MVCI cable from uobd2.net installation adviser English

22 veljača 2012

MVCI cable from uobd2.net installation adviser English

Lately, some users have trouble on how to install MVCI, assuredly need our engineers' help. Then how to use MVCI? As all known, MVCI cable worked car brand comprise Honda, Toyota, Lexus and Volvo, additional software is alone to install, so compared to other diagnostic tool, it is not easy to operate. But with our installation manual as follows, you will find it is not difficult to setup.



What you should notice when you operating this tool?
1. Be sure to setup and run the device software under windows XP.
2. Please choose area EUROPEAN when you installing the software. Then it will not ask you for activation code.

Check the abundant accession adviser as follows:
http://www.uobd2.net/upload/service/mvci-cable-user-manual.pdf
-MVCI cable user manual

http://www.uobd2.net/upload/service/toyota-tis-installation-guide-english.pdf
-Toyota TIS installation guide

http://www.uobd2.net/upload/service/honda-hds-installation-guide-english.pdf
Honda HDS installation guide

http://www.uobd2.net/upload/service/volvo-vida-installation-guide-english.pdf
Volvo Vida installation guide

Send trackback to:
http://uobd2.canalblog.com/archives/2012/02/22/23582973.html

VCS Interface Vehicle Communication Scanner

16 veljača 2012

VCS Interface Vehicle Communication Scanner

Today I introduce a full new universal car diagnostic scanner which named as Vehicle Communication Scanner VCS Interface. VCS interface works as car diagnostic tool and cover more than 100 makes car models.


Vehicle Communication Scanner VCS Interface highlights and advantages?
Works with Over 40 makes, 1,000 vehicle system, --including CANBUS systems
Access to Power train, Chassis and Body systems
One click "Quick Test" button to scan all ECUs
Live data display with waveform displays
Component-level and System-level activations
Reset and clear adaptations, calibrations and service functions
Hyundai and VW/ Audi immobilizer special functions
ECU initialization and coding
SAE J2534 "Pass-thru" ECU reprogramming
Nissan/ Infiniti idle speed self learning function
Frequent Internet software updates
Multi-language for international market demand
"PC-link" functions for PC operations
Free to test cars within 50-100m
(Distance depends on environment; the above distance is for reference only.)



VCS interface functions:
Read & Clear Diagnostics Fault Codes
VCS easily read & clear vehicle specific information - manufacturer specific codes, factory codes, and fault codes on a particular electrical circuit. Our advice: don't forget to print it out in real time.

Quick Test & Quick Delete (select software)
The Quick Test feature allows you to quickly scan all systems in the vehicle, identify controllers with faults and provides immediate access to those systems without having to navigate through multiple menus. Our advice: Don't forget to print it out in real time.

Read Live Data
Fault codes & live data is the basics of electronic diagnostics. Experience high-speed response rate of 8-10 frames per second w/ real-time troubleshooting of up to 4 graphs. Diagnose signals for rich or lean conditions with live data retrieval and viewing of modules in digital and analog format. Our advice: Don't forget to print it out in real time.

Component & System level actuations test
Perform verification tests to validate the functionality of a particular electrical circuit. This function will bypass time-consuming labor to check the workmanship of electronic components such as switches, sensors, relays, & actuators. Use the VCS to actuate control modules and see what needs replacement without removing panels and testing without the usage of a multimeter. (e.g. cylinder power balance test, EVAP system leak, EGR valve, solenoids, power windows, winshield wiper activation, etc.)

VCS interface Special Functions:

Service Resets & Initialization:
When components (e.g. injectors, switches, mass air flow sensor, cooling temp sensor, etc.) are replaced within a module, a vehicle will run very rough. Initialization immediately re-adapts all the values, so the components will be recognized by the vehicle system. (e.g. To reset the service indicator for the vehicle such as "oil service", "service reminder light", "steering angle sensor*", etc.)

Vehicle Adjustment:
Vehicle Communication Scanner VCS is able to adjust performance parameters. (e.g. idle RPM, idle speed adjustment, ignition timing, vehicle w/ immobilizer, set fuel synchronization, throttle-body relearn, DME Alignment, etc.)

Coding & Programming:
Read & change coding has now become highly important for any new retrofit control unit in the vehicle. Contact VCS Dealer for more information.

Other Functions:
Self-learn Function
Create a personalized database system to record ideal conditions of the actual values in the vehicle system.

Record 160 Frames of Live Data
Record a real-time data stream up to 160 frames during a drive cycle. More complicated diagnosis of an intermittent problem will require the use of this function to evaluate data stream during a controlled drive cycle

VCS interface
working conditions, operate windows system and specification
Power Supply: 8-12VDC, 110-250VAC, 50HzConnection: Wireless or USB
Minimum PC System Requirement (Not included):
Windows XP or Vista
CPU 300MHz
256MB RAM memory
1GB Hard Disk Memory
CD Drive
Working Temperature: 10 - 176oF (-10 - 80oC
Humidity: < 90%
Dimensions: 20" X 14" X 6"
Weight: 17.6 lbs

Send trackback to:
http://blog.uobd2.net/autoboss-pc-max-replacement-vcs-interface-vehicle-communication-scanner/

