car obd2 tools

How to change voltage in USB UPA V1.3

This is Tutorial is from obdexpress.co.uk office blog how to raise voltage from 3.3v to around 3.7v for a UPA-USB device programmer as 3.3 don’t read some chips and 4.8 is too high for some.

Purpose:
Raise voltage via UPA USB V1.3

Device used:
UPA USB V1.3 hardware test pass 100%

Reason for voltage change:
reading s93a66…. fine but wanted to transfer data to 93c66 and wouldn’t read or write on 93c66 until I set jumper to 4.8v

UPA programmer voltage:
Options in program are only 3.3v or 4.8v controlled by jumpers


Optional solutions:

Check jumper 3.3V/ 5V
There are two series diode to drop 5v to 3.3v around 5/3.3v jumper. Try to make short to one of them now the 3.3v setting will raise about 0.6v but don’t know if the voltage monitoring circuit will report a problem!
or check the variable resistor in the UPA USB programmer
UPA-USB-Resistor
I read that ‘that’ was a fuseable link
It used to have a component marked N1 which was a fuse
It protect 5V power from top board to bottom board
when have the short circuit, it ‘ll change resistor first to protect other item.
After that, we need change it. can use fuse instead it

Disclaimer: You will try on your own risk!!
Source:http://blog.obdexpress.co.uk/2017/05/30/upa-usb-programmer-raise-voltage-from-3-3v-to-3-7v/

30.05.2017. u 09:58 | 0 Komentara | Print | # | ^

How Remove LAUNCH ICARSCAN Software from your phone?


Here is a step-by-step guide to show youHow remocar diagnostic software and special function software from your phone


1. Turn on your Android/IOS phone to find the main APP ) and software APP ( US&Europe car, Asia1 car , China ), such as picture:


Remove LAUNCH ICARSCAN Software logo (1)





2.For example, you want to remove LAUNCH ICARSCAN US&Euro car,


2.1 Click this icon Remove LAUNCH ICARSCAN Software logo (2), you will see:


Remove LAUNCH ICARSCAN Software APP (8)





2.2 Click OK , The page will turn to EZdiagAPP





Remove LAUNCH ICARSCAN Software(4)





Remove LAUNCH ICARSCAN Software(5)





2.3 Turn off EZdiag APP and go to US&Euro car APPRemove LAUNCH ICARSCAN Software logo (2) , Click login


Remove LAUNCH ICARSCAN Software(6)





2.4 The page will turn as this picture :





Remove LAUNCH ICARSCAN Software(7)





2.5 Finger Hold the screen for 3 to 5 seconds, the screen will turn to this page:


Remove LAUNCH ICARSCAN Software message (14)





2.6 Click OK, in this way, You can delete all the US&Euro car of diagnostic software.





3.If you want to remove icarscan special features and Asian1 car models diagnostic software,


3.1 Click Remove LAUNCH ICARSCAN Software asia1 logo (9)





Remove LAUNCH ICARSCAN Software APP (8)


3.2 Click OK , The page will turn to EZdiag APP





Remove LAUNCH ICARSCAN Software(10)





Remove LAUNCH ICARSCAN Software(11)





3.3 Turn off EZdiag APP and go to Asia1 APPRemove LAUNCH ICARSCAN Software asia1 logo (9) , Click login





Remove LAUNCH ICARSCAN Software(12)





3.4 The page will turn as this picture :





Remove LAUNCH ICARSCAN Software(13)





3.5 Finger Hold the screen for 3 to 5 seconds, the screen will turn to this page:





Remove LAUNCH ICARSCAN Software message(8)





7. Click OK in this way, You can delete all the Asia1 car of diagnostic software.


Source:http://blog.obdexpress.co.uk/2017/05/28/how-remove-launch-icarscan-software-from-your-phone/




29.05.2017. u 04:03 | 0 Komentara | Print | # | ^

Vxdiag Multi Diagnostic Tool: Rheingold Techstream IDS 3 in 1

This is VXDIAG Allscanner for BMW TOYOTA FORD/MAZDA.

This vxdiag multi diagnostic tool is called VXDIAG A3.
vxdiag-bmw-toyota-ford-mazda
Allscanner vxdiag a3 can be performed as a combination of BMW ICOM A2, Vxdiag vcx nano Ford/Mazda, and Vxdiag vcx nano Toyota.

Professionals @obdexpress.co.uk tested its functionality and verified it’s working 100% no issues in OBDII diagnostics, coding, key/ ecu programming.

Vxdiag a3 diagnostic tool on BMW works as ICOM A2
wifi-bmw-icom-a2-b-c
Vxdiag A3 and Bmw software worked!

ISTA-D 4.04.12………diagnose OK
ISTA-P 3.60.2.001…………….program OK
BMW ETK: 2017.2………read electronic catalogue OK
BMW KSD 09.2016………..read commercial service data OK
BMW Engineer Software:
– INPA………diagnose E series OK
– NCS………..coding E series OK
– WinKFP………..programming E series OK
– E-Sys 3.27.1, Psdzdata 59.0)……..coding f series OK
BMW FSC code generator
BMW AiCoder



Vxdiag a3 on Ford/Mazda works as VCM2 clone or Vxdiag vcx nano for Ford/Mazda
best-ford-vcm-ii-wifi
wifi-version-vxdiag-vcx-nano-for-ford-mazda-ids
Vxdiag A3 with Ford IDS software is good at Ford diagnostics and programming as VCM2 china clone and Vxdiag vcx nano Ford do, incl.

Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
Live Data-stream with Recording & Playback Functions for Main ECUs
Read & Clear Diagnostic Trouble Codes (DTCs)
New Software Re-flash for Existing ECUs
Set, Adjust or Remove Speed Governors
Automatic vehicle recognition
All Other Dealer Functions
Guided Fault Finding
Steering Angle Resets
Program New Keys
DPF Regeneration
Brake Bleeding
Injector Coding

The important tip: VXDIAG NANO vs VCM II : Which is better?

Full chip high quality VCM II (SP177-C1) better!
But be careful programming!



Vxdiag a3 on Toyota works as well as Vxdiag vcx nano for Toyota
vxdiag-vcx-nano-for-toyota
Vxdiag A3 Toyota performs well with Techstream software for Toyota/Lexus diagnostics and customizing setting.

Some of the more memorable ones are:
Program and erase my own keyless remotes, FOB’s, Smart Keys, Etc….
Change DRLs on or off
Change light sensor for when headlights come on or go off with AUTO mode
Make it so windows roll down when you hold down unlock on your remote for 2.5 seconds.
Roll up/down windows by turning key in the door lock for 2.5 seconds
Turn on or off seatbelt warning buzzer
Turn beeper on/off for doors locking and unlocking with remote
Change door locks on/off when shifting FROM park
Change door locks on/off when speed over 15mph
Change door locks on/off when shifting INTO park
Change doors locks to unlock all doors 10 seconds after driver door opens.
Change delay for how long headlights stay on after ignition off.
Program your TPMS sensors to your vehicle if you get a new/replace one.
Shows temp inside tires, and actual pressure inside each tire including spare.
Every switch in the car is displayed with it’s current status.
Press the Cruise control Accel stick up and it shows that switch is now on.
Pull the stick and it shows the cancel button is now on.
Push window down button and it shows window down button on.

Every imaginable sensor, temp, flow, psi, that’s on the vehicle is displayed to you.

….

Enjoy!

Source:http://blog.obdexpress.co.uk/2017/05/25/vxdiag-multi-diagnostic-tool-rheingold-techstream-ids-3-in-1/

26.05.2017. u 03:29 | 0 Komentara | Print | # | ^

How To Use MAN VCI Lite Truck Diagnostic Tool


Looking for a MAN truck diagnostic tool? MAN VCI Lite… here you go. Just like DAF VCI Lite, a professional truck diagnostic tool for a specific brand, to perform diagnosis, actuation and parameter viewing.





MAN truck diagnostic tool for sale: MAN VCI Lite


Source: http://www.obdexpress.co.uk//man-vci-lite-diagnostic.html





MAN VCI Lite price: €685





MAN VCI Lite, what can & cannot do:






MAN VCI Lite truck diagnostic tool, how to use:





man-vci-lite-diagnostic-6 man-vci-lite-diagnostic-7 man-vci-lite-diagnostic-8 man-vci-lite-diagnostic-9 man-vci-lite-diagnostic-10 man-vci-lite-diagnostic-11 man-vci-lite-diagnostic-12 man-vci-lite-diagnostic-13 man-vci-lite-diagnostic-14 man-vci-lite-diagnostic-15 man-vci-lite-diagnostic-16


In summary, MAN VCI Lite clone is good at trucks obdii diagnostics, actuation, measured values display and so on, works 95% as the original truck diagnostic tool. And it covers up to 95% of org T200 capabilities.





The only demerit-


The clone MAN VCI Lite can not see the ignition, and users need go to individual modules for test all work, can not use the quick test.

11.05.2017. u 08:52 | 0 Komentara | Print | # | ^

<< Prethodni mjesec | Sljedeći mjesec >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.

< svibanj, 2017 >
P U S Č P S N
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31        

Siječanj 2024 (7)
Studeni 2020 (1)
Rujan 2020 (2)
Kolovoz 2020 (2)
Srpanj 2020 (2)
Lipanj 2020 (2)
Svibanj 2020 (1)
Ožujak 2020 (1)
Prosinac 2019 (1)
Lipanj 2019 (1)
Travanj 2019 (1)
Ožujak 2019 (1)
Prosinac 2018 (2)
Listopad 2018 (2)
Srpanj 2018 (2)
Lipanj 2018 (1)
Svibanj 2018 (2)
Travanj 2018 (4)
Siječanj 2018 (2)
Prosinac 2017 (1)
Studeni 2017 (1)
Listopad 2017 (3)
Rujan 2017 (4)
Kolovoz 2017 (2)
Srpanj 2017 (3)
Lipanj 2017 (3)
Svibanj 2017 (4)
Kolovoz 2016 (4)
Ožujak 2016 (4)

Dnevnik.hr
Gol.hr
Zadovoljna.hr
Novaplus.hr
NovaTV.hr
DomaTV.hr
Mojamini.tv

Opis bloga

Linkovi