use tutorial
The next portion is Allscanner VCX Heavy Duty Diagnostic installation straightforward information:
1. Set up OEM Computer software
Have to to start with set up the OEM application! Based on
Your products configuration, solution to install:
TIS Techstream
HONDA Diagnostic System
VIDA2008C
2. Set up VCX32 Driver
This phase Must be followed after stage one
one)To put in VCX32 Driver as follows:
Double-click VCX32 Driver Install.exe, click NEXT.
2)Read License agreement and select accept the terms on the License agreement, click NEXT.
3)Input user facts, click NEXT
four)Choose form of installation:finished Install, click NEXT
5)Willing to install, click NEXT to stat.
six)Installing????
7)Display VCX USB Driver Installation Wizard, click NEXT
eight)Driver Setting up????Driver Set up completed, click Finish
9)All Set up full, click Finish
3. Set up OEMSetup
Depending on your products configuration, alternative to put in the help driver for OEM: Start->Program->ALLScanner->VCX32-OEMSetup
four. Connect Hardware
Really need to connect hardware specifically prior to diagnosing: PC-usb cable-VCX-DTC cable-truck.
VCX get energy from car via DLC cable. The LED will flash consequently after hardware proper connection. Energy Led preserve on. VCX connect with Computer as a result of USB cable.
five. Install VCX USB Driver
one) Connect VCX USB cable to Computer by the initially time, it will hint that new hardware was located, please refer to the next: Show Found New hardware wizard, Decide on No, not this time, click NEXT.
two) Choose Set up the software package automatically, click NEXT
three) Click Continue Anyway
four) New hardware wizard finished, click Finish. Found new hardware wizard, is going to be displayed once again, operation is identical as above.
six. Check VCX Connection
Please verify the next ahead of connection
testing:
? Connect hardware based on section four.1
? Set up USB Driver as outlined by area four.2
Double-click DeviceConfig to the desktop.
one)Choose the Connect webpage.
2)Click Connect
7. Activate VCX Device
1) Connect hardware, Open DeviceConfig
two)Show as over Fig, it demonstrates device was not activated. Click Ok, And Click Connect.
3) Choose the Device Activate web page, Make sure you record Device SN and Energetic Code, provide them to dealer for License (Activation file)
four) Right after getting License file, click Choose License to select this file.
five) Click Activate, Display the Gadget is activated, it exhibits Activation productive. ClickOK
8. Configure Wi-Fi network
one) Please confirm the next before making use of:
? Use only the wireless router integrated while in the package deal
? 802.11a/b/g wireless card required for Laptop Connect VCX to Automobile and get energy from it. Turn about the wireless router.
Very first, Make Laptop to connect to the wireless network:
Net Name(SSID):DIAG-WIFI
Connect KEY:1234512345
2)Open DeviceConfig, Select the WiFi Configure web page, and choose WiFi. Then click Scan WiFi.
3)Immediately after an effective scan, it is going to listing all products with IP. Then pick the IP of device, and click Connect to connect with Device.
four)Warning Any improvements on the wireless router would lead to the device to not function.
Study the full facts at: http://www.uobd2.net/upload/service/vcx-hd-heavy-dut-truck-diagnostic-english.pdf
Wish to purchase Allscanner VCX truck diagnostic tool: http://www.uobd2.net//allscanner-vcx-hd-heavy-duty-truck-diagnostic-system-1843.html
Allscanner VCX Heavy Duty Diagnostic use tutorial
30 studeni 2012komentiraj (0) * ispiši * #
