How to choose the LED light and the others

27.08.2013.

Before we purchase the energy-saving LED lights, there are several things you need to know. For consumers who do not understand the market, a qualified energy-saving lamps must be achieve high standards in the brightness, color and energy use, in addition the content of the mercy must not be exceeded tribute. After tested for more than 3,000 hours, the United States, “Consumer Reports’ released by the United States found that LED bulbs and fluorescent bulbs, LED light bulb, are among the most energy-efficient lamps.

Moreover, we can for look the manufacturer’s information online. We should check the quality of light sense in store. No matter which one you choose, please remember to buy a few to test at home. Besides, pay attention to the following aspects when purchasing and using the lighting:

First, consider configuring

When replacing the lighting, we’d better choose those which are the same as the size of the original to ensure that it can meet its original configuration. The dimmer must be use with the dimmable light fixtures and outdoor lights such as the LED flood light that are designed specifically for outdoor. By rating value, we can understand the purpose recommended by the manufacturer, meanwhile check more detailed information of the bulb specification.

Second, observe the lumen

Lumen is the illuminance (brightness) unit. In suitable brightness, choose the bulb whose power is the lowest(the wattage indicates the energy consumption). Brightness is in lumens (beam energy units) as a unit. Buy LED or fluorescent lamps (This model is generally used in lamps or other configuration, known as A-type lamps), you can use a 450 lumens of light bulb to replace a 40 watt bulb, corresponding to 800 lumens instead of 60 watts, 1100 lumens alternate the 75 watts, 1600 lumens or even higher replace 75-watt bulb. For the R30 floodlight, the bulbs whose lumens is more than 10 times than the original wattage need to be found, such as the 65-watt bulb is equal to the 650-watt floodlights.

Third, choose the color

Warm light is very lovable, so which is widely used in the most family, so Kelvin temperature (temperature unit) is lower. Standard incandescent will produce a warm yellow light, the color temperature is about 2700 Kelvin (K) or so. If you like this warm colors, then select the LED lights, you can choose LED lights that is around 2700K. If you prefer the cool, bright white light, you can choose 3500K to 4100K bulbs. Between the 5000K and 6500K, the light will be close to natural light or sunlight.

Fourth, pay attention to CRI

CRI is the color rendering index, which is to tell you the color change. CRI ranges from 0 to 100, the 100 incandescent bulbs is close to the sun during the day. The CRI of the Indoor lamp is generally recommended to 80, within 5 points difference is negligible. Comparing bulbs, you can check the different CRI values at the same Kelvin temperature.

Fifth, away from children

As a user, do not view any high-powered light, or put them anywhere the children can closely look up – High Power Flashlight, LED lights, or other similar product is not a toy, please let these things away from children who are not in custody . Also, if you want to install LED lights in public places, consider installing warning notices. At home and in the workplace, avoid cold white LED lights, especially the lights whose surface brightness is close to 10,000 cd/m2.

Nowadays,the LED flood light and LED tube light is most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light so that fully guaranteed stabe and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Resource from http://www.lighting-ledlight.com/index.php/how-to-choose-the-led-light-and-others/

Oznake: LED light bulb, LED flood light, United States, LED tube light, Lumen, lighting, incandescent bulbs, surface brightness, Consumer Reports

<< Arhiva >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.