When choosing LED lamps, it is undoubtedly that we take into account the more energy-efficient, environmentally friendly, no flicker, but in the case of long-term use, LED lamps also easily suffer from wear and tear, plus some wrong operation, the LED lamps can be easily damaged. the LED lamps as the third generation of high-tech energy-saving lighting also need a good maintenance in order to maximize the effectiveness and have a longer service life. With the popularity of LED lighting in 2013, more and more consumers also raise issues about the small series of LED maintenance, the experts have invited to answer it.

What circumstances make the LED lamps be bad?

A) poor quality of the LED lamps tend to be broken,recognize the quality assurance brand to buy.

2) the LED lamps that are not properly used in accordance with product instructions prone to failure, there is a risk.

3) When used,the excessive current exceeds the rated current of LED lamps, some components of the LED driver power will result in the breakdown or burned and other hazards.

4) LED lamps “mist” issue, after the pointed candle light, bulb lights, LED flood light and other lights is lightened up for a while,there is water droplets on the inner wall of housing, which is the mist phenomenon. LED lamps are generally the assembly of several different materials, for instant,the heat part of the lamp cup is made of the metal, the lampshade is made of the plastic; lamps generate a certain amount of heat at work, different materials with different coefficients of thermal expansion, a gap is generated at the inlet in the bonding of different materials after extensive use; when used in an environment where the humidity is relatively large, the inside and outside of the lampshade is of different temperature, the gases heated of the internal lamp shade is cooled, if this gas contains more water vapor, which will produce the phenomenon of water
fog and water droplets, continue to light for some time, this phenomenon will disappear. Therefore, humid environment is also the factor affecting the LED lamp life.

LED use rules and methods for maintenance:

First, having bought the lamps, not busy installing, we should carefully read the installation instructions, and then follow the installation instructions to install the lighting, otherwise there may be dangerous.

Second, when cleaning and maintain the LED lamp, do not change the structure of light, do not arbitrarily change the lamp parts, having maintained, we should installed the lamp as-is, not to leave and wrongly install the lighting components;

Fourth, try not to frequently turn on and off when using the lamps, although resistance switching times of the LED light are 18 times more than those of the ordinary fluorescent lamp, but too often still affect the life of the internal electronic components of the LED lights, thus affecting the lamp life.

Five, in particular, note that the ordinary LED lamps should be avoided using in wet environments, except special LED lamps,. , Humid environment will affect the electronic components of the LED lamp driver power, electronic components is affected by damp, which will shorten the lamp life.

Therefore, moisture-proof is the key of maintaining the lighting, especially the LED light lamp in the bathroom, the bathroom and the kitchen stove must be installed dampness shade to prevent moisture ingress, corrosion damage or leakage so that avoid short circuit.

Finally, it is best not to use water to clean LED lights, just use a dry cloth that is dipped in water to wipe, if you accidentally hit the water,then try to dry, avoid immediately wiping with a wet cloth after the lights is lightened up.

Warm TIPS:

1) LED lights can not be used in the circuit of the ordinary lamp dimmer, delay switch, sensor switch.

2) Avoid using in high temperature and humidity environments

3) LED internal lighting is mainly supply-driven, recommend non-professionals do not self-handling assembly, in order to avoid electric shock hazard.

4) LED lighting lamps are generally used in the ambient temperature of 5 ~ 40  circumstances.

5) the metal part of the LED lighting can not be free to use polish powder chemicals.

6) properly use the dry cloth or duster suitably to clean the dust behind the LED lighting.

Having known how to maintain the LED light,beyond doubt, choosing the excellent enterprise specializing in researching and manufacturing LED lighting is also the key. Fortunately,there are a large number of excellent manufacturer engaging in manufacturing and researching the LED light,of which the lead lighting is just one,lead Lighting adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light, which fully guaranteed stability and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while the low voltage constant current driver convert the AC into DC so that improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is famous for energy-saving and environmental protection ,login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/68/