section

1.the molten iron from the blast furnace through the iron transported line to transport to BOF region for the steelmaking, the region is crane operation area where the LED flood lamp is needed. The region is characterized by the flue gas, the temperature is higher. Therefore, the fixture requires the good penetrating light, excellent themal dissipation in the subregion, there is no doubt LED flood lamp is the best light. Where the scrap is feeding is the area for crane work, the temperature is not high, the integrated suspension LED flood lamps can be used. For the Coke that is shipped to BOF, its main focus area is the coke belt corridor, transfer stations, and the characteristics of these areas like coal handling corridors, which are dusty, more vibration.

2, the main dedusting part is the electrostatic precipitator, no matter what power plants, metallurgical or other industries, there is a commonality of the precipitator electrostatic that dust is large, so the lamp used in the region must be three anti-lamps. The LED flood lamps whose IP class is 65 extremely qualified for the job.

3, slag processing, the temperature is high in the region, there is heavy smoke around where the slag is out, it is not suitable to install the lighting beside the slag heap where the more distant spot lighting is used. In order to make slag car driver without sense of vertigo,either from the projection angle of the lamp or lamps’ structure, the glare must be taken into account. The DC that can be driven at low voltage is adopted to lit the LED flood lamp,which utmost avoid the strobe.

4.Casting process is completed within a steel main plant, where the lighting is generally installed is the ceiling or wall suction on the plant steel column. because the ambient temperature is high in the casting area, regardless of installation, the performance of the Lighting Cooling must be good. Recommended that use a wall mounting (the temperature of the middle region is much higher than that of the both sides). And the cooling bed rolling zone and furnace zone are similar to the casting region. These areas are the high-temperature region, lamps must be excellent thermal performance. The shell of the LED flood lamp is made of high thermal conductivity aluminum alloy, high heat dissipation material is electrostatic sprayed on the surface of the LED flood light,which is known as excellent thermal performance.

Nowadays,the LED flood lamp and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood lamp is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED floodlight so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood lamp and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/the-led-flood-lamp-can-be-properly-applied-in-the-steelmaking-plant/

Oznake: LED tube light, LED flood lamp, slag heap, thermal conductivity, light source, blast furnace, electrostatic precipitator, dc, area