V-Checker A302/A303 Multi-Function Trip Computer FAQ

01 veljača 2012

V-Checker A302/A303 Multi-Function Trip Computer FAQ

Q: What is the application car model of the trip computer V-CHECKER A302 and er.html target=_blank>V-CHECKER A303?
A: V-CHECKER A302/A303 is for the VAG, Skoda, Audi models. For example, the model V-CHECKER A302 support: Sagitar, Touran, Audi, Golf, Octavia, Magotan, Scirocco, Caddy. A303 Supported models: Polo, Golf, Passat, Bora and more.
Q: Why the driving speed displayed on the computer is lower than the car dashboard displays?
A: Almost all of the car speed displayed on the meter is not accurate, mainly at the security depot, design, 2-5% higher than the actual speed, that is someone on the freeway 140Km / h, says has not been photographed speeding, in fact, the real speed at this time is 120Km / h.
Q: Why is getting slower and slower speed but the instantaneous fuel consumption per hundred kilometers are getting higher and higher?
A: When the car is in neutral sliding, the oil consumption is not 0 as everyone thought, Look at the formula: = instantaneous fuel consumption per hundred kilometers (100 * Cumulative injection volume) / (speed * time). This time, less fuel injection engine, low speed , need to take more time if travel 100Km, when the speed is very low, the time is almost infinite. According to the formula, this time the instantaneous fuel consumption per hundred kilometers shown to be growing. Note: The instantaneous fuel consumption per hundred kilometers! = fuel injection quantity ah!



Q: Does the trip computer A301/A303 need to be upgraded, how to upgrade?
A: Generally speaking, if A301 using the normal, we do not recommend vehicle owners to upgrade, of course, we have been upgrading and improving the features of the A301 continuously. Owners can contact your local dealer to upgrade.
Q: Why setted the reminder function of shift, when the speed reaches a setted value, trip computer do not remind.
A: The shift to remind does not work under the cruise mode, only in the competitive mode will remind you.
Q: Where is the car’s OBD diagnostic interface.
A: The location of the diagnostic interface principles: take the driver as the center, radius of 0.5 meters, the driver’s reach out and touch range. The specific location of OBD diagnostic interface, there is no uniform standard. Usually under the steering wheel, at the top of brake pedal. If you still can not find the diagnostic interface, please contact your local 4S shop of the model.
Q: How to set fuel consumption factor?
A: The fuel factor is used to adjust the "instantaneous fuel consumption, the current default: 331, the coefficient is based on a complex formula and experience in numerous tests of the car. Does not advise clients to change. If the vehicle was modified or age of the vehicle too old, causing the vehicle sensor aging, drift. Customers can adjust according to their proportion of the actual situation of the vehicle. Such as: fuel consumption factor = 331 +331 * 10% = 364, the instantaneous fuel consumption is increased by 10% on the original basis.
Q: Is there any way to test V-CHECKER A302/A303 reading car fault code safely?
A: You can open your car hood, disconnect the oxygen sensor or throttle position sensor like the plug. Start the car, usually over 4-5 seconds, the engine fault light comes on, V-CHECKER A302/A303 will alarm when you open the key. And precisely shows the problem.

Q: When using the trip computer, open the key to driving sometimes the computer does not start automatically, lights flashing alternately.
A: This is because the car battery voltage is too low, trip computer into hibernation in order to protect the battery. At this point press any button to start. You can also start the car, when the voltage rise it will starts automatically.
Q: V-CHECKER A302/A303 how to display real-time fuel consumption?
A: Switch to the competitive mode, as shown in the middle of the first line of real-time fuel consumption,if you want to see instant fuel consumption, can set competitive mode to travel mode.
Q: V-CHECKER A302/A303 crash into the competitive mode, restart.
A: Upgrade to V3.24 or newest version.
Q: The outside temperature has been shown as 0. .
A: Some models (such as some of the old section Passet 2.0 model) is not configured outside temperature sensor, trip computer can not read.
Q: How do I change car settings? How to restore factory settings?
A: First tune out the hidden menu, and in the hidden menu, select [Select Model] or [Restore Factory Settings]. Bring up hidden menus. Method One: Unplug the OBD connector -> while holding down the [previous] [next] [OK] three keys -> plug in the OBD connector> display the first image -> release the button.Quickly followed by [next] [next] [last] [OK] [C] Method Two: (V3.24 or higher version) Unplug the OBD connector -> plug in the OBD connetor - "Show the first image -> quickly press the [OK]
Q:Why my car is equipped with reverse radar but do not show reverse picture.
A:A303 without reversing radar display. V-CHECKER A302 with reversing radar screen, but only support part of the original reversing radar. If the display screen did not show reversing, you'd better closed the reverse radar function in [instrument settings].

Learn more at:
http://www.uobd2.net//v-checker-a302-vag-multi-function-trip-computer.html

Send trackback to: http://blog.uobd2.net/v-checker-a302a303-multi-function-trip-computer-faq/

<< Prethodni mjesec | Sljedeći mjesec >>

Creative Commons License
Ovaj blog je ustupljen pod Creative Commons licencom Imenovanje-Dijeli pod istim uvjetima.